AutoCad 3D :: Camera Does Not Save MView
Dec 7, 2011
I created a 3d object in AutoCAD 2012. Set a camera at desired location.
Then switch to paper space, created an mview and set the camera view, then added some mtext and dimensions. Locked the display view, save my work and close AutoCAD. Now here's the exciting part. i re-launch AutoCAD and open the drawing. The drawing was messed up. It does not display the correct camera view that was previously saved. It sounds strange but I do it over and over and same thing happens.
View 3 Replies
ADVERTISEMENT
Mar 8, 2013
Is there anyway to change a rectangular Mview to a polygon one. I have all the text and call outs and now the engineer wants to blank out everything behind the match lines. I will probably never make a rectangle mview again.
View 4 Replies
View Related
Mar 12, 2012
For years, I've been scaling viewports in my Layout tabs with this process:
1. MVIEW to make viewport.
2. Switch to MODEL, Zoom, Scale, 1/## XP
3. Switch back to PAPER, MVIEW, Lock, ON.
4. Copy Layout tab
5. In new Layout tab, MVIEW, Lock, OFF.
6. Switch to MODEL
to Pan to the area for Sheet # 2, Zoom, Scale the viewport for that sheet.
In 2012, when I MVIEW, Lock, OFF - it doesn't seem to turn off the Lock on the Viewport. I can't unlock a viewport to re-center / scale it.
And regarding viewport locking/unlocking issues
View 5 Replies
View Related
May 15, 2013
I am looking for a fix to the issue when scaling a view in MView from Paperspace all the dimensions in paper space move to outside the dinamic area of the border?
View 1 Replies
View Related
Dec 5, 2013
I have done this before and it worked just fine, i saw the whole model and printed the view i needed. UCS symbol is exactly at the corner of the model and everything shows in the model space, but whatever i do paper space remains blank. I am lost and devastated. I attached print screens of the model and the layout.
View 9 Replies
View Related
Sep 20, 2012
I want to get up to speed on the whole sheet, navigator, title mark thing but it seems so much more straightforward in Revit. I used to use mview and layouts and would title by hand on paper space layouts. With the functionally of Revit (it seems to be straight forward to drop in field information in title marks, sheet, numbers etc.) I am having problems in the navigator.
My process now in Autocad 2013 is to draw in model space, go to a layout in paper space, insert using 'mview' with the scale appropriate to the paper space sheet (that has an imported border with logo company info etc.). In order to automate the title marks, I use the tools pallet and drag that block into the layout. The title mark won't recognize the mview, so I made vports (using the vports dialog) but these boxes disappear when I exit that vport dialog box. When I insert the title mark from the pallet these vports show up when dragged over, but disappear again when placed or when the cursor is moved away. There appears on these vports to be a title mark location already as the lower left hand corner has a circle (as to show a view number).
So is the mview not a vport? How do I get the current vports to show their borders on the layout or how do I get the mview border to become a vport? I'd like to get the automatic fields to work so that I can enjoy the functionality I am currently enjoying in Revit. 'Why not just use Revit', there are times when our office needs to use autocad when revit doesn't make sense.
View 1 Replies
View Related
Jun 17, 2009
In camera RAW, to save a JPG you click on the 'Save image...' dialogue and another window opens with the JPG options. To skip this window and directly save the image, you hold down the ALT key and click on the 'Save image'. Is it possible to reverse these settings, so that if you want the JPG dialogue to open you have to hold down the ALT key and to save without the dialogue, you just click on the save button?
View 3 Replies
View Related
Sep 2, 2008
I have Photoshop 10.0 (Windows XP) and use it to edit my photos from my new Nikon D300 camera. I create and maintain my images in JPG format as a preference and have no plans of saving in RAW. My D300 includes 40 to 50 camera info/metadata elements including the camera and lens settings at the time the photo is taken. When I do a simple "Save As" in Photoshop 10 to a new JPG file (whether image adjustments are done to the source image or not), the new JPG file is stripped of about half or more of the original camera-specific metadata elements. Is there a Photoshop setting or Nikon/Photoshop plug-in that will force the software to preserve/retain the original metadata? (The Capture NX2 solution is not an option as the one key feature I use is Auto Levels - The Auto Levels feature in Capture NX2 washes out my photos to an undesireable state). Therefore, I need to continue using Adobe for the benefit of their better Auto Levels feature and I also use their automation heavily as I process 100's of photos at a time. The only drawback of Adobe right now is they discard most of the camera specific shooting data at the time of save. RAW is not an option as the file sizes are too large for my storage, sharing and usage needs.
