AutoCAD Civil 3D :: Reverse Alignment Direction

Aug 15, 2010

Can I reverse the direction of an existing horizontal alignment line in C3d 2011?

View 9 Replies


ADVERTISEMENT

AutoCAD Civil 3D :: Reverse Section Direction Without Changing Alignment Direction?

Jan 2, 2014

I have cut several sections at different points along a road alignment.  The sections are cut facing the same direction as the alignmnet.  Is there a way to reverse the section direction without changing the alignment direction?

View 6 Replies View Related

AutoCAD Civil 3D :: Reverse Alignment Direction?

Mar 27, 2011

is there is any way to reverse the alignment direction

View 3 Replies View Related

AutoCAD Civil 3D :: Changing Alignment Direction Where Feature Line And Alignment Coincide?

May 28, 2012

i've made a serpantine curve that starts from one line of alignment and end on the other line.

i wanted to know how can c change alignment direction when these two feature line and alignment meet each other in order to change the alignment path?

View 3 Replies View Related

AutoCAD Civil 3D :: How To Reverse Line Direction

Jul 12, 2012

I have made  line types with text and need to reverse the direction that the text reads.  The text autocorrects based on UCS north.  The UCS in the drawing is rotated 90 degrees so line text reads upside down.  I type in the reverse command but the text does not change.

View 1 Replies View Related

AutoCAD Civil 3D :: How To Reverse Flow Direction On Pipe

Jan 7, 2014

I can't figure out how to reverse the flow direction on my pipe so I was going to just redraw it but after I delete a pipe and rt click to edit network the "add pipes and stuctures" won't let me add anything. I'm just guessing I need to reverse the flow direction because my invert out and invert in elevations are backwards in the profile. I'm working in Civil3D 2012.

View 6 Replies View Related

AutoCAD Civil 3D :: Flip / Reverse Line Direction In Profile?

Jun 14, 2012

I have a special ditch profile that I'd like to use a linetype with arrows on.  Currently, it shows the arrows going up station with my mainline profile.  i.e. now water does flow uphill...

How can I flip this line?

View 9 Replies View Related

AutoCAD Civil 3D :: Reverse Direction Of Auto Feature Line Generated From Corridor In 2012?

Jun 10, 2012

Can you reverse the direction of an auto feature line generated from a corridor in C3D 2012?

View 4 Replies View Related

AutoCAD Civil 3D :: How To Generate Reverse Curve Details From Alignment

Sep 8, 2012

How to generate reverse curve details from the alignment

i.e. i want to generate

delta 
length of reverse curve
transition length
deflection angle (delta) of transition curve
shift
etc ........

i want them to generate in the plan.

View 2 Replies View Related

AutoCAD Civil 3D :: How To Change Alignment Direction

May 10, 2012

Changing alignment path in my drawing,how can i do that? There is a pic too.

View 1 Replies View Related

AutoCAD Civil 3D :: Changing Line Direction In Alignment?

May 10, 2012

i have problem in changing line directions that i'm using in my alignment.like buttom figure.

View 6 Replies View Related

AutoCAD Civil 3D :: Provo GeoSurveying - Direction Of Alignment?

Nov 6, 2013

I imported 5182 points (in the NEZ format) into my AutoCAD Civil 3D 2013 (English Metric) and then created a Surface from these points (Style: Contours 1m and 5m (Background)). I selected a polyline => Alignment => Create Alignment from Objects - see the attached file.  How can I verify the direction of the alignment I just created? 

View 2 Replies View Related

Photoshop :: How To Reverse Trap Direction

Feb 12, 2013

How do I reverse Photoshop Trap direction (or control it) (CMYK image - trap black to rest of image - swell it)

View 1 Replies View Related

Illustrator :: Reverse The Direction That Type Takes On Path?

Jun 4, 2013

I need to change the direction of type on a path. Basically it is writing the sentence backwards right now. I need it to type right to left instead of left to right so the first word of the sentence will be all the way left instead of all the way right.

View 8 Replies View Related

AutoCAD Civil 3D :: Data Reference Alignment Stationing Differs From Original Alignment

May 3, 2012

I using a data reference/shortcut to properly label an alignment in paperspace. However when I reference the alignment in and apply the labels the aren't the same as the original alignment that I am referencing. Is there a setting where I am supposed to apply a new beginning station.

