AutoCAD Civil 3D :: Reverse Profile For Segment
Mar 5, 2013
We have a large pipe project that forms a very large 'C' shape. To follow convention with advancing stations from left to right and north being up, we are running into some problems.
1). For Civil 3D, can you reverse the profile for a section, say station 9+00 to 18+00 only. The remainder would be one direction.
2). What do others use for convention for north arrow direction and advancing stations?
Our first sheet goes from east to west, the second and third sheets run north to south, the next ones are west to east, and the final ones are north to south.
3). What will be the layout/formatting?
View 5 Replies
ADVERTISEMENT
Jul 13, 2012
I need to create a profile view that starts at Station 189+00 and ends at Station 175+00 such that the stationing of the profile decends from left to right. How do I do this in Civil 3D 2010?
View 5 Replies
View Related
Jun 14, 2012
I have a special ditch profile that I'd like to use a linetype with arrows on. Currently, it shows the arrows going up station with my mainline profile. i.e. now water does flow uphill...
How can I flip this line?
View 9 Replies
View Related
Nov 27, 2012
Flow segment label using total Flow Type travel time for each segment:
C3D 2014 SP1
W7x64; i7 8gb; Radeon HD 5700
[URL]....
View 4 Replies
View Related
Sep 9, 2012
I want to draw triangle in segment of polyline in segment direction.
I have target segment and center point of it:
Polyline line = ...
LineSegment3d centerSegment = line.GetLineSegmentAt(centerSegmentIndex);
Point3d centerPosition = centerSegment.MidPoint;
I can find direction of this segment:
Vector3d zaDirection = line.GetLineSegmentAt(centerSegmentIndex).Direction;
Next, I create list of points:
List<Point3d> points = new List<Point3d>();
points.Add(centerPosition);
points.Add(centerPosition.Add(new Vector3d(ZASize, +ZASize, 0)));
points.Add(centerPosition.Add(new Vector3d(ZASize, -ZASize, 0)));
And draw it:
wd.Geometry.Polygon(new Point3dCollection(points.ToArray()));
Ok, I have triangle but... it's not in segment direction, it's X-direction.
I try to rotate it:
points.Add(centerPosition.Add(new Vector3d(ZASize, +ZASize, 0)).RotateBy(0, zaDirection, centerPosition));
But it's not the same as I want.
How I can draw triangle by serment direction?
View 5 Replies
View Related
Oct 9, 2012
I have a subdivision plat that I'm working on with a curved lot line. When I label this particular lot line, Civil 3D labels it like it's two different segments. In other words, instead of labeling the line as a 100 foot long arc with a radius of 100 feet, it labels it as a 60 foot arc and a 40 foot arc. I can't figure out how to combine the two segments.
All of the lots lines were created from polyline objects, and there was no break in the original line work (nor is there any indication of a break in this location when I select it).
View 2 Replies
View Related
Dec 17, 2012
I have a polyline in my drawing, consisting of arcs and lines all joined together. It is a waterline and I cannot get it to reverse.. it is reading ----M----- instead of -----W-----
View 9 Replies
View Related
Jun 19, 2013
Is there a way to straighten a curved parcel segment? IOW Turn the curve in to a straight line.
I thought I has seen this coverd here before. But I can't find it.
Civil 3D 2012 SP 2.1
Dell Precision T7400, Xeon CPU 3.16 GHz
Win 7 Pro, 64-bit,12 GB RAM, Nvidia Quadro FX 4600
View 9 Replies
View Related
Nov 26, 2012
I create a feature line including some arcs. While editing I need to redimension the feature line, but the arcs will lose tangency. Therefore I have to break/ trim/delete/manually edit the tangents until they intersect and then FILLET them to get a new arc. I tried EDIT CURVE with 0 Radius but it's not acceptable. Any workaround on this one (filleting feature lines like polylines or a closing option)?
View 2 Replies
View Related
Jul 12, 2012
I have made line types with text and need to reverse the direction that the text reads. The text autocorrects based on UCS north. The UCS in the drawing is rotated 90 degrees so line text reads upside down. I type in the reverse command but the text does not change.
View 1 Replies
View Related
Mar 27, 2011
is there is any way to reverse the alignment direction
View 3 Replies
View Related
Oct 28, 2013
I need to put a reverse curve on an alignment. I have tried using two free curve fillets,(between two entities, radius). the first curve was fine, but it would not allow the second curve. I also tried using a floating curve ( from entity radius through point) first, but it did not work.