View 1 Replies
View Related
Jun 11, 2013
Once i apply my presets on raw images in camera raw i click to save all of the photos as JPGs. At the begining the saving takes 1.5-4 seconds per image. After saving for a while computer slows down and it takes almost 10 seconds to save one image.
It took more than 10 hours to save 4000 raw images as JPGs.
Tech Specs:
Photoshop CS6 x64
Windows 7
ACPI x64 based PC
Intel i7 3.40GHz
Sata AHCI controller
NVIDIA GeForce GTX 560 Ti
Samsung SSD 840 Pro 256GB
View 1 Replies
View Related
Aug 4, 2013
In CS5 Bridge I want to see the exposure speed immediately for any chosen picture. So I choose exposure plus exposure correction in Bridge presets.
But after starting my PC the next time, this setting is automatically brought back to "exposure mode" plus "exposure index", which has the effect, that Bridge once again doesn't show the exposure speed (1/30 or 1/100) for the photos. What to do???
View 4 Replies
View Related
Jan 31, 2013
I have opened a jpeg as Camera Raw (7.3) and adjusted it and wanted to save it as jpeg, but the only option is *.dng?
View 3 Replies
View Related
Dec 29, 2013
Is there any way Lightroom 5 can save the information from my Nikon Cameras RAW file.
When I open my RAW files in Lightroom 5 all my camera settings are not saved.
Is there some way around this.
View 5 Replies
View Related
Jun 10, 2013
Camera Raw takes almost 2 seconds to save 103MB tiff file. (I use Photoshop CS6)When i save a bunch of tiff files, camera raw uses only half of my CPU and half of my RAM. In addition, I use SSD that writes 530MB/s outside Photoshop. According to these specifications it should save 5 images within one second. But it doesnt.
View 12 Replies
View Related
Sep 2, 2012
How do I set Camera Raw preference to: Save image settings in: Sidecar ".xmp" files?
View 11 Replies
View Related
Jun 2, 2010
For some reason when using the path option in inventor studio for camera animation the camera rolls for no reason?? I have created two helical curve sketches around my product, the outer curve is the path for the camera and the inner curve is the path for the target. Both curves are the same height and have 1 revolution. When i play the camera it works out fine untill it hits 1/4 of the way through and suddenly flips 180 degrees so now the camera is upside down, once it hits 3/4 of the way it flips back again to the correct rotation. If i dont create an inner curve for the target and place the target directly in the centre of my product with no path to follow the camera spins all over the place when it follows the curve.
View 9 Replies
View Related
Dec 15, 2013
I use autocad architecture 2013 and it works just fine until the save turns to qsave whenever i want to save a drawing by save, save as and ctrl+s it works as qsave..how can I turn it back to SAVE ?
View 9 Replies
View Related
Sep 15, 2013
Can't open file from Nikon D7100 in Camera RAW Plug-In,i have Photoshop CS5 and plugin is upgraded.Format NEF from Nikon D 7100 is not in this plug-in photoshop.
View 2 Replies
View Related
Dec 22, 2013
I am using Photoshop Elements 11, using WIndows 7 Operating System. I have a new camera Canon Rebel T5i, and having problem viewing images in raw format (cr2).Message in PE11, states, "Camera model not supported by installed version of Camera raw."
Canon software views images. Suspect my minimum camera raw plug in version does not support this new camera..I am unable to locate in the software any menu item that allows me to view the camera raw plug in version.
View 2 Replies
View Related
May 31, 2013
I don't know how to phrase it correctly but the 3d camera tracker inside of After Effects will only apply key frames to the null object. This causes the footage to rotate around itself.
View 4 Replies
View Related
Nov 13, 2012
Have no choices in the camera calibration tab inside camera raw plugin. Use CS3 and Raw 4.6. Are choices only available in later version or PS? Also in Raw preferences choice for camera serial number and also setting as defaults. Where to enter serial number etc.
View 1 Replies
View Related
Dec 28, 2011
I'm an amateur moving up to LR 3 and have been trying to learn this program by reading the LR3 book by Scott Kelby. He shows that the Camera Calibration feature has some settings for specific cameras yet the drop down menu has none listed. I've upgraded to 3.6 and the images were copied from raw to DNG.
