AutoCAD Civil 3D :: Using Copy Command Within Drawing?
Jul 8, 2013
Any issues when copying certain object within my drawing from one part of the drawing to another, after selecting the objects I want to copy, I select the destination point and I cannot see any of the objects that I am copying, the command stops working and then I cannot see any objects in my drawing at all....its like I am zoomed out all the way and nothing is in my drawing...I save the drawing as is (seeing nothing on my screen)...calling it up again and all my linework, etc. is there again...it has happened in two different drawings so far within the last few months, and these dwgs. are not linked to each other at all....
View 2 Replies
ADVERTISEMENT
Aug 3, 2011
I recently upgraded to Civil 3D 2011 from C3D2010. I have used the same ACAD.PGP file for years that includes the shortcut C for the COPY command. Up until C3D2011 this would always allow me to copy an entity multiple times, (the default when COPYMODE is set to 0).
I am running C3D2011 64bit on WIN 7 64bit OS. It happens with other commands too that use a dialog box normally, i.e. INSERT - it only brings up the command line version of it.
View 5 Replies
View Related
Apr 9, 2013
when i try to copy drawing,''copyclip unkown command' showed up, what should i do
View 1 Replies
View Related
Aug 5, 2013
I have text from dt command, circle and leader line. After selecting them I use the copy command and starte pasting all over my drawing. Probable about 6 copies. about 3 or 4 of them end up not being able to select them. So if i want to edit the text, move all three entities or just delete them i cant. I figured out the only way to delete these "unselectable" objects i copied is to only have that layer on, type selectall and delete. Why this happens and why if i did 6 pastes it only happens to 3 or 4 of them? does it have to do with feature lines? I do have 3d lines in this dwg but i should still be able to select what i copied.
View 7 Replies
View Related
Nov 28, 2012
When I first created my surface model, any point I moved would snap back to its original position like a rubber band. I had to do some edits so I unlocked this by .... Survey Tab>My survey database>Survey Points>Points, and then picked "Unlock In Drawing". This command unlocked All points in the drawing so I could edit them.
Now that I am done with my edits, how do I reverse this command globally, so as to get ALL points locked again (so they snap back to their original position like a rubber band if moved, like before) ?
View 2 Replies
View Related
Sep 13, 2010
Can I do that? I want to import a surface from another drawing to my design drawing.
View 4 Replies
View Related
Jun 25, 2013
I have not done this for a while, but I remember you have to click somewhere otherwise all you see is an empty viewport in the new drawing.
View 2 Replies
View Related
Mar 11, 2011
I would like to copy cogo points from one drawing to another, keeping both their layer and user defined properties.
I can:
1. Do a copy and then paste to orginal co-ords. This keeps the layers but loses the UDP's.
2. Export the points to a csv and import into new drawing. This keeps the UDP's but loses layers
3. Export to XML. This loses both Layers and UPD's
I don't have a desc key file setup for the codes on these pts so this is not an option.
View 9 Replies
View Related
Oct 17, 2012
I am trying to work a routine that will draw tangents with or without curve in a profile by calling the command in the Toolbar icon to "Draw Tangents" button that is on the Profile Layout Tools toolbar. I can't seem to locate the command that I could execute at the comand line or in LISP. Where can I find a complete list of C3D commands to reference?
View 3 Replies
View Related
Jan 3, 2013
I'm using AutoCAD 2013 that came with Building Design Suite (Revit) and the copy command terminates after making the first copy, instead of continuing to make multiple copies until I terminate the command. Is there a switch to control this? A sysvar?
View 2 Replies
View Related
Apr 21, 2013
I have a 3D file (not of my creation) that gives me some problems when I try to copy it (it is a 3D building).
The problem is that, when i click on "copy" command, I can select a point but then AutoCAD crashes and it takes about 30 seconds to return working a normal way and permit me to paste it. (it happens with "move" command too)
Otherwise, if I use "copy with base point" I have no problems: after a second I can paste it where I want.
How can it be possible? Cause if sometimes I mistake and digit "copy", I always have to wait the long Autocad response.
This problem happens with both autocad 2012 and 2013 and it doesn't happen with other 3D files I have. The drawing is made mainly of meshes.
