I am looking for a way to get my dimensions to round up instead of to the nearest.
For example... when I have one line that is 11-15/32" and one that is 11-17/32" and I need them to round up to the nearest 1/4". I want it to round up, showing 11-1/2" and 11-3/4" but instead i get 11-1/2" for both.
I know of DIMRND, but how is it possible make acad round dimensions UP (within a specified value) instead of to the nearest?
(This could be very handy to make various lengths of wooden baseboards and other mountings fit to machine cabinet standard lengths. I'd like to keep all the work in acad, and avoid ms-excel.)
I'm trying to create an accurate door schedule. I have curtain wall doors but on the schedule it rounds them to 1/16" How can I round the dimensions in the schedule to the nearest inch instead?
View 3 Replies View RelatedIs there some super secret option for making fractions in the drawing environment round up to the nearest, for example, 1/16th? There has to be, there just has to be.
IV2012
Windows XP SP3 32-bit
Intel Core 2 Duo 6400 @ 2.13 GHz
Nvidia Quadro FX 3450/4000 SDI 256MB Vram
2 GB Ram
160GB HDD
Way to round decimal dimension values to the nearest 1/16"? For instance, 43.0599 would display as 43.0625 (On a drawing). Tried playing with tolerances, but thought it would be better addressed as customization.
View 2 Replies View RelatedI have a roadway alignment and it is ending on 4+50.86, we simply want the alignment end to read on 4+51. is it possible to make this happen?
View 4 Replies View RelatedIn Illustrator CS6, Strokes are automaticly rounding to the nearest whole point size, and shapes I place in a given location are snapping to a grid that I can't seem to find anywhere. All my snaps are turned off, as well as "allign to pixel grid", and I can't seem to find anything in preferences or the transform or object panes that would affect these things. How do I disable both things?
View 5 Replies View RelatedWay to round decimal dimension values to the nearest 1/16"? For instance, 43.0599 would display as 43.0625 (On a drawing). Tried playing with tolerances, but thought it would be better addressed as customization.
View 7 Replies View RelatedHow to round down dimensions. I see some topics with writing LISP codes to do it but I have Autocad LT and those cant use LISP codes right? Ive also been looking into the Round off variable in the Primary units for the dimension style but its a little confusing. What I want to do is just round down my dimension at the given precision.
Lets say I have my precision set to .000 (even though I may have dimensions with .00) I want my dimension of 2.875500 to round down to 2.875 and not up to 2.876 then I also have a dimension of 2.90952929 and I want that to round down to 2.909 and I can not find a way of getting both of these to round down with the same setting on the same dimension style. Basically I just want to truncate my dimensions.
I know you can obviously set the tolerance in the styles to round to the nearest 1/16 or 1/32, but is there a way to make it always round a dimension up instead of to the nearest? IV2012
Windows XP SP3 32-bit
Intel Core 2 Duo 6400 @ 2.13 GHz
Nvidia Quadro FX 3450/4000 SDI 256MB Vram
2 GB Ram
160GB HDD
Round off of the value (length) of an inserted field, I wanted to make a round off for the field value that represents the length of a line but sounds that there is no option to do so.
For example:
the 2568 will be rounded off to be 2570
the 2563 will be rounded off to be 2565
This option is available for the dimension objects and wondering why it not offered for the inserted fields.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Is there a way to add "Round or Fillets to solids"?
View 2 Replies View RelatedI am using AutoCAD 2012. I am trying to use ordinate dimensions for the first time. So far, when I want to add the X and Y dimensions for a particular feature in my drawing, I choose the "ordinate" dimension type and then I select my feature. I drag my leader horizontally and it gives me the Y dimension. Then I choose the "ordinate" dimension type again, I select my feature again, and this time I drag my leader vertically and it gives me the X dimension.
I like how this works, but I think I would like it better if, rather than having two separate leaders for X and Y dimensions, I could just have one leader that would show both X and Y dimensions separated by a comma...i.e. something like [X:5.0; Y 7.5]
I have some aligned dimensions in model space - they look ok, text is oriented according to WCS. Also I have some viewports with UCS (I used commands UCS, PLAN) where dimensions look wrong, text is not oriented correctly. Is it possible to "update" dimension in viewport to orient text as in model space?
Programmatically created dims in viewports oriented as in model space, not considering current UCS.
When I make a layout with a part of my drawing in a viewport, I switch over to paperspace to draw dimension lines in it. Although the layout is displayed in another scale (e.g. 1:100) it puts the right dimensions at the drawing.
But now a problem appears:
With one of my drawings the layout does not put the right dimensions at the drawing in paperspace. I really don't know what went wrong. Strange dimensions appear, as if there must be a strange scale factor somewhere. (Dimlfac=1)
I'm working out some bugs that have cropped up now that I've upgraded to 2011. For starters, I can't seem to be able to snap to existing dimension lines like I used to, even though I have almost all of my snap types activated.
