AutoCAD 2010 :: Dimensions Moving In MVIEW?
May 15, 2013I am looking for a fix to the issue when scaling a view in MView from Paperspace all the dimensions in paper space move to outside the dinamic area of the border?
View 1 Replies
ADVERTISEMENT
AutoCAD 2010 :: Mview Lock On / Off Not Working The Same
Mar 12, 2012For years, I've been scaling viewports in my Layout tabs with this process:
1. MVIEW to make viewport.
2. Switch to MODEL, Zoom, Scale, 1/## XP
3. Switch back to PAPER, MVIEW, Lock, ON.
4. Copy Layout tab
5. In new Layout tab, MVIEW, Lock, OFF.
6. Switch to MODEL
to Pan to the area for Sheet # 2, Zoom, Scale the viewport for that sheet.
In 2012, when I MVIEW, Lock, OFF - it doesn't seem to turn off the Lock on the Viewport. I can't unlock a viewport to re-center / scale it.
And regarding viewport locking/unlocking issues
AutoCad 2D :: Dimensions Moving On Their Own?
Sep 3, 2013I am currently dimensioning some floor plans and I have noticed that sometimes after a save or coming out of x-ref edit in place some dimensions will suddenly move sometimes just one node point sometimes both. I am talking about a 100m move not just slightly out of line!
The floor plan consists of an x-ref for the structure internal and external An X-ref for the stacks.
All partitions, electrics, doors, bathrooms furniture etc are directly drawn into this drawing so dimensions should be snapping to elements within the drawing occasionally it will be a junction between x-ref elements and non-xref (but still the end point of a line.) Dimassoc is set to 2 All dimensions are annotative and are in model space.
They are mostly drawn using the continue dimension command.It usually happens with 2 or 3 dims at a time but one time there were about 20 and I lost the will to live.
AutoCAD Inventor :: Editing Sketch - Members Moving To Dimensions
Jul 23, 2012(in Inventor) sometimes I am beset with a problem that I want to edit my sketch but sketch members like line(s),circle(s) are moving to dimensions which I don't want. The sketch is moving. How can I overcome this problem,
View 9 Replies View RelatedAutoCad 3D :: Camera Does Not Save MView
Dec 7, 2011I created a 3d object in AutoCAD 2012. Set a camera at desired location.
Then switch to paper space, created an mview and set the camera view, then added some mtext and dimensions. Locked the display view, save my work and close AutoCAD. Now here's the exciting part. i re-launch AutoCAD and open the drawing. The drawing was messed up. It does not display the correct camera view that was previously saved. It sounds strange but I do it over and over and same thing happens.
AutoCAD Civil 3D :: Mview Rectangular To Polygon
Mar 8, 2013Is there anyway to change a rectangular Mview to a polygon one. I have all the text and call outs and now the engineer wants to blank out everything behind the match lines. I will probably never make a rectangle mview again.
View 4 Replies View RelatedAutoCad :: Mview Shows Empty Space?
Dec 5, 2013I have done this before and it worked just fine, i saw the whole model and printed the view i needed. UCS symbol is exactly at the corner of the model and everything shows in the model space, but whatever i do paper space remains blank. I am lost and devastated. I attached print screens of the model and the layout.
View 9 Replies View RelatedAutoCAD Architecture :: MView VPort Naming And Title Marks
Sep 20, 2012I want to get up to speed on the whole sheet, navigator, title mark thing but it seems so much more straightforward in Revit. I used to use mview and layouts and would title by hand on paper space layouts. With the functionally of Revit (it seems to be straight forward to drop in field information in title marks, sheet, numbers etc.) I am having problems in the navigator.
My process now in Autocad 2013 is to draw in model space, go to a layout in paper space, insert using 'mview' with the scale appropriate to the paper space sheet (that has an imported border with logo company info etc.). In order to automate the title marks, I use the tools pallet and drag that block into the layout. The title mark won't recognize the mview, so I made vports (using the vports dialog) but these boxes disappear when I exit that vport dialog box. When I insert the title mark from the pallet these vports show up when dragged over, but disappear again when placed or when the cursor is moved away. There appears on these vports to be a title mark location already as the lower left hand corner has a circle (as to show a view number).
So is the mview not a vport? How do I get the current vports to show their borders on the layout or how do I get the mview border to become a vport? I'd like to get the automatic fields to work so that I can enjoy the functionality I am currently enjoying in Revit. 'Why not just use Revit', there are times when our office needs to use autocad when revit doesn't make sense.
