Can't open file from Nikon D7100 in Camera RAW Plug-In,i have Photoshop CS5 and plugin is upgraded.Format NEF from Nikon D 7100 is not in this plug-in photoshop.
I am relatively new to Lightroom. I have imported Panasonic Lumix DMC-FZ200 raw (.RW2) files into Lightroom 5.3. When I go into the Develop module under the Camera Calibration the only profile that shows up is Adobe Standard. My camera is supported according to the Adobe web site.
I own a GoPro Hero 3 Black camera. I saw the Russell Brown demonstration of Camera RAW to correct lens distortion (
[URL].......
In this instruction, he takes images into Camera RAW and selects a tab called Profile, and it automatically detected the camera from metadata and made corrections.
I was sold, subscribed to Adobe Cloud, downloaded Photoshop and started following his tutorial. When I got to the lens correction part, my Camera RAW has no Profiles tab. Brown does say that you need the latest version, but I have assumed that since I just subscribed and downloaded, that I have that.
I have a 5d mark 2, and I created a custom camera profile that is ideal for me, however when I shoot raw it only gives me the adobe, and camera standards etc. Is there a way that I can take my user setting on my 5d and transfer it into lightroom?
I am using Photoshop Elements 11, using WIndows 7 Operating System. I have a new camera Canon Rebel T5i, and having problem viewing images in raw format (cr2).Message in PE11, states, "Camera model not supported by installed version of Camera raw."
Canon software views images. Suspect my minimum camera raw plug in version does not support this new camera..I am unable to locate in the software any menu item that allows me to view the camera raw plug in version.
Have no choices in the camera calibration tab inside camera raw plugin. Use CS3 and Raw 4.6. Are choices only available in later version or PS? Also in Raw preferences choice for camera serial number and also setting as defaults. Where to enter serial number etc.
my PSE11 was working fine until i bought a new camera and tried to upload photos from my RAW files. It gave me this message
"Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.Please visit the Camera Raw documentation for additional information."
so i tried to install the update.... installed it fine, kept getting the same message when i would try to open the photo. after researching online i found the suggestion of uninstalling and reinstalling photoshop elements. i did that once, tried the update again...same results. uninstalled again. tried the update again and still getting the same message. ive checked the adobe website and everywhere i look says the version of the camera raw DOES support my camera (nikon D7100).
After an, automatic, update to camera raw 7.3 in Photoshop Elements 11 all Camera Profiles are gone. All that is left is "Matrix". I use Elements 11, windows Vista on a 64-bit machine, my camera is a Nikon D7000.
I'm just beginning to work with Photoshop CS5. When I was editing with the camera raw features; I discovered that there had not been a "Lens Profile Correction" loaded for my Panasonic Lumix DMC-L10 with a Leica lens 14-150. I"m looking for a method to get this lens added to the Profile Connection.
I just bought me a new canon EOS 700D, the x-rite Colorchecker Passport and photoshop elements 11. I took a photo of the colorchecker (.CR2-raw file) and followed their instructions to make my own camera profile. Meaning I opened the .CR2-Raw file with Photoshop elements, didn't make any changes to it just directly saved it as a .DNG file. Opened it in the colorchecker software "Color Checker Passport", it recognized the colorchecker on the photo and so I pressed the button to make the profile and to save it. I then restarted Photoshop elements and opened the photo with the colorchecker on it again as a .CR2 raw file. In the instructions it now says change the camera profile to your just made profile, but when I scrolled down the profiles there were only the standard profiles "Adobe Standard, Camera faithfull, camera landscape" and so on. Mine was not there. So I checked the paths were my profile and the standard profiles are saved to. I then put my new profile into the same folder as the standard profiles for my camera, restarted PSE 11 (and the computer after a couple of tries) and tried again. Again my profile was not in the scroll down menu where it should be. I even reinstalled all the software concerned with this but it didn't work. My system is Windows 7 64 bit and photoshop elements 11 and X-Rite software are updated.
the .dcp camera profiles I make with the colorchecker software are only 2 kb big but the standard profiles are more like 200 kb.Additiv after reinstalling everything and updating again, the camera profile folder for my canon eos 700D is missing. The folder for teh newest model of that line is the 650D.