View 2 Replies
View Related
Aug 15, 2010
Can I reverse the direction of an existing horizontal alignment line in C3d 2011?
View 9 Replies
View Related
Jul 3, 2012
I have a bunch of lines that are created with multiple segments. I'd like to annotate the total length. I can't figure out to do this without labelling each segment along the line using Line and Curve commands. How do I get one annotation that only shows the total of all the sements?
View 9 Replies
View Related
Oct 8, 2011
How can I remove Parcel Segment Element? I have oPar as AeccParcel and oSeg as AeccParcelSegment
AeccParcelLoop loop = oPar.ParcelLoops[0];
List<AeccParcelSegmentElement> SegElem = new List<AeccParcelSegmentElement>();
foreach (AeccParcelSegmentElement segE in loop)
{
SegElem.Add(segE); // Seem not good idea here.. because all segE in this list look the same
}
foreach (AeccParcelSegmentElement oSE in oSeg)
{
if (!SegElem.Contains(oSE))
***delete/remove oSE here //can't find info, how to delete/remove this segment element
}
View 6 Replies
View Related
May 20, 2013
I was upgraded to version 14 on Friday, and when I opened my drawing that was started in version 2011, the parcel that I created looks different, and not in a good way. My parcel boundary now appears as if it were a polyline with linetype generation is enabled, whereas in previous versions, linetype generation would reset at each vertex. How do I change the way my parcel segments display in version 14?
View 1 Replies
View Related
Jan 30, 2013
I am trying to create surface elevation labels along a polyline and I am having an issue with the label anchor point. I have created a line label style that uses a reference text to produce the elevation from a specified surface, however when I insert the label the default anchor point for the label is in the center of the line segment and that is where the reference text is taking the surface elevation. I am looking for the elevation of the surface at the start of each line segment, and I do not know how I can make it stop defaulting to the center of the line segment.
Attached is an overview of what my labels look like, where the anchor point is, and the layout properties within my label style. I am using C3D 2012.
View 9 Replies
View Related
May 8, 2012
where the setting is to reverse the flow of a pipe. I have the flow arrow shown in the wrong direction plus am showing a negative slope on a pipe, which should never be done.
View 9 Replies
View Related
Nov 28, 2012
When I first created my surface model, any point I moved would snap back to its original position like a rubber band. I had to do some edits so I unlocked this by .... Survey Tab>My survey database>Survey Points>Points, and then picked "Unlock In Drawing". This command unlocked All points in the drawing so I could edit them.
Now that I am done with my edits, how do I reverse this command globally, so as to get ALL points locked again (so they snap back to their original position like a rubber band if moved, like before) ?
View 2 Replies
View Related
May 9, 2012
handle a PRVC label? Right now I have the PVC and PVT labels on top of each other. Is there a nice solutioon other than making a new label style?
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
View 2 Replies
View Related
Jan 7, 2014
I can't figure out how to reverse the flow direction on my pipe so I was going to just redraw it but after I delete a pipe and rt click to edit network the "add pipes and stuctures" won't let me add anything. I'm just guessing I need to reverse the flow direction because my invert out and invert in elevations are backwards in the profile. I'm working in Civil3D 2012.
View 6 Replies
View Related
Jul 29, 2012
I want to add a single transition curve between two reverse curve in Civil3D.
I am using Civil3d2012.
View 3 Replies
View Related
Dec 5, 2013
When preparing surveys i often use the annotative labels and tables available in Civil 3d. I am familiar with modifying label & table styles, but i have not yet been able to figure out how i can add a column to my table that contains fillable text. Because of that i am forced to create a table and then add text in paper space adjacent to or over the top of it.
View 1 Replies
View Related
Mar 1, 2013
I have an alignment label that I normally use to show the PVI's of a profile in the plan view.
This is a little unusual, but in a specific case I wanted to design my profile at one alignment, but show it at another. I designed my swale profile in the pathway profile view and then superimposed the swale profile on the swale profile view. I then went back to the swale alignment to add these labels.
It's a no-go AFAICT. The only profile available for me to select for these labels is the original ground profile from the surface.
View 5 Replies
View Related
Nov 4, 2013
I'm working with a structure profile label style and it seems like the only way to anchor the position of the label is based on offsets from the structure itself... Any way to position the label based on the top of the profile view, so that I could make all of my labels horizontally aligned above the profile view?
