AutoCAD Visual LISP / AutoLISP :: Match Properties In Reverse Pick Order
Aug 17, 2011
Normally when applying the matchprop command in CAD, one has to first pick the template element, and then select the elements which should have this template element's properties copied to/matched.
is it possible (via lisp perhaps?) to reverse this order, so that i can select a bunch of elements (e.g. through the quickselect icon) and THEN apply a matchpropertieslisp command, then select a single template element which the initially selected elements should mimic?
View 4 Replies
ADVERTISEMENT
Jun 7, 2013
I need to get the layout list in reverse order. How to do this? My plotter outputs prints face up and I wind up with a stack of drawings in reverse order - If I can cycle through the tabs in reverse order they will wind up in the correct order in the print room!
View 9 Replies
View Related
Aug 25, 2005
Is there a tool out there that will allow me to pick an object and change it's layer properties?
View 9 Replies
View Related
Dec 30, 2013
I've been looking for commant that will allow me to copy a selection of entities to another layer for details. I'll need to be able to select several objets all at once and have each of them maintain the correct colors, linetypes, lineweights. Most everything is set as bylayer but that makes everything change once the objects are moved to a new layer.
How can I keep the everything looking like it never changed except for the fact that it will be moved to a new layer - layer 0 in this situation?
View 9 Replies
View Related
Aug 8, 2013
I know how to increment pick points numerically (see below). How is it done alphabetically?
(defun C:test (/ pt# pt) (setq pt# (getint "
Enter number: ")) (while (setq pt (getpoint "
Specify point: " ))(if (/= pt nil) (progn (command "TEXT" "M" pt "" "" pt#) (setq pt# (1+ pt#)) ) ) ) (princ))
View 3 Replies
View Related
Jan 31, 2013
I'm wondering if there is a lisp possible to measure area's by pick point (as in bpoly). This little feature exists in Microstation so i was looking for something similar.
Is it also possible if this lisp can measure areas from an external reference (dwg, dxf, dgn, shp etc..)? I'm kind of new to AutoCAD in that sence.
View 2 Replies
View Related
Jul 30, 2013
I used to have a lisp routine that would allow me to pick one dynamic block and it would select all instances including the blocks that have become anonymous.
View 5 Replies
View Related
Nov 18, 2013
I like that Autodesk now allows us to just pick a command's option from the command line instead of typing a letter in the option. For example, when drawing a rectangle we're prompted to "Specify first corner point or [Chamfer Elecation Fillet Thickness Width]" and if we wanted to draw fillets on the rectangle we can simply PICK that option from the prompt in the command line OR enter an "F" and return.
Is there a way we can use this functionality in our custom programs?
View 9 Replies
View Related
Oct 1, 2012
I have quite a large drawing (subdivision) with many bearings annotated.On many of the bearings, I wish to reverse them.
For example, if the text is 6°49' I want it to read 186°49'
Similarly if the text is 355°21' I want it to read 175°21'
Any LISP routine or VBA that will do this?I have one called "180" however it only succeeds in crashing Autocad.
View 9 Replies
View Related
May 8, 2013
I have a lisp routine that I would like to add to. Right now when running the macro the user is not prompted to "Pick Point On Line" in this example
(command "insert" blk "s" var1 pause pause))
I have added the line
(setq pt1 (entsel "Pick Point On Line "))
(command "insert" blk pt1 "s" var1 pause pause))
but the command doesn't seem to like my PT1 value
BLK and VAR1 are set in another lisp routine.
View 9 Replies
View Related
Nov 6, 2013
I am looking for some code that would allow me to select a MTEXT Entity - or other entity - (as the DEFAULT option) but also to allow me to type in some text manually or to pick a point in the drawing. Something that would present the user with:
"Select an object or [P to pick a point]" or
"Select MTEXT or [M to type].
I can write some code to type in text manually as the default option and get the second option to select entity using get string and then write some condition of if code but I don't know how to do it having entsel as default option.
View 3 Replies
View Related
Apr 26, 2013
Create a script or a lisp file to match a tif to a drawing file in autocad 2011?
View 9 Replies
View Related
Jan 18, 2012
The crux of the matter is that the CANNOSCALE value needs to match an existing named scale. This lisp is part of a bigger lisp and I need to pass a variable into it. Here's what I have:
(setvar "CANNOSCALE" (strcat "1" = " (rtos variable 2 0) "'"))
But I get this error when I try to run it.
; error: bad argument type: numberp: nil
View 3 Replies
View Related
Aug 2, 2012
Trying to get the files I use which are single-layout tab files to name the layout tab to match the file name, minus the .DWG extension.
Here is what I am trying to use, but it doesn't seem to be working.
(DEFUN C:RRT (/ name)
(setq name (getvar (vl-filename-base (getvar "dwgname"))))
(command "-layout" "rename" name "")
(princ)
)
View 9 Replies
View Related
Aug 5, 2013
I would like to select all instances of a block, and put a new block on top of them using the same properties (insertion, rotation) but am unsure how to do this
View 3 Replies
View Related
Oct 7, 2011
There are a ton of lisp to match text rotation to a selected line, but not vice versa.
View 9 Replies
View Related
Aug 6, 2008
I am in need of a lisp routine which will automatically pick up all hatch and solid hatch patterns within a drawing and change the colour to colour 254.
View 9 Replies
View Related
Sep 4, 2011
Any routine that will allow to draw a polyline through existing blocks, in the order the blocks should be numbered? Therefore when the sequence has been specified by the polyline then user to define the number system required, and the blocks are automatically numbered in the sequence of the polyine start to finish.