My camera is a Fujifilm X20. This profile is normally included in LR 5.3. But if I want to select it, it's only possible to select model Fujifilm FinePix X100 and profile Adobe (Fujifilm FinePix X100). How can I change this?
For some reason when using the path option in inventor studio for camera animation the camera rolls for no reason?? I have created two helical curve sketches around my product, the outer curve is the path for the camera and the inner curve is the path for the target. Both curves are the same height and have 1 revolution. When i play the camera it works out fine untill it hits 1/4 of the way through and suddenly flips 180 degrees so now the camera is upside down, once it hits 3/4 of the way it flips back again to the correct rotation. If i dont create an inner curve for the target and place the target directly in the centre of my product with no path to follow the camera spins all over the place when it follows the curve.
I don't know how to phrase it correctly but the 3d camera tracker inside of After Effects will only apply key frames to the null object. This causes the footage to rotate around itself.
I'm an amateur moving up to LR 3 and have been trying to learn this program by reading the LR3 book by Scott Kelby. He shows that the Camera Calibration feature has some settings for specific cameras yet the drop down menu has none listed. I've upgraded to 3.6 and the images were copied from raw to DNG.
I am working on a project where I am incorporating 3d text into a shot with an onscreen talent speaking to the camera. I am trying to get the text to only move when the camera moves such as a pan or a hand held shake, making it look like it's part of the environment. It will track with the camera and looks great until my talent /subject moves, then the text moves with the subject. What am I doing wrong in my tracking? I have looked up tutorials and articles searching for others who have had this problem and cannot find anything that replicates my issue. Every tutorial I've seen does the same thing with fantastic results but I can never get the text to not move with my subject.
I normally generate a new camera calibration profile by x-rite everythime I change the light settings. This gives rise to a lot of camera calibration profiles in LR5. How to erase them after use?
Created photo then used file menue, export preset, xrite. It worked but I never got a change to select a name. It came up as "profile". What am I missing. Found the profiles but my camera Cannon Rebel 4ti is not listed. Is there an easy way to change or delete these profiles?
Why does Lightroom 5 show "embedded" as an option for camera profile for .dng files created by my pentax k-30? I thought that "embedded" profiles did not apply to .dng files?
I've just purchased a Pentax K-5 but when I import .DNG files from this camera into LR 3.6 there is only Adobe Standard and Embedded as options in Camera Calibration. I checked the release notes and the Pentax K-5 was supposed to be supported in Camera RAW 6.3. I looked in the relevant folder and I can see profiles for other Pentax cameras but not the K-5.
I'm shooting with a Nikon D3s and always had the problem that the imported photos went a few stops darker when they were imported in Lightroom. I figured out that I get better results when I change the camera profile from Adobe Standard to Camera Neutral (which probably equals my setting on my camera)
So how can change this setting for the rest of my already imported stock and how can make this the default setting for my future photo imports?
I would like to be able to see camera profile in Loupe Info. This would support me choose between versions of a photo that have different profiles applied.
I have not been able to find any indication that this is possible in LR 4. I am still using LR 3.6.
Beyond that, it would be nice to be able to select any information to see in Loupe Info and not be restricted to the fixed list of items currently available.
I created a colorchecker passport profile for my new OMD EM1 camera and it doesn't show up in the list of camera profiles. At least one other person I know with this camera is reporting the same issue. I am on a brand new download of Lightroom 5.2.
I have Lightroom 4.3 and a Canon 6D. I cannot get Lightroom to display my Camera Calibration Profile when I am developing a raw file.
I have dug through the MAC Library and Application Support folder and found CameraRaw. That folder contains my listed cameras. But when I am in Lightroom, I do not see that profile in the Camera Calibration section.
Is there a way to force Lightroom to display my camera profile? Lightroom 2 used to display it.
I opened up some photos to edit this evening, and have discovered that the camera profile options are gone. All that is available are the two ACR ones. I shot with the same camera and lens as I have before (Nikon D40 and 50mm), and I double checked, and I shot everything in RAW. I don't know what's going on. I'm running Windows 7 64 bit, and have LR 3.6. I would really like to use Camera Standard and Camera Vivid.
