I have quite a large drawing (subdivision) with many bearings annotated.On many of the bearings, I wish to reverse them.
For example, if the text is 6°49' I want it to read 186°49'
Similarly if the text is 355°21' I want it to read 175°21'
Any LISP routine or VBA that will do this?I have one called "180" however it only succeeds in crashing Autocad.
I need to get the layout list in reverse order. How to do this? My plotter outputs prints face up and I wind up with a stack of drawings in reverse order - If I can cycle through the tabs in reverse order they will wind up in the correct order in the print room!
View 9 Replies View RelatedAny lisp routine out there to append (prefix) text to dtext?
i have 100s of dtext that has numbers in them, and i need to place the "#" symbol in front of them now.
Normally when applying the matchprop command in CAD, one has to first pick the template element, and then select the elements which should have this template element's properties copied to/matched.
is it possible (via lisp perhaps?) to reverse this order, so that i can select a bunch of elements (e.g. through the quickselect icon) and THEN apply a matchpropertieslisp command, then select a single template element which the initially selected elements should mimic?
is it possible to make a LISP program whcih write down my layer name and description as text or Mtext in the drawing, so it will look like:
A_Wall architecture wall
A_Column architecture column
something like that.Each text, which is written in the drawing should have the same layer like the layer name.
the closest i can get is this code below, which write the layer as text, but what missing is: i want to add the description behind the layer name:
(defun c:layerlegend (/ osm ortho clayer celtype cecolor start-point line-length text-height *error*)
(defun *error* (msg)
(setvar "osmode" osm)
(setvar "orthomode" ortho)
(setvar "clayer" clayer)
(setvar "celtype" celtype)
(setvar "cecolor" cecolor)
(princ msg)
)
[code]...
I am writing a LISP program to generate development of surfaces. Once the entire drawing is completed, I want that the input data to be displayed on drawing window as text.
View 2 Replies View RelatedI have this lisp that grabs all the text(the value and the location) in my drawings and I put them into a list. Here is what I have so far:
(defun c:loop ()
(setq numbers (ssget "_X" (list (cons 0 "TEXT") (cons 1 "##*")) ))
(setq newlist '())
(setq IN 0);set index
(setq SLGTH (sslength numbers))
[code].......
What i need to happen is this: When "whatever" returns "value0" i need to set "value0" to the first item in list "newlist". Then when "whatever" returns "value1" i need to set "value1" to the second item. Now I can do it the long hand way, but i am trying to simplify this step, and shorten up my overall program.
I am able to insert multi line text into the Drawing Properties Summaryinfo standard field "comments" by using string concatenation in VBA by using "mytext" & vbLF & vbCR "mytext".
But I can't find a way that works in autolisp. This code does not work.
(defun c:FillComments (/) (vl-load-com) (setq acadObj (vlax-get-acad-object)) (setq acDoc (vlax-get-property acadObj 'ActiveDocument)) (setq acDocSumInfo (vlax-get-property acDoc 'SummaryInfo)) (setq *customer* "MyCustomerName") (setq *location* "MyLocation") (setq *project* "MyProject") (setq*comments* (strcat *customer* ", " (chr 10) (chr 13) *location* ", " (chr 10) (chr 13) *project* ) ;_ end of strcat ) ;_ end of setq (vlax-put-property acDocSumInfo "Comments" *comments*) (princ)) ;_ end of defun
The text comes in but all on one line.
I am trying to put together a lisp routine for exporting a Civil3D drawing to basic autocad entities and convert it to a clients layer standards.
I don't want any user input, so I see two problems with the routine at the moment.
Step 2. SAVEAS - I want the drawing to be saved in the same directory as the current drawing, either called "CLIENT_export.dwg" or preferably "Export_{current drawing name}.dwg". If the dwg exists I want it either to overwrite or increment a suffix number.
Step 4. At the moment it askes the user for a selection, I want it to select "ALL"
;;;Purpose to convert a Civil3D drawing into CLIENT layer standards.
(defun c:client ()
(setq old-echo (getvar "CMDECHO"))
(setvar "cmdecho" 1)
[Code]...
I don't have any experience with LISP or any other programming. I have just been cobbling this together from bits and pieces I have found on the web.
I want to insert another drawing layout tabs contents in current drawing.
It's easy for MODEL tab, but for LAYOUT tabs, I dont know how!?