Also it seems as though the stationing(distance) isn't even matching up 1:1 with the original drawing. For example in the original base drawing my alignment starts at 10+00 with the next PI at 14+76.98, but the stationing on the reference alignment starts at 0+83.33 with the very same PI being labeled as 1+23.08. So the very same distance is 476.98' in the real design and the drawing it's being referenced in, but the stationing of the referenced alignment shows it as 39.75 Units.

I've attached a screen of the beginning of the alignment.

Civil 3D 2012
Windows 7 Service Pack 1
Intel Core i7-2600 CPU
16GB RAM

View 5 Replies View Related

AutoCAD Civil 3D :: Change Alignment Label Style Set After Alignment Has Been Created?

Jul 18, 2013

Using Civil 3d2012, Is it possible to change the alignment label style set after the alignment has been created?  For example, for an alignment that was created with alignment label set X - change the label set to alignment label set Y?  It seems like this should be pretty easy, I must be missing something obvious. 

View 2 Replies View Related

AutoCAD Civil 3D :: Alignment Style Vs Alignment Labels - PI Treated Differently?

Apr 6, 2013

I have a question on Alignment PI's. (Point of Inflection/Intersection)I have an alignment where some PI's have curves, others are merely hard bends.

Is there a way to automatically label the PI's even if they have an associated curve? (I'd like PI, PC and PT)Alternatively, can I only show markers at PI's without curves?

View 9 Replies View Related

AutoCAD Civil 3D :: Alignment Entities Not Showing Up In Alignment Grid View

May 20, 2013

I'm trying to edit some existing alignments. When I create new entities, they do not show up in the alignment grid view. Why is this?

Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3

View 5 Replies View Related

AutoCAD Civil 3D :: Launching Alignment Grid View / Alignment Entities

Aug 11, 2013

Launching alignment grid view/alignment entities,

I’m wondering if there is a way to launch alignment grid view/alignment entities (attached) without the need to first launching “alignment”? This dialogue box is quite essential in editing the values of radius, degree of curvature and deflection angle for the selected curve.

View 2 Replies View Related

AutoCAD Civil 3D :: Alignment Begin Station Inherited From Another Alignment

Aug 8, 2012

Can I inherit the station from one alignment as the begin station for another alignment?

For example. Alignment 1 is 1000 ft long and starts at sta 0+00.

At sta 8+01, Alignment 2 begins and goes off in another direction.

I manually enter 8+01 for begin station Alignment 2. Life is good. Still in the design stage, and customer needs to modify Alignment 1 to avoid something. Now Alignment 2 intersects Alignment 1 at sta 8+15, but same N/E coordinates.

I manually enter 8+15 for begin station Alignment 2.

It would be better if Alignment 2 could inherit the begin station based on the new stationing from Alignment 1.

View 7 Replies View Related

AutoCAD Civil 3D :: Reverse A Linetype

Dec 17, 2012

I have a polyline in my drawing, consisting of arcs and lines all joined together. It is a waterline and I cannot get it to reverse.. it is reading ----M----- instead of -----W-----

View 9 Replies View Related

AutoCAD Civil 3D :: How To Reverse Profile Stationing

Jul 13, 2012

I need to create a profile view that starts at Station 189+00 and ends at Station 175+00 such that the stationing of the profile decends from left to right. How do I do this in Civil 3D 2010?

View 5 Replies View Related

AutoCAD Civil 3D :: Reverse Curve On Alignments

Oct 28, 2013

I need to put a reverse curve on an alignment.  I have tried using two free curve fillets,(between two entities, radius). the first curve was fine, but it would not allow the second curve.  I also tried using a floating curve ( from entity radius through point) first, but it did not work.

View 2 Replies View Related

AutoCAD Civil 3D :: Reverse Profile For Segment

Mar 5, 2013

We have a large pipe project that forms a very large 'C' shape.  To follow convention with advancing stations from left to right and north being up, we are running into some problems.

1). For Civil 3D, can you reverse the profile for a section, say station 9+00 to 18+00 only.  The remainder would be one direction.

2). What do others use for convention for north arrow direction and advancing stations?

Our first sheet goes from east to west, the second and third sheets run north to south, the next ones are west to east, and the final ones are north to south.

3).  What will be the layout/formatting?

View 5 Replies View Related

AutoCAD Civil 3D :: Settings To Reverse The Flow Of A Pipe

May 8, 2012

where the setting is to reverse the flow of a pipe.  I have the flow arrow shown in the wrong direction plus am showing a negative slope on a pipe, which should never be done. 