View 5 Replies View RelatedI have gotten to a point where I have the round text,, I have a seal with a blank space.. I would like to put the round text into the blank space,, but when I try, and no matter how I try,, the text is a white square with round text on it when I try to place it in the circle.
The other thought that came to me,, what if ..(the text circle size was a guess) the text does not fit.. how do I expand or collape it? I know I have in the pass while playing with round text.. gone back to that effect and changed angles, start points etc.. is that the only way?
I have attached what I have so far. ( I tried to attach the Paint.net file but I guess you can't, so these are the two I am working on,, as layers in Paint.net)
Is it possible to suppress alternate dimensions below a certain value? I would like my dimensioning to be set up as follows.....
everything above 8 feet
97 1/2" [8'-1 1/2"]
everything below 8 feet
94 3/4"
I had the need on occasion to dimension in Paper Space. I set up a "Dim Style" to accomplish this in either 1/8" or 1/4" Scale. The problem I am having is the consistency of the actual dimension.
For example: I could draw a simple box 10'x2'. When I dimension in Paper Space, sometimes it correctly displays the dimensions and sometimes it incorrectly displays the dimension.
I attached 2 screen shots of what is happening. Notice the dimension on top of the box shows 10', but when I dimensioned the bottom of the box it shows 480'. This seems to work at random.
The other screen shot shows the Dim Style settings I used.
I am unable to see the dimensions that I measure using power dimensions as per the attachment on the drawings itself. If i want to see it, I have to select the green line, and right click and select the line and select standard as the dimension style. I did not have to previously do all of this.
View 1 Replies View RelatedI've completed a drawing, with dimensions and everything and I have to reduce it to 1:2 scale to fit my drawing frame. How do I do this without changing the dimensions? Every time I reduce it the dimensions halve as well!
View 9 Replies View RelatedWe do a lot of labeling in paper space and have been encountering a problem with our dimension command mislabeling lengths and widths. Please see attached DWG. The road width should be 24' and its labeling it 880'. BUT measuring hoizontally it seemed to work fine. Really strange.
I am using the dimension command and snapping nearest and perpendicular. If I just click without using osnap it seems to work.
We tried using the DIM / DIMFLAC / V / and selectiong viewport
The funny thing is that I dont have this problem with every drawing. Just some seem to have this glitch.
I have some serious fight this morning with AutoCAD. I have to dimension my drawings properly so it can be build. I did some already, a few aligned dimensions in an layout snapping on modelspace objects. when i put them all is fine and right dimensions.
BUT after i saved, closed the file and opened it again those dimensions are everywhere exept where i put them originally. And no the modelspace objects are not moved.
How can this be? can i solve this? or is this a know bug for AutoCAD 2012? i can't check all the dimensions before publisching again and again.
How can I set dimensions to not show inch tick by default just the number?
View 1 Replies View RelatedWhy is it that some dimensions in a viewport are out of sync with the rest of the dimensions? Eg. a correct dimension is 240, but the next time you dimension the same distance, you get 24 as a dimension figure?
Also, in a long run of continued dimensions one or two of the dimensions is out of scale? I have tried making all dimension Annotative, same dimstyle, etc.
I think sometimes Autocad forgets that it is in a viewport, so some dimensions are correct to the viewport scale while others are to the limits of the paper size?
When dimensioning in paper space and move or make any adjustment to the viewports the dimensions go haywire and move of the parts but not all dimension and not all viewports are doing this. I'm using the same dimension style and templates that I normally use.
View 2 Replies View RelatedIm trying to find a way to select just the vertical dimensions. Quick select doesn't work because it selects every dimension.
View 2 Replies View RelatedI have an existing facility drawing that I'm trying to edit and when I try to dimension something it disappears after I click enter for the final time. I've tried to explode the drawing numerous times, save it in different formats, and copy and paste it to a new drawing. Nothing seems to work. How can I get the dimensions to show up?
View 9 Replies View RelatedI am looking for a fix to the issue when scaling a view in MView from Paperspace all the dimensions in paper space move to outside the dinamic area of the border?
View 1 Replies View RelatedI'm trying to figure out two things that have changed:
1) Lets say i create a polyline, lets say its 15 inches long. I used to be able to click on it and have the length show up in my properties. it no longer does that.
2) Lets say i create a polyline, it's green and has a dot pattern. I decided i wanted to change it to yellow and hidden pattern. I can no longer select the line and change it under the properties, it will change it in properties, but not on my screen. then when i draw a new line it will be yellow and hidden. I end up having to matchprop to make it work.
Using the same template Text and Dimension style all of the sudden the text is vertical and mirrored and the dimension text is mirrored under the dim line ( above the dim line in normal conditions)
What could be the problem? I did not change anything in the settings, voluntarily, I use this template for years and never had a problem with it till now.
See the bubbled text in the attached PDF.