AutoCAD Civil 3D :: Reverse Unlock In Drawing Command
Nov 28, 2012
When I first created my surface model, any point I moved would snap back to its original position like a rubber band. I had to do some edits so I unlocked this by .... Survey Tab>My survey database>Survey Points>Points, and then picked "Unlock In Drawing". This command unlocked All points in the drawing so I could edit them.
Now that I am done with my edits, how do I reverse this command globally, so as to get ALL points locked again (so they snap back to their original position like a rubber band if moved, like before) ?
View 2 Replies
ADVERTISEMENT
Aug 2, 2012
While working in my topo drawing I used the "reverse" command to flip all my linetypes (water, over head wire, gas) to show correctly. My topo is x referenced into my utility drawing and my x reference lines will not flip. i have reloaded, i have closed and re opened, i have regenerated. No luck...
View 3 Replies
View Related
Aug 16, 2011
Create a command (macro) to unlock all locked layers and remove the fade effect. I know how to unlock them by using the command LAYULK, selecting the entities on the locked layer. I have been trying to automate the command so I don't have to select entities.
View 4 Replies
View Related
Jun 7, 2011
What is the reverse command for CHAMFER (working with 3D solids)?
View 2 Replies
View Related
Jul 8, 2013
Any issues when copying certain object within my drawing from one part of the drawing to another, after selecting the objects I want to copy, I select the destination point and I cannot see any of the objects that I am copying, the command stops working and then I cannot see any objects in my drawing at all....its like I am zoomed out all the way and nothing is in my drawing...I save the drawing as is (seeing nothing on my screen)...calling it up again and all my linework, etc. is there again...it has happened in two different drawings so far within the last few months, and these dwgs. are not linked to each other at all....
View 2 Replies
View Related
Oct 27, 2013
I am having trouble with a locked xref. I would like to unlock it so that I can modify for my mechanical drawing. The architectural drawing is provided in xref form from the architect and he has not left it open.
Is there a simple way I can unlock it so that I can modify it without going back to the arch?
I am currently using 2008.
View 5 Replies
View Related
Oct 17, 2012
I am trying to work a routine that will draw tangents with or without curve in a profile by calling the command in the Toolbar icon to "Draw Tangents" button that is on the Profile Layout Tools toolbar. I can't seem to locate the command that I could execute at the comand line or in LISP. Where can I find a complete list of C3D commands to reference?
View 3 Replies
View Related
Oct 1, 2012
I have quite a large drawing (subdivision) with many bearings annotated.On many of the bearings, I wish to reverse them.
For example, if the text is 6°49' I want it to read 186°49'
Similarly if the text is 355°21' I want it to read 175°21'
Any LISP routine or VBA that will do this?I have one called "180" however it only succeeds in crashing Autocad.
View 9 Replies
View Related
Dec 17, 2012
I have a polyline in my drawing, consisting of arcs and lines all joined together. It is a waterline and I cannot get it to reverse.. it is reading ----M----- instead of -----W-----
View 9 Replies
View Related
Jul 12, 2012
I have made line types with text and need to reverse the direction that the text reads. The text autocorrects based on UCS north. The UCS in the drawing is rotated 90 degrees so line text reads upside down. I type in the reverse command but the text does not change.
View 1 Replies
View Related
Jul 13, 2012
I need to create a profile view that starts at Station 189+00 and ends at Station 175+00 such that the stationing of the profile decends from left to right. How do I do this in Civil 3D 2010?
View 5 Replies
View Related
Mar 27, 2011
is there is any way to reverse the alignment direction
View 3 Replies
View Related
Oct 28, 2013
I need to put a reverse curve on an alignment. I have tried using two free curve fillets,(between two entities, radius). the first curve was fine, but it would not allow the second curve. I also tried using a floating curve ( from entity radius through point) first, but it did not work.
View 2 Replies
View Related
Mar 5, 2013
We have a large pipe project that forms a very large 'C' shape. To follow convention with advancing stations from left to right and north being up, we are running into some problems.
1). For Civil 3D, can you reverse the profile for a section, say station 9+00 to 18+00 only. The remainder would be one direction.
2). What do others use for convention for north arrow direction and advancing stations?
Our first sheet goes from east to west, the second and third sheets run north to south, the next ones are west to east, and the final ones are north to south.
3). What will be the layout/formatting?
View 5 Replies
View Related
Aug 15, 2010
Can I reverse the direction of an existing horizontal alignment line in C3d 2011?
View 9 Replies
View Related
May 8, 2012
where the setting is to reverse the flow of a pipe. I have the flow arrow shown in the wrong direction plus am showing a negative slope on a pipe, which should never be done.
View 9 Replies
View Related
May 9, 2012
handle a PRVC label? Right now I have the PVC and PVT labels on top of each other. Is there a nice solutioon other than making a new label style?
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
View 2 Replies
View Related
Jan 7, 2014
I can't figure out how to reverse the flow direction on my pipe so I was going to just redraw it but after I delete a pipe and rt click to edit network the "add pipes and stuctures" won't let me add anything. I'm just guessing I need to reverse the flow direction because my invert out and invert in elevations are backwards in the profile. I'm working in Civil3D 2012.