I have a Dell notebook and a NVIDIA Quadro 2000M video card, so you can understand I don't like this problems: I spent a lot of money for something I hoped could work well with AutoCAD.
About that, aren't there drivers for the graphic card? Cause when I click on "check for updates", autocad says me that there are newer version of the driver, but then it says me that it is impossible to update it (I have a connession and a student version).
View 4 Replies
View Related
Jan 11, 2013
i have various files which I cannot copy elements of into other drawings.
when i use the ctrol+copy command, I get the "copy to clipboard failed". This has only started since I upgraded to AutoCAD2012.
View 4 Replies
View Related
Dec 10, 2013
Eventually after I copy and paste with the clipboard enough times within one drawing, the ability goes away and I can no longer copy and past one item from one drawing to a separate drawing. I need to use the clipboard function because that is the only way of getting an item from one drawing to another.
I have download a clear clipboard function but it doesn't work. Closing CAD and restarting does not reinstate the function.
View 5 Replies
View Related
Sep 20, 2013
I've recently made a new drawing template with ilogic prompts for entering data for all fields within the template. It also sets view sizes etc. I have lots of master drawings, which are reused when sizes etc change for a contract, which i would like to transfer to this new template. Drawing Resource Transfer Wizard does not offer this function.
I could get all drawings in a folder copied to specific sheet size on the master template.As the template will probably be developed further in the future I'm very loathed to do this take manually.
View 6 Replies
View Related
Jan 17, 2013
I am trying to copy and paste a surveyors drawing into a drawing I've been working on to place my building on the site for oreintation etc.
When I copy and from his drawing onto my clipboard and paste it into mine it is waaaayyyy small.
The scale his drawing says it is drawn in is 1:1
Mine is 1/4"=1'-0"
When I xreffed it into my drawing it did the same thing. What do I do?
View 8 Replies
View Related
Mar 9, 2012
Is there a way to change the key-in for "Copy" to "C" and then "Circle" to something else?
View 9 Replies
View Related
Sep 17, 2013
I'm doing a work where i need to copy many layouts. I can set a few at a time, but doing one at a time is faster (in the end). However, rightclicking the mousebutton on the layout, copy it and scroll to the bottom to 'place at end' it time consuming.
I rather have a lisp of some kind that can copy the current layout and place it at the end (most right) of the layout tabs.
if it is possible with some -command (commandbar) i can do it myself, but i can't find any command to do so...
View 1 Replies
View Related
Mar 25, 2011
In the current drawing I am working in, when I copy a viewport using CO command it copies the viewport but nothing is seen in it. You cannot active it like a normal viewport; it turns into just a square. I do not have this problem in any of my drawings, just this one. If I copy the viewport by right clicking copy with a base point then paste it in the drawing, the viewport works fine. This is more time consuming then just using the CO command.
View 9 Replies
View Related
Jan 26, 2013
In AutoCad LT 2013, on Windows 8, I experience a 1/5 - 2 second delay afte 'enter' on a Copy command. The enter may be used in either right-click command or spacebar modes. This is the only delay I am experiencing in any command used so far. Other than that, the 2013 is flawless in Windows 8.
View 1 Replies
View Related
Feb 23, 2013
Is there any way to use the copy command in such a way that the new objects are selected when I'm done copying? Perhaps a LISP of some kind?
View 6 Replies
View Related
Jun 16, 2013
i have a 1000+ table i need to put there formation Level which one i need to subtract from PGL level so any .lisp or any method how to subtract it if manually i need to minus each value from PGL
suppose my PGL at offset 5 is 105.452 so i need to show on offset 5 Formation Level so i will minus 105.452-.63=104.822 is Formation level is there any good option to subtract table automatically
View 4 Replies
View Related
Nov 2, 2011
I have a user that is having a problem with two particular drawings within AutoCAD.
drawing 1 is 4MB
drawing 2 is 17MB
I believe he is attempting to copy some data from drawing 2 to drawing 1.
*nearly* Everytime he opens these two files and switches to 'Model' autocad crashes displaying the message -
--------------------------- AutoCAD LT Alert ---------------------------
AutoCAD LT cannot continue. You can attempt to save changes into the following file up to the start of the last command: S:****************
After you save your changes, you can open or recover the file.