AutoCAD 2010 :: Use Ordinate Dimensions
Jan 12, 2012I am using AutoCAD 2012. I am trying to use ordinate dimensions for the first time. So far, when I want to add the X and Y dimensions for a particular feature in my drawing, I choose the "ordinate" dimension type and then I select my feature. I drag my leader horizontally and it gives me the Y dimension. Then I choose the "ordinate" dimension type again, I select my feature again, and this time I drag my leader vertically and it gives me the X dimension.
I like how this works, but I think I would like it better if, rather than having two separate leaders for X and Y dimensions, I could just have one leader that would show both X and Y dimensions separated by a comma...i.e. something like [X:5.0; Y 7.5]
AutoCAD 2010 :: Dimensions In Viewports With UCS?
Jul 23, 2012I have some aligned dimensions in model space - they look ok, text is oriented according to WCS. Also I have some viewports with UCS (I used commands UCS, PLAN) where dimensions look wrong, text is not oriented correctly. Is it possible to "update" dimension in viewport to orient text as in model space?
Programmatically created dims in viewports oriented as in model space, not considering current UCS.
AutoCAD 2010 :: Dimensions In Paperspace
Jun 25, 2013When I make a layout with a part of my drawing in a viewport, I switch over to paperspace to draw dimension lines in it. Although the layout is displayed in another scale (e.g. 1:100) it puts the right dimensions at the drawing.
But now a problem appears:
With one of my drawings the layout does not put the right dimensions at the drawing in paperspace. I really don't know what went wrong. Strange dimensions appear, as if there must be a strange scale factor somewhere. (Dimlfac=1)
AutoCAD 2010 :: Snapping To Dimensions
Mar 28, 2012I'm working out some bugs that have cropped up now that I've upgraded to 2011. For starters, I can't seem to be able to snap to existing dimension lines like I used to, even though I have almost all of my snap types activated.
View 5 Replies View RelatedAutoCAD 2010 :: How To Suppress Alternate Dimensions Below A Certain Value
Nov 12, 2012Is it possible to suppress alternate dimensions below a certain value? I would like my dimensioning to be set up as follows.....
everything above 8 feet
97 1/2" [8'-1 1/2"]
everything below 8 feet
94 3/4"
AutoCAD 2010 :: Dimensions In Paper Space
Feb 16, 2012I had the need on occasion to dimension in Paper Space. I set up a "Dim Style" to accomplish this in either 1/8" or 1/4" Scale. The problem I am having is the consistency of the actual dimension.
For example: I could draw a simple box 10'x2'. When I dimension in Paper Space, sometimes it correctly displays the dimensions and sometimes it incorrectly displays the dimension.
I attached 2 screen shots of what is happening. Notice the dimension on top of the box shows 10', but when I dimensioned the bottom of the box it shows 480'. This seems to work at random.
The other screen shot shows the Dim Style settings I used.
AutoCAD 2010 :: Unable To See Dimensions On Drawing?
Jul 10, 2013I am unable to see the dimensions that I measure using power dimensions as per the attachment on the drawings itself. If i want to see it, I have to select the green line, and right click and select the line and select standard as the dimension style. I did not have to previously do all of this.
View 1 Replies View RelatedAutoCAD 2010 :: Scaling Without Changing Dimensions
Mar 26, 2012I've completed a drawing, with dimensions and everything and I have to reduce it to 1:2 scale to fit my drawing frame. How do I do this without changing the dimensions? Every time I reduce it the dimensions halve as well!
View 9 Replies View RelatedAutoCAD 2010 :: Labeling In Paperspace - Dimensions Way Off
Jun 18, 2012We do a lot of labeling in paper space and have been encountering a problem with our dimension command mislabeling lengths and widths. Please see attached DWG. The road width should be 24' and its labeling it 880'. BUT measuring hoizontally it seemed to work fine. Really strange.
I am using the dimension command and snapping nearest and perpendicular. If I just click without using osnap it seems to work.
We tried using the DIM / DIMFLAC / V / and selectiong viewport
The funny thing is that I dont have this problem with every drawing. Just some seem to have this glitch.
AutoCAD 2010 :: Dimensions Not Staying At Their Position
May 23, 2011I have some serious fight this morning with AutoCAD. I have to dimension my drawings properly so it can be build. I did some already, a few aligned dimensions in an layout snapping on modelspace objects. when i put them all is fine and right dimensions.
BUT after i saved, closed the file and opened it again those dimensions are everywhere exept where i put them originally. And no the modelspace objects are not moved.