I prepared a code for INSERTING MODEL tab in current drawing:
(defun INS_DWG (TAB path dwg P / blk)(setq blk (strcat ""*" path dwg """));(setq N (vla-get-count (vla-get-layouts)));;Number of LAYOUT TABS in dwg(if (or(= TAB 0) (= TAB nil))(command "INSERT" blk P 1 0)); TAB=0 or omitted ==>Insert MODEL;(if (= TAB 1));==>Insert the 1st LAYOUT in dwg file;(if (= TAB 2));==>Insert the 2nd LAYOUT in dwg file;and so on....);;;usage:;;(INS_DWG 0 "c:\test\" "test.dwg" '(0 0))
how to delete all OLE objects from drawing by most efficient way.
There are abt 150 drawings, each has from 2 to 20 or so OLE objects which need to be deleted. OLE objects are on many paper spaces.
I tried to use qselect but it selects only what is in current space.
Would need some lisp or some other methode than all can be deleted (excluding those which resides in blocks).
Tried also yto use ssx and then erase but still it deletes only what is on current space.
Just as additional info, those OLE are all pictures, not xls files for example.
How can you open a drawing read-only with autolisp.
View 9 Replies View RelatedI am trying to insert one or another block into a drawing, and i need to do this 8 times per drawing.
(defun C:detector (/ filename gas pressure)
(repeat 8 (initget 1 "Gas Pressure")
(setq filename (getkword "
Enter Detector Type [Gas/Pressure]: "))
(if (= filename "gas") (command "-insert" "*T:\acad\schematic_circuits\suny\sunygasdetectornew.dwg" pause "" "")
(or (if (= filename "pressure")
(command "-insert" "*T:\acad\schematic_circuits\suny\sunypressuretransmitternew.dwg" pause "" ""))
) ;;end or
) ;;end if
) ;;end repeat
)
I am working on a lisp that automaticaly draws some tubes and fittings.First the user has to select the block where the tubes start and then he selects where the tubes has to end.Herefor i whrote this lisp..
(defun c:test () ;;------------=={ Set Dynamic Property Value }==--------------;;;;;;;; Modifies the value of a Dynamic Block Property ;;;;-------;;;; Author: Lee Mac, Copyright © 2010 - www.lee-mac.com ;;;;---------------------;;;; Arguments: ;;;; block - VLA Dynamic Block Reference Object ;;;; prop - Dynamic Block Property Name ;;;; value - New value for Property ;;;;------------------;;;; Returns: Value property was set to, else nil ;;;;-------------------;;(defun LM:SetDynamicPropValue ( block prop value ) (setq prop (strcase prop)) (vl-some (function (lambda
[code]....
Is it posible to show the user how the tubes gow befor chozing the second point?(A litle bit like when you stretch a dynamic block where you can see how the object will look like while preforming the stretch action).
As you smart individuals can figure out, we do up drawing packages for construction that consist of several drawings, hundreds of drawings, for several modules of construction. Our process usually consists of one layout per drawing, so that the lisp guy can do a drawing count and put in sheet numbers based on how I manipulate the list of drawings in the one directory folder.
Now I have a client, despite the way we currently do things, requires that about 70% of the drawings will have multiple layouts. Now we're back in the stone ages, manually putting in sheet numbers, eating up our budget for this contract.
how to use AutoLISP to draw lines between two points. I have x,y,z coordinates for the end points in an excel sheet which I can save as a text file. I need to pull the coordinates from the file and use them to draw the lines. There are 2000+ lines so it is not feasible to draw them manually.
View 8 Replies View RelatedI have the following string of code, that I'll write in everyone's start-up suite. I'm able to retrieve a list of files I want to modify, for whatever reason. (One example, when plotting drawings with layouts, sometimes the shadeplot setting is wireframe, and not classic hidden, though it's been set up in our templates).
The huge question is, can I get a list of drawings to a variable in one drawing, and have access to that variable list, in the next drawing I open? I'll iron out the bugs on read-only statuses, or manipulating drawing states later.
(defun GetDrawings ()
(setq currentpath (getvar "dwgprefix"))
(command "pspace")
(setq DrawingList (dos_getfilem "Select a file" currentpath "Drawing files (*.dwg)|*.dwg|All files (*.*)|*.*||"))
(setq ListOfDrawings (cdr DrawingList))
(setq DrawingPath (nth 0 DrawingList))
[code]...
I know through the block command you can write out a selection of entities to a single drawing.But what I am wondering is if it is possible to have two drawings open, and transfer data quickly between the two?
