I've just purchased a Pentax K-5 but when I import .DNG files from this camera into LR 3.6 there is only Adobe Standard and Embedded as options in Camera Calibration. I checked the release notes and the Pentax K-5 was supposed to be supported in Camera RAW 6.3. I looked in the relevant folder and I can see profiles for other Pentax cameras but not the K-5.
View 4 Replies
Is it anticipated that Adobe Camera DNG and earlier versions of Lightroom will support Pentax K-3 PEF files?
View 8 Replies View Relatedwhere to get the plug-in to use the auto lens profile correction in Lightroom for the above stated lens? Adobe only have the older 18-250, and even on the new 5.3 LR version, still have not supplied the plug-in for this lens!
View 1 Replies View RelatedI am relatively new to Lightroom. I have imported Panasonic Lumix DMC-FZ200 raw (.RW2) files into Lightroom 5.3. When I go into the Develop module under the Camera Calibration the only profile that shows up is Adobe Standard. My camera is supported according to the Adobe web site.
View 2 Replies View RelatedIn Development module in LR4.4, viewing a Fuji X100s raw file (converted on import to DNG) I tick the box for "Enable Profile Corrections" under "Lens Corrections," and select "Auto" from the "Setup" menu. I would have thought that LR would pick up the X100s profile, but no, nothing happens. If I choose "Fujifilm" from the "Make" dropdown, I can find the X100 (not X100s) profile manually. The profile's probably pretty similar, but still, I'm wondering why my install of 4.4 doesn't have the X100s profile in place?
While I'm at it, I'll ask this too -- I recently bought the new Nikkor 35mm 1.8G ED (the new full frame 35mm Nikon lens, not the trusty 35mm 1.8DX) and there's no profile for that lens in my LR4.4 either.
Finally, I note that when I choose "Check for Updates" from the "Help" menu in LR, I'm told there are no updates available.
How do i find camera proflies in lightroom 3.6.
I have Nikon D300s
My camera is a Fujifilm X20. This profile is normally included in LR 5.3. But if I want to select it, it's only possible to select model Fujifilm FinePix X100 and profile Adobe (Fujifilm FinePix X100). How can I change this?
View 3 Replies View RelatedIt's too bad that a profile has not been added to Lightroom 4 by Adobe for the Canon G1X, a great camera that's been out for awhile.
Can it be put into Lightroom 5 at least?
I have a 5d mark 2, and I created a custom camera profile that is ideal for me, however when I shoot raw it only gives me the adobe, and camera standards etc. Is there a way that I can take my user setting on my 5d and transfer it into lightroom?
View 1 Replies View RelatedI have been using Lightroom 5 happily for several months with no problems. A few weeks ago, I started getting the message at the import screen that previews were not available. This was OK, I just guessed on which I needed to import.
Starting last week, I cannot import files from either of my cameras. On the import screen, when it is trying to find files, it just hangs up. Have let it go for half an hour and nothing. When I click "cancel", I get the message that Lightroom has encountered a problem and needs to close.
I have tried purging the cache, though I'm not sure it is working, as I never get any message that the purge has been successfully completed. I click the button and nothing happens. I have tried starting a new catalog in case my other one is too big (approx 14,000 images), but same problem. I have tried installing the beta 5.2 version, still same problem.
I would love a solution to this, as for now I am having to import the NEF files by just dragging them to a folder on my desktop, and then importing the files from that folder into lightroom (when importing from folders on the computer, I have no problems).
Why is Adobe Standard the only profile choice in Lightroom for a Lumix fz150?
View 2 Replies View RelatedI normally generate a new camera calibration profile by x-rite everythime I change the light settings. This gives rise to a lot of camera calibration profiles in LR5. How to erase them after use?
View 2 Replies View RelatedCreated photo then used file menue, export preset, xrite. It worked but I never got a change to select a name. It came up as "profile". What am I missing. Found the profiles but my camera Cannon Rebel 4ti is not listed. Is there an easy way to change or delete these profiles?
View 6 Replies View RelatedWhy does Lightroom 5 show "embedded" as an option for camera profile for .dng files created by my pentax k-30? I thought that "embedded" profiles did not apply to .dng files?
View 7 Replies View RelatedI'm shooting with a Nikon D3s and always had the problem that the imported photos went a few stops darker when they were imported in Lightroom. I figured out that I get better results when I change the camera profile from Adobe Standard to Camera Neutral (which probably equals my setting on my camera)
So how can change this setting for the rest of my already imported stock and how can make this the default setting for my future photo imports?
I would like to be able to see camera profile in Loupe Info. This would support me choose between versions of a photo that have different profiles applied.
I have not been able to find any indication that this is possible in LR 4. I am still using LR 3.6.
Beyond that, it would be nice to be able to select any information to see in Loupe Info and not be restricted to the fixed list of items currently available.