Should AutoCAD LT try to save your changes?
--------------------------- Yes No ---------------------------
View 9 Replies
View Related
Oct 10, 2013
Version of the CHSPACE.lsp command that has a "copy" option like the one from Intellicad?This version makes a copy of the selected objects first then moves them into the space you want, leaving the original objects alone in their original space.
View 3 Replies
View Related
Nov 1, 2013
how to add macros to my ACAD 2014 to count blocks, I managed to lose the "copym" command while trying to figure how to create a button in the user interface found in the ribbon bar under the customization tab...when I type copym into the command line, it wants to prompt me to finish the command string using the command "copymode" and doesn't even see that the command "copym" even exists in the list that is created. (the list that's created by an autocomplete function)
I found the command in the list while making a pull down menu item selection button for "copym" utilizing the user interface in the ribbon. I drug the command info for "copym" to the menu bar using the user interface feature. The command is there, all the info seems to be correct, I even managed to make a menu selection for it in the pull down menu. But when I select that menu item, the command line says: UNKNOWN COMMAND "COPYM" Press f1 for help.
I think I accidentally deleted something, just wondering how I can get my "copym" command function back into AutoCAD from never-never land.
View 3 Replies
View Related
Nov 22, 2011
With the code below the draworder is not retained , does anynone knows how to retain the draworder in a .net copy command?
Function MaakKopie(ByVal objIds As ObjectIdCollection) As ObjectIdCollection
MaakKopie = New ObjectIdCollection
Dim doc = Application.DocumentManager.MdiActiveDocument
Dim dwg = doc.Database
Using doc.lockdocument
Using transactie = doc.TransactionManager.StartTransaction()
[Code]....
View 2 Replies
View Related
Jan 13, 2011
get any further with VB.net I'm trying to (re)create some autocad commands (and a own features, eventually).
I'm trying a move command now.A recreation of the Autocad command.
The selection of object works. Moving the set between two points works. The only thing thats too advanced for me is the drag posibility VB offers.
View 9 Replies
View Related
Jul 9, 2013
I am using AutoCad 2014
I want to paste text (numbers) into the command line as I am drawing a line.
In AutoCad 2011/2012 if I paste (CTRL+V), then the numbers in the clipboard will be pasted into the command line and all I have to do is push enter.
In AutoCad 2014 if I paste (CTRL+V), AutoCad will paste the clipboard contents as an mtext object into the drawing.
How do I change the behavior of AutoCad so that I can use "CTRL+V" in the command line?
For clarification these are the exact steps I am trying to do:
1. {type L}
2. {click a point in the drawing}
3. {type CTRL+V} // paste a number as a distance into command line
4. {type ENTER}
I know I can right click the command line and select paste. This option is unnacceptable for my use. I want to be able to CTRL+V text into the command line.
View 8 Replies
View Related
Jun 6, 2011
Whenever I place a copy or paste from the clipboard AutoCAD freezes for about 5 -8 seconds and is very annoying. Time is money people. I know it's not a RAM issue. I don't have the problem with 2011 when I go back to it. What gives Autodesk? When is the next service pack due? This only happens with teh copy command
View 9 Replies
View Related
Oct 30, 2013
I have an ipart I'd like to create w/ surfaces. The surface color is important because we use that as plate thickness ID in FEA. When I color a surface blue, then another red I continually get the default color when using the mirror or array command. We're creating a customizeable ipart where there will be some intelligence surrounding how big the array (we may need 3, 4, or 5 beams based on the unit size). I need a way that the colors on the surface propogate to the new surfaces created by the commands.
View 1 Replies
View Related
Dec 19, 2013
I'm trying to set my default for the 'c' copy command to be multiple in AutoCAD 2014. I set 'c' under aliasedit to COPY, but when I use the command 'c' it brings up [Displacement Multiple] as options but no mOde. If I use the command 'co' it brings up [Displacement mOde]. How do I set my 'c' copy command to default to multiple?
View 7 Replies
View Related
Oct 18, 2013
In AutoCAD 2011 in mapclassic mode I removed some buttons that I don't use from the Modify toolbar and now the copy command doesn't work. I can't even type in the command line.
View 1 Replies
View Related