As an example as we are detailing an assembly we create a title block around a detail, put dimensions and notes on as needed and would then like that to be transfered into another drawing next to the previously transfered detail drawing.
I'd like to create a lisp that would check my drawings for stray vertices (I only draw in full measurements per UCS), and automatically round them up to the closest whole value, or at least mark them up in circles for manually fixing them.
View 1 Replies View RelatedI need lisp that draws rectangle between two lines by window selection. As attached.
View 3 Replies View Relatedcan you start autocad with no drawing open ?
i would think that some type of script would work or could you change your target on a shortcut?
Is there a way of opening existing cmds in the visual lisp editor and edit them to do something else? I'd like to set up a lisp where 'uu' would switch the drawing units from decimal to architectural units and hittng 'uu' again would switch it back.
View 4 Replies View RelatedI want to draw a line which shows a particular color scheme, I at current do this by drawing a solid line of one color and then use a dashed line of another color top go over it.
The obvious problem is that these lines are being double drawn. Is there a way using lisp that I can draw both lines at once?
I am attempting to create an AutoLISP that removes all un-used drawing scales from a file, then adds the standard scales used in civil engineering. This is what I tried using:
;;;Add Engineering Scales
(defun C:AES ()
(command ".CANNOSCALE"
"1" = 1'"
(command "-scalelistedit"
[code]...
Now, I am only a beginner to writing LISP, but I know that my problem is that it is reading the inch marks after the one in the scale name as a enter, but I don't know how to get around this. Also, I don't know how to get it to skip scales that are still in the drawing.
i have one big pipeline drawing and need to "split" it into smaller drawings..there are layers, v500, v250, v100 that represent size of pipeline.i'd like to extract all elements from layer v500 to drawing v500.dwg, after that v250... etc.
problem is that i would select only elements from v500, erase all other and than save it as v500.dwg... and then what? undo all and repeat everything with another layer?
is there a way to copy elements to another drawing and save and then return to original drawing and execute another set of commands?
There are two lines in attached drawing. It seems FLATTEN doesn't work on them. How can I flatten them with lisp code?
View 9 Replies View RelatedI recently upgrading to ACA 2014. I have set my trusted locations, my file path, the startup suite, and the system variable to load acad.lisp on startup. Most of my lisp routines load, but not all. I still have my ACA 2011 loaded, all settings are applied as required, yet I do not have the same issue with the same lisp routines. I have to reload my lisp routines for every drawing.
View 7 Replies View RelatedHow to create macros of a drawing and then hw can we change the drawing by editing the macro. E.g.. I have drawn a circle of 30 mm dia.. than need to crate macros for same and then by changing the dia of circle in macros I want to create new circle of 50 mm dia.
Another thing I wanted to ask is what is difference between visual lisp and visual basic. Which is easier??
I have to create some plines in a drawing from the inputs provided by the client. I prepared a lisp code for it. I have to use it to 1000 drawings. Every time I open the drawing and running the lisp command.
Is any lisp code to run in bulk open drawings with out entering command prompt.
I have two attributes "REVN" and "REVD" in a block "ATT" that I would like to change (globally preferably) to the following.
(1) Existing text to keyboard entry text.
(2) Colour from existing to 10
I am a bit lost in the (command "-attdef" .......)
(defun c:atc ()
(setq rev (getstring "Please enter review"))
(setq dat (getstring "please enter date"))
(command "-attdef" .."ATT".."REVN"....."c" "10")..)
(command "-attdef" .."ATT".."REVD"....."c" "10")..)
)
I have some code that starts a new drawing with a specific template from a lisp routine
(defun ghd:load_newdwg (template / ae-acad-object newdwg)
(setq ae-acad-object (vlax-get-acad-object))
(setq newdwg (vla-add (vla-get-documents ae-acad-object) template))
(vla-put-activedocument ae-acad-object newdwg)
)
The template location and file is stored in variable clienttemplate (and is not the standard template path set under options). All works okay except if I close the new drawing, when I return to the previous drawing that was current when the new drawing was created (i.e. the drawing that the routine was run from). I get the following error:
Command: ; error: Exception occurred: 0xC0000005 (Access Violation)
; error: Unknown exception occurred
; warning: unwind skipped on unknown exception
I assume this has something to do with the original routine not closing/finishing before switching to the new drawing. This is the last line of the routine:
(cond ((= startnewdwg 1) (ghd:load_newdwg clienttemplate)))