View 9 Replies
View Related
Mar 14, 2013
Im creating a Profile Bandset and would like to have multiple surface/profile elevations shown, ie: EG, FG, Back of Curb and Back of walk. While creating this bandset I see that the text component editor properties only has code for profile 1 elevation and profile 2 elevation in the properties area, which the code for this looks like below.
<[Profile1 Elevation(Uft|P2|RN|Sn|OF|AP)]>
<[Profile2 Elevation(Uft|P3|RN|AP|Sn|OF)]>
Ive tried to write my own code using the profile 2 as an example but it doesnt seem to work as a 3rd surface/profile and only seems to mimic the profile 2 elevation when placed in the band
My questions are as follows
1) does Civil 3d only allow 2 surface elevations in any band set? if it does allow more profiles/surface elevations what am i missing to create it?
2) if Civil 3d does alow for multiple surfaces to be shown in the band set how do i get the text component editor to supply the extra profile elevation codes? or would i need to create from scratch
3) if i need to write the code from scratch does any listing of the codes and meanings of each code ie what does RN, Uft, Sn and so forth do and mean .
View 3 Replies
View Related
Mar 5, 2012
I have a group of profiles in a drawing and I want to change how one of the profiles is displayed through the profile view style manager, but I do not want to change how all of the profiles look. Is there a way to change the way a single profile looks without changing all of them?
View 2 Replies
View Related
Jun 17, 2013
I have a profile showing proposed storm sewer, existing sanitary, rock surface, existing surface, and proposed profile. Today for some reason the proposed profile and labels, and the existing surface are not showing on the profile and I'm not sure what has changed or how to get them back.
View 3 Replies
View Related
Jan 17, 2012
I am working C3D 2012. I have a proposed alignment and profile design by another firm that I had to tranfer into C3D. I had no problem getting the horizontal alignment to display from a text file. I tried to do the same with the profile by using the 'create a text file and create the profile from file' command. I got the POB, PI's, and POE to display. I then defined the VC. I wanted to verifiy that the profile was indeed accurate compared to what we were provided. So I tried to execute a profile report PVI Station and Curve Report - I keep getting an error that "No FG profiles in dwg".
I know the Proposed profile is indeed set to proposed in the properties. I have noticed that the icon next to the profile I create from the text file is different than the profiles created from scratch.
Is there a way to convert this profile to be recognized as a FG profile?
Intel Core i5-2500K CPU @ 3.30 GHz
8.00 GB
64-bit
View 9 Replies
View Related
Mar 12, 2012
I have edited the "GeneralLegalPhrasings.xml" file used for the parcel report "General_Legal_Description_for_Parcels".
Two issues: 1. it will not label a reverse curve properly....it shows them all as "compound curves". 2. A curve to curve is always shown as "NonTangent".
I've attached the .xml file (I only edited the imperial parcels - the second large group of <Metes>).
Quite simply, these two "types" below have the words "reverse curve" and tangent or non-tangent accordingly in the output phrase, but it only creates non-tangent compound reports.
Curve to TangentReverseCurve
Curve to NonTangentReverseCurve
This is the report from the parcel in the attached dwg file (notice the "curve to the left" -> "curve to the right" labelled as compound, and all non-tangent curve to curve):
From the POINT OF BEGINNING; Thence, North 90° 00' 00" West, 129.16 feet to a point for corner;
Thence, North 00° 00' 00" East, 100.00 feet to a point for corner, the beginning of a curve; tangent
Thence, 61.46 feet along the arc of a ____ curve to the right, having a radius of 39.13 feet, a central angle of 90° 00' 00", and a chord which bears North 45° 00' 00" East, 55.34 feet, to a point for corner, the beginning of a compound curve; non-tangent
Thence, 47.09 feet along the arc of a ____ curve to the left, having a radius of 29.98 feet, a central angle of 90° 00' 00", and a chord which bears North 45° 00' 00" East, 42.40 feet, to a point for corner, the beginning of a compound curve; non-tangent
Thence, 94.33 feet along the arc of a ____ curve to the right, having a radius of 30.03 feet, a central angle of 180° 00' 00", and a chord which bears North 90° 00' 00" East, 60.05 feet, to a point for corner;
Thence South 00° 00' 00" West, 169.11 feet to the POINT OF BEGINNING and containing 0.483 acres of land.
Civil 3D 2011
Windows 7 x64
View 3 Replies
View Related
Sep 8, 2012
How to generate reverse curve details from the alignment
i.e. i want to generate
delta
length of reverse curve
transition length
deflection angle (delta) of transition curve
shift
etc ........
i want them to generate in the plan.
View 2 Replies
View Related
