where to get the plug-in to use the auto lens profile correction in Lightroom for the above stated lens? Adobe only have the older 18-250, and even on the new 5.3 LR version, still have not supplied the plug-in for this lens!
View 1 Replies
Is it just me or I don't have Pentax in Lens Correction tab in the Develop Module of LR4? How can I add it like it was in LR3?
View 11 Replies View RelatedUsing LR 3.5.1. When applying Lens Corrections/Profile/Enable in Default, my Sigma 10-20mm f/4-5.6 actual lens is being corrected by the profile for a Sigma 10-20mm f/3.5 lens. I can tell it's the wrong correction because the barrel distortion after using the default profile is not corrected, and when I manually select the 4-5.6 lens the correction is perfect. So I know the right data is embedded in the LR correction data bank but is not being used.
I found that when I set the profile Setup selector to "Auto" the correct lens is selected and the correction it makes is "correct." But then moving to the next photo it switches to Default again, selecting the wrong lens, and so has to be set to Auto for each photo. This action doesn't seem to me to me an expected result called "Setup." I need this for my home interior photography, and with hundreds of photos a week I don't want to manually operate this. This didn't happen until v.3.4 or 3.5, I think.
So, how do I get it to select the right lens as the Default, or get the Auto setting to stick? Either would do. (Seems to me they logically are the same thing).
In addition, why isn't it possible to have the profile itself enabled as a default perhaps in a preset - or is that possible and I don't know how to do it? In other words, once it's working right, why not make it an import preset for that lens?
I'm trying out the new Sigma 24-105 DG lens with my 5D M II. The lens profile is not yet in the list of Sigma lenses. I checked and my LR is up to date with the latest version 5.3. Is there a way to find the lens profile to import for LR lens correction function? Or do I just need to wait until LR updates for new lenses?
View 5 Replies View RelatedHow or where can I get the lens correction profile for the Canon 18-135 STM lens in Lightroom 5 ? In effect he is not available in my list of correction lens so my lightroom is up to date apparently.
View 2 Replies View RelatedHow or where can I get the lens correction profile for the new Canon STM lenses?
View 5 Replies View RelatedI would like to know how to add a lens to the lens correction profile in LR5. I would like to add my Canon 135f/2.
View 4 Replies View RelatedUnless it is hidden away in an area i've yet to discover, where the lens profile/correction module is hiding? Simple enough to enable in 3.5...alas, can't find it in 3.6.
View 3 Replies View RelatedWhat camera profile should or could I use for a Nikon Coolpix P510? There is no profile for that specific camera --- the only choice is a Coolpix P6000. My Nikon DSLR lens profiles are all there --- not the Coolpix.
The P510 has a 4.8-180mm f/3/3 - 5.9 lens; the P6000 profile uses a 6-24mm f/2.7-5.9 lens.
I refer to Lightroom version 3.6. I have purchased a panasonic-gx1 plus 14-42mm & 45-175mm lenses and would like to add the lens profiles to the lens correction module.
View 1 Replies View RelatedI have lightroom 4 and Canon Powershot S110 do I need a lens profile correction and if yes so from where would I get it?
View 2 Replies View RelatedI am using Photoshop CS6 on a PC running Win7. In the previous version I was able to save a profile in the Lens Correction panel. In this version I can find my camera and my lens but it won't let me save the profile. I only real estate and straight verticals are very important.
View 3 Replies View RelatedI can't find my lens in the Lens Correction menu. Is there a way to add it?
View 2 Replies View RelatedI'm just beginning to work with Photoshop CS5. When I was editing with the camera raw features; I discovered that there had not been a "Lens Profile Correction" loaded for my Panasonic Lumix DMC-L10 with a Leica lens 14-150. I"m looking for a method to get this lens added to the Profile Connection.
View 1 Replies View RelatedIn LR 4.4 lens correction profiles works fine for my Canon 70-200 f/4L IS USM, but when I use the Canon Extender 1.4 III with this lens there is no correction profile available.How do I obtain a profile covering this?
View 3 Replies View RelatedI'm unable to find a profile for my Canon 5D Mark III within the PS CS6 lens correction filter. In fact, Canon isn't even available as a camera make option within the Search Criteria box, nor are any canon lenses. When I click the Search Online button, the prompt reads "No online profiles found".