View 6 Replies
View Related
Apr 7, 2014
I am relatively new to Lightroom. I have imported Panasonic Lumix DMC-FZ200 raw (.RW2) files into Lightroom 5.3. When I go into the Develop module under the Camera Calibration the only profile that shows up is Adobe Standard. My camera is supported according to the Adobe web site.
View 2 Replies
View Related
Nov 23, 2013
I am working on a project where I am incorporating 3d text into a shot with an onscreen talent speaking to the camera. I am trying to get the text to only move when the camera moves such as a pan or a hand held shake, making it look like it's part of the environment. It will track with the camera and looks great until my talent /subject moves, then the text moves with the subject. What am I doing wrong in my tracking? I have looked up tutorials and articles searching for others who have had this problem and cannot find anything that replicates my issue. Every tutorial I've seen does the same thing with fantastic results but I can never get the text to not move with my subject.
View 2 Replies
View Related
May 11, 2013
my PSE11 was working fine until i bought a new camera and tried to upload photos from my RAW files. It gave me this message
"Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.Please visit the Camera Raw documentation for additional information."
so i tried to install the update.... installed it fine, kept getting the same message when i would try to open the photo. after researching online i found the suggestion of uninstalling and reinstalling photoshop elements. i did that once, tried the update again...same results. uninstalled again. tried the update again and still getting the same message. ive checked the adobe website and everywhere i look says the version of the camera raw DOES support my camera (nikon D7100).
View 10 Replies
View Related
Dec 16, 2012
After an, automatic, update to camera raw 7.3 in Photoshop Elements 11 all Camera Profiles are gone. All that is left is "Matrix". I use Elements 11, windows Vista on a 64-bit machine, my camera is a Nikon D7000.
View 2 Replies
View Related
Dec 31, 2013
I am having a catastrophic error in Inventor 2013.
When I attempt to save a drawing I have completed, I cannot save!
Can't save, save as or any other variation of save.
This is my issue every time I click save.
View 2 Replies
View Related
Sep 14, 2013
I own a GoPro Hero 3 Black camera. I saw the Russell Brown demonstration of Camera RAW to correct lens distortion (
[URL].......
In this instruction, he takes images into Camera RAW and selects a tab called Profile, and it automatically detected the camera from metadata and made corrections.
I was sold, subscribed to Adobe Cloud, downloaded Photoshop and started following his tutorial. When I got to the lens correction part, my Camera RAW has no Profiles tab. Brown does say that you need the latest version, but I have assumed that since I just subscribed and downloaded, that I have that.
View 9 Replies
View Related
Jun 2, 2013
how can i create a camera profile with camera raw without x-rite or other third software?
i have a Colour Checker ,with different shade of gray and different colors
i remember about a script or something like that
i google a lot , but without luck
can i create my camera raw profile using a color checker with photoshop acr ?
i'm not sure but this should be the script [URL]....right? but i don't know how use it
is there a tutorial ? maybe a video to create a profile with camera raw.
View 2 Replies
View Related
Nov 25, 2008
I shoot photos with a Nikon D2X and my wife uses a Nikon D70. If I open a D70 raw file, and then go to camera calibration, the profiles available are for various standard profiles and D2X profiles. The D70 profiles do not show in the drop down list. All of the profiles have been downloaded, from Adobe, and installed.
If I open a D2X raw file, the standard and D2X profiles are shown in the dropdown box.
Have I missed something in the installation? Do the profiles have to be loaded somehow?
View 2 Replies
View Related
Sep 30, 2013
How to I get camera profiles into LR 4 and Camera Raw?
View 3 Replies
View Related
Jun 27, 2013
I have the student version of AutoCAD 2012 on an HP laptop with Windows 7 Home Premium OS. I originally installed AutoCAD in June of 2012. It worked fine for 9 or 10 months but now whenever I select File/Open, File/Save, or File/Save As, AutoCAD stops responding and the spinning blue donut appears. AutoCAD never comes back and I have to close it from Task Manager. I uninstalled AutoCAD and reinstalled it, and the process went smoothly. However I still have exactly the same problem with the File operations. I apply Windows updates, but other than that have not made any changes to the software on the laptop. AutoCAD works fine for everything except the File operations. I am able to save with CTL/S and am able to open AutoCAD files from File Manager.
View 3 Replies
View Related