View 9 Replies
View Related
Apr 23, 2013
I required a lisp for sorting Multiline text in alphabetic order. (Ascending and Descending)
For example in my drawing it contains lot of Mtexts having multi rows. I need to sort texts inside Mtext. Like PDC-012, DAG-012, AAG-096. I need that Mtext should be AAG-096,DAG-012,PDC-012.
View 9 Replies
View Related
Mar 5, 2010
I am looking for code that will delete all the properties within a DWG file.
Searching the forum, I found the following
; Remove any existing Properties
(dictremove (namedobjdict) "DWGPROPS")
However, further research (forum, testing and help system) indicates that it no longer applies to current releases of AutoCAD so my initial happiness was short-lived!
View 6 Replies
View Related
May 28, 2013
I have used Autocad since 1991, and my current job required me to use Microstation. One feature I liked from Microstaiton is the ability to select and open an external DGN reference, and then match the view of the parent DGN. In AutoCAD, you can also select and open an xref, but the DWG opens to the previous saved view, and not to the desired view that matches the layout.
My thought was to experienting with lisp or scipt and export the "Viewctr", "Viewtwist" and "Viewsize" variables to a text file, then importing the text file and using the "Viewtwist" as my "SNAPANG" value, then "Viewctr" as my "ZOOM, CENTER" value, and finally the "Viewsize" as the "Enter magnification or height:" value.
But, alas, have no time, and not quite the knowledge to duplicate MicroStation's open-xref-and-zoom-to-view feature.
View 6 Replies
View Related
May 17, 2012
I have a routine that looks for an MText date stamp and replace the old date with a new date. The problem is some MText strings appear encrypted. Below is an example:
{\H1.121x;\C1; \LFY 2011-12\l \H0.6252x;04-30-11} This is what I should get when I extract the string (as shown in Property window)
(1 . "\pxi-2.1818,l4.3636,ql,t4.3636;{\fSymbol|b1|i0|c2") is what I get when I extract the group code.
I'm running AutoCAD 2012 on Windows 7.
View 2 Replies
View Related
Nov 23, 2012
I need a program to move some selected text to a line something like as extend command but for text objects!
suppose that there is a horizental line (y=constant) or vertical line (x=constant) and some selected text(or other objects), I want a lisp program that move these selected text (or objects) by their "insertion point" to this line.
in other word, if the selected base line is horizental (y=constant) then property of "Y" of all selected text should change to line's "Y"; and if selected base line is vertical (x=constant) then value of "X" of all selected text should match to line's "X" value.
for example, for base vertical line (x=constant) and 3 selected text(or can be any object) result is:
text1. | text1.|
text2. | ===> text2.|
text3. | text3.|
| .text1 |.text1
| .text2 ===> |.text2
| .text3 |.text3
View 9 Replies
View Related
Nov 6, 2012
Any lisp routine on how to change "Drawing Properties" (fields via Mtext) on multiple single drawing files?
There are several instances where we would need to take a project to create another one and simply change the title block description.
As of now, we are opening each drawing (there could be hundreds) and modifiying the drawing properties on each drawing to change the customer name and other project descriptions.
These are not attributes, but fields. I've researched alot on here and couldnt find anything.
The drawing is attached.
View 3 Replies
View Related
Oct 1, 2012
how to access custom drawing properties using LISP. It was in a discussion initiated on 01-06-2011, subject: Custom drawing properties.
One solution was to use the following method:
(setq si (vla-Get-SummaryInfo (vla-Get-ActiveDocument (vlax-Get-Acad-Object))))
(vla-GetCustomByKey si "DWGPROP1" 'pval)
(princ pval)
Now taking it a step further, using LISP, how can I "update" my custom drawing properties?
Inventor RS 2011
AutoCAD Mechanical 2011
ASD 2013
Vault Collaboration 2011
Windows 7 Pro
View 2 Replies
View Related
Oct 23, 2013
I'm trying create a LISP to customize PDF creation. The lisp looks into the .PC3 file which paper size better fits the plot area. But its exaustive to every time i want to create a new paper size i have to open the .pc3 file and configure a new paper.
There is a way to open the .pc3 properties through lisp?
View 9 Replies
View Related
Jan 26, 2012
I'm looking for a lisp routine that i can globally change the text height and width factor of a particular block attribute. The name of the attribute tag is "TAG". I would like to be able to select all the blocks that i need to edit and then specify what text height and width factor i want to change to.
View 9 Replies
View Related
Dec 27, 2013
I have a CAD file with a couple hundred detail blocks in it, and I am trying to standardize them without haing to block edit each detail block.
What i am trying to do in each block is as follows:
- Explode all dimensions, leaders, and blocks
- Change all objects to layer "0"
- Change all lineweights to default
- Change all object on colors 7 and bylayer to byblock
- Change all text and mtext to arial font
- Delete all points
Civil 3D x64 2012
Win 7 x64 Ultimate
I7 3820 (3.6ghz quad core with HT)
32gig RAM (Corsair XMS3 4x8g)
Intel x z79 mobo (BOXDX79TO 2011 socket)
Radeon HD 7850 2gb GDDR5
View 3 Replies
View Related
Nov 4, 2013
I am trying to customize my quick properties (acad.cuix), but i keep on receiving fatal error message. And when i click on quick properties it is all blank. Also, the Properties dialogue box is not working when i click on something, the properties do not appear on the Properties dialogue box. Attached is the error message.
View 3 Replies
View Related
Apr 9, 2012
Looking for Lisp command to show (read/assign variables) to normal or custom properties in an object?
View 7 Replies
View Related
Apr 23, 2013
How can I get/edit the properties (height,..) of a drawing view created with 'viewsection' command?
View 2 Replies
View Related