I have a Fuji XE-1 camera and was pleased to see that this camera is listed as supported in ACR 7.4. However when I installed ACR 7.4 I cold not find the profile for my Fuji XE-1 in either Lightrrom 4 (or 5 Beta) or Photoshop CS6. I can find a profile for my old camera a Fuji X100 but not the new one.. I also use the standard Kit lens with this camera, the 18-55mm OIS F2.8-4 lens and it is not lsted either. Am I doing something wrong as I look for it under camera profiles. Is their a way to load them into ACR from an external website or are they "baked into" ACR 7.4?
I am using an iMac withg the latest version of Photoshop CS6, Lightroom 4 and OSX 10.8.3
I do not find the profile of my lens(Sony/zeiss vario sonnar T F 1,8) in lightroom 5.2 when correcting for lensdistortion. Another lensprofile also from Zeiss comes up (Zeiss Apo sonnar T 2/135 ZE).Is it a similar lens and should I then use it?
View 2 Replies View RelatedI have installed Blurb´s color profile but Lightroom doesn´t show it in its list Choose profile.
I want to see how my pictures most likely will look in the book I will make at Blurb´s, so I need to use Blurb´s color profile.
Lightroom and Blurb is said to cooperate!
When I open a photo and try use the lens profile option. It only find my one wrong lens profile.
My lens is TAMRON 18-270mm F3.5-6.3 and in "progmdata -> adobe ->CamereRaw ->lensprofile" directory the lens profile is there Together with another 19 items.
But in LR when I open the lens profile and choose tamron, It automatically selects a wrong lens, when I try to choose a different lens It shows only the wrong lens (where is all the 19 lenses??), How can I fixed it that I could choose my lens?
I am runing LR 5.3 and PS6 on Win 7 Ultimate with latest updates as of 2/17/2014. Some of my DNG from the Pentax K5 IIs are not importing or displaying correctly. I have attached screenshots from LR/PS and Silkypix (Pentax Util) for comparison.
View 10 Replies View RelatedIt worked when I first updated Lr to latest version (5,3) but for some reason it's not showing thumbnails anymore when importing pictures from SDCard. I tried re installing with no success.
I don't know where to look for, I am under MAC OS Lion - 10.7 -
Can I load a specific camera/lens profile into LR and if so how?
View 1 Replies View RelatedI created a colorchecker passport profile for my new OMD EM1 camera and it doesn't show up in the list of camera profiles. At least one other person I know with this camera is reporting the same issue. I am on a brand new download of Lightroom 5.2.
View 2 Replies View RelatedI have Lightroom 4.3 and a Canon 6D. I cannot get Lightroom to display my Camera Calibration Profile when I am developing a raw file.
I have dug through the MAC Library and Application Support folder and found CameraRaw. That folder contains my listed cameras. But when I am in Lightroom, I do not see that profile in the Camera Calibration section.
Is there a way to force Lightroom to display my camera profile? Lightroom 2 used to display it.
I opened up some photos to edit this evening, and have discovered that the camera profile options are gone. All that is available are the two ACR ones. I shot with the same camera and lens as I have before (Nikon D40 and 50mm), and I double checked, and I shot everything in RAW. I don't know what's going on. I'm running Windows 7 64 bit, and have LR 3.6. I would really like to use Camera Standard and Camera Vivid.
View 2 Replies View RelatedI have a Canon S100 which is one of the 6 new cameras added to LR. My existing LR would not open the CR2 file. This 3.6 RC opens it but does not list it as one of the canon cameras it profiles. How about the other 5 cameras? I don't have any of them so I can't comment. Only on the S100.
View 7 Replies View RelatedWhy can’t I find the color profile info in the library ? It’s sometimes necessary to convert to sRGB for some applications ( internet, some beamers in clubs,…). I convert them but afterwards it is nice to have the possibility to check this out and should be possible in lightroom, the info is present why not showing it ( it is not so easy to go in finder and look at it in info for every image)? Since I’m always working in Adobe profile for printing and so this is important to know !
View 10 Replies View RelatedI used Adobe lens profile creator to download a lens profile. I cannot find the file. It is not in the standard folder for lens profiles. Where does lens profile creator downloads the lcp file? It says local disk?
View 11 Replies View RelatedIs it just me or I don't have Pentax in Lens Correction tab in the Develop Module of LR4? How can I add it like it was in LR3?
View 11 Replies View RelatedI'm using Lightroom 5 and Photoshop CS5. The problem is that if I apply a custom camera color profile created by X-Rite Passport Color Checker, I can no longer use an external editor, such as Photoshop, to edit my photos. Before I apply the custom profile, the external editor function works just fine. If I apply a custom profile in the Camera Calibration panel, then the ability to use external editors no longer works. There is no error message, but nothing happens when I try to edit in an external editor. If I go back and turn off the custom profile and go back to Adobe Standard, then the external editor function works again. What is going on? Is there a way to make it possible to apply a custom profile in Camera Calibration and still be able to use the external editors?
View 9 Replies View Related
