Is there a way to lock the layer setup in a viewport, so when i copy and paste it to another paper space tab in the same or different cad file, it keeps the same setup?? (layers frozen / thawed)?
View 6 RepliesOkay, likely a stupid question - I have a map I created as a .psd with multiple layers. I would like to create a document with two copies of this map in it so I can print two maps on one sheet of paper (i'm trying to save paper).
How do I copy all layers over to this new document? Is there an easy way to make a new document with 2 instances of my map?
I'm trying to build a sprite image for a website based on a graphic that I created with Paint.NET.
The graphic has about 6 different layers.
To make the sprite image, I need the items in one layer to be duplicated in the exact same spots only shifted down by an integral number of the height. So, if the original image is 400px, I stretch the canvas out to 1200px. Now I want to copy each of the 6 layers and paste them exactly 400px down, then copy each of the 6 layers and paste them exactly 800px down.
I'm guessing there is a way to do something like this using the scripting ability of Paint.NET, but I have never used that feature before.
Using GIMP 2.6.11 under Windows XP
Is this real? I am really amazed that there is no way to do this. Am I missing something? I have multiple images, each with a unique background layer. On top are multiple other layers, both images and text layers. I was editing one and was about to save it but then realized it was on the wrong background.
All I want to do is select four or five layers from this unsaved image with Background A, copy them and then open an image with Background B and paste them in so there will be minimal issues with alignments and such. I have been editing each of these four layers and there are a fair bit of changes that have been made to just throw them away and start over. The background is not the only difference between the images, it is just what I use as a reference so copying that over to the unsaved image would also require multiple layer copy/pasting.
I have already tried linking the layers but any copy/cut/paste seems to only work on the active layer, unless I am again missing something. This seems like a really fundamental function to not be supported.
I am working on a project and when I try to copy and paste unlocked layers to paste them in to another image it doesn't paste. The only thing it pastes is the text unformatted. I tried resetting the settings by removing the setting file to see if I can set Illustrator back to square one and it isn't working. See Picture for before (copy) and After (paste)
[URL]
I am also using windows 8 on a pc. I would say it was the OS but it was working fine untill yesterday.
With the code below the draworder is not retained , does anynone knows how to retain the draworder in a .net copy command?
Function MaakKopie(ByVal objIds As ObjectIdCollection) As ObjectIdCollection
MaakKopie = New ObjectIdCollection
Dim doc = Application.DocumentManager.MdiActiveDocument
Dim dwg = doc.Database
Using doc.lockdocument
Using transactie = doc.TransactionManager.StartTransaction()
[Code]....
So I have a viewport, viewing exactly what i want it to in model space but it's not where i want it in paper space. When i move the viewport entity in paper space it's changing my view in model space. How do I lock what the viewport is seeing?
I've tried locking, that doesn't seem to do it. I've tried yelling at it and that's not working. I'd try beating it with a stick but I don't know if the computer could handle it.
I got a word doc file but when I copy and paste the text into coreldraw I lose all the italics and bold. It's 4 pages with lots of bold and itallics and needs to be reflowed in draw but retain exact italics and bold. When I paste it into draw, I lose all the bold/italic formatting. Are there any workarounds to get the bold and italic text to copy and paste into draw?
View 17 Replies View RelatedLooking for views on what the best method is to copy a selection of parts in IV 2013 which will result in the copied selection to retain it's constraints ? I have an assembly which I have used the mirror method on a batch of parts, also used the standard copy method and pattern components.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
When I copy a viewport in a layout it does not create another viewport, only a poly line.....
View 6 Replies View RelatedI have 102 layout tabs and many more to come on this project. Each layout tab is a different scale (I know, awesome, right?). Is there a quick way to lock/unlock the viewport? I'm ctrl+dragging to create new layouts and it's simply annoying to click the little lock button to change the scale. (**** first world problems.)
Tried messing with the hotkeys but I can't even get F1 to disappear with LT like I can with full version.
When I right click on a viewport I no longer get the menu that includes the lock/unlock choice, or anything else. I can select the viewport but I have no control over it. Also when I select objects the layer information is not displayed. Until today I did not have this problem. I'm thinking it might be a settings issue, because if I open this file up on another computer I can control viewport as usual. The only think I can think of that I may have done different is I was experimenting with rotation of view ports.
View 7 Replies View RelatedIf its possible to have a viewport stay locked on a geometry in model space?
For example- we layout our page geometries in model space and outline them in a VP in paperspace. however say we move the entire drawing in model space- we have to go back and redo every viewport on every page. is there a way to prevent this or stop this from happening?
What happened to the lock pan and zoom on the view port background menu? Why would they take that out?
View 3 Replies View RelatedI'm looking up what to do on digital tutors. It shows how to add blueprints to the viewport background and have it locked in via bitmap so that you don't need to use planes. I was doing fine following the instructons until it showed a button to lock the zoom/pan into place so that the image won't remain a constant size even if you zoom in and out. I can't find it on my '14 version, and where it is placed so that I can finish setting up my blueprints.
View 2 Replies View RelatedI'm currently working on a design and come to a point where I want to optimize my work. I have two layers both have its blend mode set to "Overlay".
The top one is at 40% opacity and the second one is at 19% opacity. My question is... How do I merge the two and yet still retain the look that I see on screen?
It perfectly fine if both Layers are identical in terms of blending mode and opacity, but when both are different I have a hard time collapsing the two together so that they look exactly what I saw before collapsing it. I've been living with this for a long time but now I need to know a solution to this.