I have no problem within Light room 4 (the Mark III and lenses are recognized)-- however, I'd really like to be able to use the new Adaptive Wide Angle Lens filter within CS6, which needs the camera's EXIF data to function correctly. I'm using a new i Mac OS X.7
I've just purchased a Pentax K-5 but when I import .DNG files from this camera into LR 3.6 there is only Adobe Standard and Embedded as options in Camera Calibration. I checked the release notes and the Pentax K-5 was supposed to be supported in Camera RAW 6.3. I looked in the relevant folder and I can see profiles for other Pentax cameras but not the K-5.
View 4 Replies View RelatedIs there a way of setting the "Lens correction" in LR3 to be on by default? as it is now I have to se tit for each image.
View 4 Replies View RelatedWhen I try to use Lens Correction in LR 5 I get a restricted number of profiles, none of which match my standard Nikon 28-300mm zoom. However when I open the images in Camera Raw I have automatic access to this profile. I also have access to a custom Fuji profiles which I have downloaded and installed with Adobe Profile Downloader but which don't appear in the Lightroom module. Developing my images in Camera Raw before using Lightroom?
I had always assumed that Camera Raw formed the basis of Lightroom.
Is there a lens profile for Nikon 18-300mm lens?
View 1 Replies View RelatedIn Develop module I'm not able to see the Lens Correction menu. I am loading the 5.3 update.
View 2 Replies View RelatedIt was there before but now I cant find the "Lens Correction" area in the Develop Module of LR5. What i can do to activate it again?
View 2 Replies View RelatedI have upgraded to LR5 but cannot see Lens Correction tab in the Develop module.
View 2 Replies View Relatedif it's possible to set a default to "on" for the Enable Profile Corrections, and Remove Chromatic Abberation options in the basic panel under "Lens Corrections" in Lightroom 5, ?
And if not - can I make a plea to whoever decides these things that it really would be VERY useful to have it.
So, I've recently purchased Lightroom and love it. Only problem is adding lens profile to each photo. I worked out there is a bulk setting, but I use multiple Canon lenses, the 24-105, the 70-200 and 60mm Macro. If I apply lens correction in bulk to all images it will go by what's on the first image. Say for example the first image was taken with the 60mm it will apply that correction to all photos despite what lens they were taken with.
I went through the rest and unticked and reticked Canon and it selected the correct lens this time, but not in bulk. What is the correct way to set this to happen in bulk or is it not possible?
I have Lightroom 5.3 and the Lens Correction feature is not showing up in the Develop module. how to access this feature?
View 1 Replies View RelatedI would like to inform all about an (in my view) incorrect behaviour of LR:
In order to speed up my workflow i disable detail and lens corrections for all images immediately after the import (select all, auto sync is on, turn off detail and lens corrections). With this panels turned off I can do basic operations like cropping etc much, much quickier. I shoot badminton sport and have to process hundreds of images.After the basic corrections I re-enable detail and lens corrections for all images which should restore the previous settings of this panels or at least the default (ISO specific) settings (which is the same in my case). But the "Remove Chromatic Aberrations" remains off, even if it was on before and on by default for all my lenses! I consider this to be a bug.
Obviously LR seems to use some of the lens correction information it gets from Micro Four Thirds cameras. This shows when compared to results from RAW converters that don't.
I have noticed this for my Olympus OM-D and the 12-50 mm zoom. Is that the reason why there is no lens profile for that lens in Lightroom? And is this the case for all MFT lenses?
I want to check the "remove chromatic aberrations' box in the LR5 Develop mode, but the Lens Corrections Panel is missing from my Panel view.
how I han restore this option.
Is there a way to enable lens correction by default? I do not like having to check the box for each new picture I import.
View 2 Replies View RelatedI'm using Lr 4.1. I'm processing raw from a NEX 5 and a NEX 7. Under Lens Correction - Lens Profile - e50/1.8, e24/1.8z, and e18-200f/3.5-6.3 are not listed. I assume profiles for these lenses exist somewhere. Where I can download profiles for these lenses and tell me how to get them into Lr?
View 3 Replies View Related