View 6 Replies
View Related
Jul 29, 2012
I want to add a single transition curve between two reverse curve in Civil3D.
I am using Civil3d2012.
View 3 Replies
View Related
Jun 14, 2012
I have a special ditch profile that I'd like to use a linetype with arrows on. Currently, it shows the arrows going up station with my mainline profile. i.e. now water does flow uphill...
How can I flip this line?
View 9 Replies
View Related
Mar 12, 2012
I have edited the "GeneralLegalPhrasings.xml" file used for the parcel report "General_Legal_Description_for_Parcels".
Two issues: 1. it will not label a reverse curve properly....it shows them all as "compound curves". 2. A curve to curve is always shown as "NonTangent".
I've attached the .xml file (I only edited the imperial parcels - the second large group of <Metes>).
Quite simply, these two "types" below have the words "reverse curve" and tangent or non-tangent accordingly in the output phrase, but it only creates non-tangent compound reports.
Curve to TangentReverseCurve
Curve to NonTangentReverseCurve
This is the report from the parcel in the attached dwg file (notice the "curve to the left" -> "curve to the right" labelled as compound, and all non-tangent curve to curve):
From the POINT OF BEGINNING; Thence, North 90° 00' 00" West, 129.16 feet to a point for corner;
Thence, North 00° 00' 00" East, 100.00 feet to a point for corner, the beginning of a curve; tangent
Thence, 61.46 feet along the arc of a ____ curve to the right, having a radius of 39.13 feet, a central angle of 90° 00' 00", and a chord which bears North 45° 00' 00" East, 55.34 feet, to a point for corner, the beginning of a compound curve; non-tangent
Thence, 47.09 feet along the arc of a ____ curve to the left, having a radius of 29.98 feet, a central angle of 90° 00' 00", and a chord which bears North 45° 00' 00" East, 42.40 feet, to a point for corner, the beginning of a compound curve; non-tangent
Thence, 94.33 feet along the arc of a ____ curve to the right, having a radius of 30.03 feet, a central angle of 180° 00' 00", and a chord which bears North 90° 00' 00" East, 60.05 feet, to a point for corner;
Thence South 00° 00' 00" West, 169.11 feet to the POINT OF BEGINNING and containing 0.483 acres of land.
Civil 3D 2011
Windows 7 x64
View 3 Replies
View Related
Sep 8, 2012
How to generate reverse curve details from the alignment
i.e. i want to generate
delta
length of reverse curve
transition length
deflection angle (delta) of transition curve
shift
etc ........
i want them to generate in the plan.
View 2 Replies
View Related
Aug 5, 2013
how to create reverse curve with straight portion in between , as their is no option of creating reverse curve with straight portion in civil 3d , duding designing a hill road what ever the reverse curve you design will be wrong and superelevation generated will also be wrong as it do no include straight in between the curves (ie reverse curve should contain transition curve transition straight transition curve transition.)
View 5 Replies
View Related
Jun 10, 2012
Can you reverse the direction of an auto feature line generated from a corridor in C3D 2012?
View 4 Replies
View Related
Nov 19, 2013
I copied some Survey Data of AutoCAD Civil 3D 2013 for Surveyors to my C3D 2013 machine few weeks ago. Now I cannot do the "Import point file" of the Survey2 Data B in Survey Databases, because the Survey2 Data B is locked up - see the attached file that has a red circle with an arrow on. How I can unlocked the locked Survey 2 Data in the Survey Databases.
View 1 Replies
View Related
Jan 2, 2014
I have cut several sections at different points along a road alignment. The sections are cut facing the same direction as the alignmnet. Is there a way to reverse the section direction without changing the alignment direction?
View 6 Replies
View Related
Oct 9, 2012
I'm trying to use the hatch command on a drawing. Everything seems to work fine, but when I hit enter after having used the hatch command, selected pick points etc. nothing happens on the drawing. There are no error messages.
I can use hatch without problems on other drawings so I suspect it has something to do with the drawing or I've overlooked a setting or two.
View 9 Replies
View Related
Feb 12, 2013
The case is I want move like a object like a screw out or in in the some assembly so to fit the place where it should go , I hope the screw could be an whole object instead of multible lines. The benefit is just to make the modification easier.
View 4 Replies
View Related
Oct 22, 2012
I have a drawing that was drawn in 3D CAD and I need to convert to 2D CAD. I changed the view, but I cannot remember what the command is I need to type in to change to 2D.
View 3 Replies
View Related
Aug 26, 2012
I've finished drawing my ground floor and now I need to draw my second floor. I read in a tutorial that the best way to do this is using the Xref command to know where is the walls, bathrooms and etc.
But I didn't get it at all. I need to draw my second floor in the same drawing. So what's the easiest way to do that?
After that I need to have a drawing with my second floor walls in dashed thin lines over my first floor. How can it be done?
View 5 Replies
View Related
Feb 1, 2013
What is the command to create an X-Ref from my drawing?
View 9 Replies
View Related