Is it possible?
You know how when you cut and paste a viewport from one sheet to another and the viewport has to be turned ON by using Mview / ON - is there a way to set the default to always ON?
View 4 Replies View RelatedI was trying to recover a temporary file but as i know now, it's impossible. I entered a few commands relating to grips and something else wich i don't remember, and now I'm unable to lock/unlock viewports and when I select objects to copy and then press _CO or copy button or copy with base point, it deselects the objects and asks me to select them again.
View 8 Replies View RelatedI want to setup the viewport background, so I modified the jpg and scaled to 10cm 10cm. Also I set the system unit to 1 unit=1cm and display unit scale to cm. When imported, the jpg do not match to grid. And the size will enlarged to 400cmX400cm.
How can I match and jpg size and grid scale?
I have been unable to open multiple images and retain them on separate layers
View 10 Replies View RelatedI work at an architecture firm, in which we have many drawings, all with multiple sheets. (A1, A2, A3...etc.)
I'm wondering, is there a way to lock which layers are visible based on the sheet you select? I want to prevent someone from accidentally turning on HVAC information on a plumbing plan, if they do not check which sheet they are currently working in.
Is there a way to do this in a more permanent way, other than simply using the Freeze or thaw in current viewport button in the layer pulldown menu?
i have created a presentation where i have frozen some layers in the object field. but later on when i create new layers of course they appear in this presentation until i freeze them. is there a clue to lock the presentation at a state to avoid updating the presentation by freezing manually each new layer .
View 1 Replies View RelatedIn my seemingly never-ending battle with standardizing, I have created a template with all the layers I expect to use in the future. The template will be used by both surveyors and engineers so I have layers that won't ever be used by surveyors. What I don't want is the surveyor to purge the drawing and delete all the layers that the engineers will need. I found the link below explaining and .lisp to replace deleted layers.
[URL]
Now, I am completely new at .lisp and how to use them. Also, this template is used in a program called BricsCad (some of the older generation still uses it instead of Autocad) and using .dws and checking isn't an option for them.
Can I setup certain layers so that they are always above all other objects?
View 2 Replies View RelatedI have autocad lt 2009, previously when I wanted to trace a drawing I would go to paint, copy the drawing and then paste it in autocad on one layer and do the drawing on another layer worked great, But now when I do the same process it doesn't work.....previously I could draw on the image, could edit the lines, copy, erase, move etc. But now when do this if I have to copy a line I select copy and when I click on the line I want to copy the jpg drawing goes away, or if I try to erase a line the drawing will get deleted, Do I need to uninstall autocad and reinstall?
View 5 Replies View RelatedWhen using the Clipboard to move entities from one drawing to another I need to open the window Tools; Options; and that's it for the Paste as Block and Paste Options to be available. What I mean is do I need to do this with each new session of LT? That I will need to check out. I tried my Template and it allowed Paste without going to the Options Dialog in the same session.
Object selection limit for display of grips is set to 32,000
One of our AC08LT workstations is very slow on Copy / Paste command... Not bound to one dwg... Happens with any dwg.
View 4 Replies View RelatedI'm using Autocad 2002.
I am having trouble copying out of a drawing (model space) which i received from someone else, and pasting into my own. The properties on the original dwg file suggest it was created Sept 2001. It appears to copy OK (copyclip/copybase), but when i jump into my file and try to paste, the command line just reads:
_pasteclip
and nothing appears in my model space.
I've tried zooming extents, exploding the original, changing layers and line types etc into the same as in my own dwg. I've also tried to convert/save the dwg file into dxf's and other version dwg's....without success.
I have about half a dozen drawings received from the same source, and they all let you copy data into them, but won't let you copy/cut out.
I have been having a problem with AutoCad 2012 LT when a am working in the model space I can you the ctrl c and ctrl p commands for a short amount of time and then they will not work. I can open a different model space and they will work in that one, but when I go back to the original one the will not work. I have tried shutting down autocad and the computer, but when I open everything back up the commands still will not work in that model space. I have reinstalled autocad and that brings them back for a short amount of time.
View 5 Replies View RelatedWhat is the correct way of copying an existing viewport, What I am actually doing is that to clone a layout by copying what is inside it, everything works smoothly except for the viewports.
I tried to use the clone method, but it didn't work, I also tried to use the copy from method but also to no avail.
In both cases the copied viewport is a dumb black rectangle.
Dim exkeyvport As Autodesk.AutoCAD.DatabaseServices.Viewport = DirectCast(acTrans.GetObject(objId, OpenMode.ForRead), Autodesk.AutoCAD.DatabaseServices.Viewport) Dim keyvport As New Autodesk.AutoCAD.DatabaseServices.Viewport keyvport.CopyFrom(exkeyvport) keyvport.UpdateDisplay() NewblkTableRec.AppendEntity(keyvport) acTrans.AddNewlyCreatedDBObject(keyvport, True)
The only way that partially worked for me was to create a viewport and copy its attributes one by one, but this is exhaustive and not reliable, so what is the proper way to copy a viewport?
In the current drawing I am working in, when I copy a viewport using CO command it copies the viewport but nothing is seen in it. You cannot active it like a normal viewport; it turns into just a square. I do not have this problem in any of my drawings, just this one. If I copy the viewport by right clicking copy with a base point then paste it in the drawing, the viewport works fine. This is more time consuming then just using the CO command.
View 9 Replies View Related