How can this be? can i solve this? or is this a know bug for AutoCAD 2012? i can't check all the dimensions before publisching again and again.
AutoCAD 2010 :: No Inch Mark On Dimensions?
Mar 18, 2013How can I set dimensions to not show inch tick by default just the number?
View 1 Replies View RelatedAutoCAD 2010 :: Dimensions In Viewport Out Of Sync
Aug 26, 2010Why is it that some dimensions in a viewport are out of sync with the rest of the dimensions? Eg. a correct dimension is 240, but the next time you dimension the same distance, you get 24 as a dimension figure?
Also, in a long run of continued dimensions one or two of the dimensions is out of scale? I have tried making all dimension Annotative, same dimstyle, etc.
I think sometimes Autocad forgets that it is in a viewport, so some dimensions are correct to the viewport scale while others are to the limits of the paper size?
AutoCAD 2010 :: Round Dimensions Up Not To Nearest
Feb 23, 2012I am looking for a way to get my dimensions to round up instead of to the nearest.
For example... when I have one line that is 11-15/32" and one that is 11-17/32" and I need them to round up to the nearest 1/4". I want it to round up, showing 11-1/2" and 11-3/4" but instead i get 11-1/2" for both.
AutoCAD 2010 :: Paper Space Dimensions?
Jan 26, 2012When dimensioning in paper space and move or make any adjustment to the viewports the dimensions go haywire and move of the parts but not all dimension and not all viewports are doing this. I'm using the same dimension style and templates that I normally use.
View 2 Replies View RelatedAutoCAD 2010 :: Selecting Vertical Dimensions
Oct 24, 2012Im trying to find a way to select just the vertical dimensions. Quick select doesn't work because it selects every dimension.
View 2 Replies View RelatedAutoCAD 2010 :: Drawing Won't Show Dimensions
Mar 28, 2013I have an existing facility drawing that I'm trying to edit and when I try to dimension something it disappears after I click enter for the final time. I've tried to explode the drawing numerous times, save it in different formats, and copy and paste it to a new drawing. Nothing seems to work. How can I get the dimensions to show up?
View 9 Replies View RelatedAutoCAD 2010 :: Display Dimensions In Properties Box
Jan 24, 2012I'm trying to figure out two things that have changed:
1) Lets say i create a polyline, lets say its 15 inches long. I used to be able to click on it and have the length show up in my properties. it no longer does that.
2) Lets say i create a polyline, it's green and has a dot pattern. I decided i wanted to change it to yellow and hidden pattern. I can no longer select the line and change it under the properties, it will change it in properties, but not on my screen. then when i draw a new line it will be yellow and hidden. I end up having to matchprop to make it work.
AutoCAD 2010 :: Mirrored Dimensions And Text
Oct 5, 2012Using the same template Text and Dimension style all of the sudden the text is vertical and mirrored and the dimension text is mirrored under the dim line ( above the dim line in normal conditions)
What could be the problem? I did not change anything in the settings, voluntarily, I use this template for years and never had a problem with it till now.
See the bubbled text in the attached PDF.
AutoCAD 2010 :: Text Masking For Dimensions
May 21, 2012Is there command or option for masking the text of a dimension? If not, how to get around this?
View 3 Replies View RelatedAutoCAD 2010 :: Dimensions And Text Missing
May 23, 2013iam using autocad 2010.The dimensions and the text have suddenly disappeared even though the layers are on.
View 2 Replies View RelatedAutoCAD 2010 :: Origin Keeps Moving?
Jun 7, 2012I am inputting coordinates as to retain accuracy, but sometimes I realize the origin point moves and coordinates no longer work. How do I prevent it from moving, or is there a way to specify coordinates relative to another object?
View 1 Replies View RelatedAutoCAD 2010 :: Dimensions In Paperspace Change Without Notice
Oct 28, 2013See the attached JPEG files for a viewable explanation.
Dimensions placed in paperspace that are scaled by the viewports, change on their own. This happens at no apparent frequency. And for no apparent reason.
This has happened after I've saved a drawing and reopened. Also has happened when I've moved or stretched a viewport.
Currently I am using Autocad 2012, but this has been happening for some years.
AutoCAD 2010 :: Splines To Arcs - Rational Dimensions
Jul 27, 2012I am working on a drawing with a lot of splines. I need to dimension the curves to some rational dimensions which means I need to convert the splines to arcs. Is there away to do that?
View 4 Replies View Related