View 9 Replies View Related

AutoCAD Civil 3D :: Reverse Unlock In Drawing Command

Nov 28, 2012

When I first created my surface model, any point I moved would snap back to its original position like a rubber band.  I had to do some edits so I unlocked this by .... Survey Tab>My survey database>Survey Points>Points,  and then picked "Unlock In Drawing".  This command unlocked All points in the drawing so I could edit them. 

 Now that I am done with my edits, how do I reverse this command globally, so as to get  ALL points locked again (so they snap back to their original position like a rubber band if moved, like before) ?

View 2 Replies View Related

AutoCAD Civil 3D :: Reverse Vertical Curve Label?

May 9, 2012

handle a PRVC label? Right now I have the PVC and PVT labels on top of each other. Is there a nice solutioon other than making a new label style?

Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0

View 2 Replies View Related

AutoCAD Civil 3D :: Single Transition Between Two Reverse Curve

Jul 29, 2012

I want to add a single transition curve between two reverse curve in Civil3D.

I am using Civil3d2012.

View 3 Replies View Related

AutoCad :: Text Suddenly Changes Direction And Reads In Opposite Direction When Line Bends

May 17, 2013

I have created a linetype with the text GAS OPTION in it. The line is continuous with a break around the text. In a straight line the linetype works fine (breaks around the text etc). However, when I use a polyline and spline the line for a curved line the text aligns with the direction of the line at the start, but when the line bends, the text suddenly changes direction and reads in the opposite direction. It looks like AutoCAD is trying to keep the text upright rather than following the direction of the line. When the text changes direction it also changes its insertion point and overlaps the continuous part of the line. I have 2013 AutoCAD.

Here is the string I used for the linetype.

*GAS_Option_LINE,Gas line ----GAS OPTION----GAS OPTION----GAS OPTION----
A,8,-15,["GAS OPTION",STANDARD,S=2.54,U=0.0,X=-2.35,Y=-1.27],-12

View 2 Replies View Related

AutoCAD Civil 3D :: Parcel Reports To Show (reverse Curve)?

Mar 12, 2012

I have edited the "GeneralLegalPhrasings.xml" file used for the parcel report "General_Legal_Description_for_Parcels".

Two issues:  1. it will not label a reverse curve properly....it shows them all as "compound curves". 2.  A curve to curve is always shown as "NonTangent".

I've attached the .xml file (I only edited the imperial parcels - the second large group of <Metes>).

Quite simply, these two "types" below have the words "reverse curve" and tangent or non-tangent accordingly in the output phrase, but it only creates non-tangent compound reports.

Curve to TangentReverseCurve

Curve to NonTangentReverseCurve

This is the report from the parcel in the attached dwg file (notice the "curve to the left" -> "curve to the right" labelled as compound, and all non-tangent curve to curve):

From the POINT OF BEGINNING; Thence, North 90° 00' 00" West, 129.16 feet to a point for corner;

Thence, North 00° 00' 00" East, 100.00 feet to a point for corner, the beginning of a curve; tangent

Thence, 61.46 feet along the arc of a ____ curve to the right, having a radius of 39.13 feet, a central angle of 90° 00' 00", and a chord which bears North 45° 00' 00" East, 55.34 feet, to a point for corner, the beginning of a compound curve; non-tangent

Thence, 47.09 feet along the arc of a ____ curve to the left, having a radius of 29.98 feet, a central angle of 90° 00' 00", and a chord which bears North 45° 00' 00" East, 42.40 feet, to a point for corner, the beginning of a compound curve; non-tangent

Thence, 94.33 feet along the arc of a ____ curve to the right, having a radius of 30.03 feet, a central angle of 180° 00' 00", and a chord which bears North 90° 00' 00" East, 60.05 feet, to a point for corner;

Thence South 00° 00' 00" West, 169.11 feet to the POINT OF BEGINNING and containing 0.483 acres of land.

Civil 3D 2011
Windows 7 x64

View 3 Replies View Related

AutoCAD Civil 3D :: How To Create Reverse Curve With Straight Portion In Between

Aug 5, 2013

how to create reverse curve with straight portion in between , as their is no option of creating reverse curve with straight portion in civil 3d , duding designing a hill road what ever the reverse curve you design will be wrong and superelevation generated will also be wrong as it do no include straight in between the curves (ie reverse curve should contain transition curve transition straight transition curve transition.)

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved