Lightroom :: Find Lens Profile To Import For LR Lens Correction Function
Mar 7, 2014
I'm trying out the new Sigma 24-105 DG lens with my 5D M II. The lens profile is not yet in the list of Sigma lenses. I checked and my LR is up to date with the latest version 5.3. Is there a way to find the lens profile to import for LR lens correction function? Or do I just need to wait until LR updates for new lenses?
Using LR 3.5.1. When applying Lens Corrections/Profile/Enable in Default, my Sigma 10-20mm f/4-5.6 actual lens is being corrected by the profile for a Sigma 10-20mm f/3.5 lens. I can tell it's the wrong correction because the barrel distortion after using the default profile is not corrected, and when I manually select the 4-5.6 lens the correction is perfect. So I know the right data is embedded in the LR correction data bank but is not being used.
I found that when I set the profile Setup selector to "Auto" the correct lens is selected and the correction it makes is "correct." But then moving to the next photo it switches to Default again, selecting the wrong lens, and so has to be set to Auto for each photo. This action doesn't seem to me to me an expected result called "Setup." I need this for my home interior photography, and with hundreds of photos a week I don't want to manually operate this. This didn't happen until v.3.4 or 3.5, I think.
So, how do I get it to select the right lens as the Default, or get the Auto setting to stick? Either would do. (Seems to me they logically are the same thing).
In addition, why isn't it possible to have the profile itself enabled as a default perhaps in a preset - or is that possible and I don't know how to do it? In other words, once it's working right, why not make it an import preset for that lens?
How or where can I get the lens correction profile for the Canon 18-135 STM lens in Lightroom 5 ? In effect he is not available in my list of correction lens so my lightroom is up to date apparently.
In LR 4.4 lens correction profiles works fine for my Canon 70-200 f/4L IS USM, but when I use the Canon Extender 1.4 III with this lens there is no correction profile available.How do I obtain a profile covering this?
where to get the plug-in to use the auto lens profile correction in Lightroom for the above stated lens? Adobe only have the older 18-250, and even on the new 5.3 LR version, still have not supplied the plug-in for this lens!
Unless it is hidden away in an area i've yet to discover, where the lens profile/correction module is hiding? Simple enough to enable in 3.5...alas, can't find it in 3.6.
What camera profile should or could I use for a Nikon Coolpix P510? There is no profile for that specific camera --- the only choice is a Coolpix P6000. My Nikon DSLR lens profiles are all there --- not the Coolpix.
The P510 has a 4.8-180mm f/3/3 - 5.9 lens; the P6000 profile uses a 6-24mm f/2.7-5.9 lens.
I refer to Lightroom version 3.6. I have purchased a panasonic-gx1 plus 14-42mm & 45-175mm lenses and would like to add the lens profiles to the lens correction module.
Rather than manually applying lens correction profiles to images by each time having to correct one image and then sync with the rest, I would like LR 5 to automatically apply the appropriate lens correction (either by EXIF info or "default" profile) when importing from the camera (card).
I do not find the profile of my lens(Sony/zeiss vario sonnar T F 1,8) in lightroom 5.2 when correcting for lensdistortion. Another lensprofile also from Zeiss comes up (Zeiss Apo sonnar T 2/135 ZE).Is it a similar lens and should I then use it?
When I open a photo and try use the lens profile option. It only find my one wrong lens profile.
My lens is TAMRON 18-270mm F3.5-6.3 and in "progmdata -> adobe ->CamereRaw ->lensprofile" directory the lens profile is there Together with another 19 items.
But in LR when I open the lens profile and choose tamron, It automatically selects a wrong lens, when I try to choose a different lens It shows only the wrong lens (where is all the 19 lenses??), How can I fixed it that I could choose my lens?
LightRoom and Camera Raw have profiles for Lens Correction and all the current available lens are in the list for the Canon 6D raw files. BUT the Filter/Lens Correction when in Photoshop CS6 only have 2 Tamron lens listed. Odd that there are lens profiles for the Canon 6D raw files in Lightroom and Camera RAW but not CS6 Filter/Lens Correction.
Camera RAW, LR and PS are up to date..... NOTE: I have a Canon 7D, G11 and 1D Mark II N and all their files work as expected. It's only RAW files created by the Canon 6D.
I am using lightroom 5 at work and shot some images with a canon 5d2 body with tamron 24-70 2.8 vc and tamron 70-200 2.8 vc lense. According to the note below, both lens are supported since lightroom 4.1. However I can not find the profile of these two lens on lightroom 5. How I can bring the profile back in?
I used Adobe lens profile creator to download a lens profile. I cannot find the file. It is not in the standard folder for lens profiles. Where does lens profile creator downloads the lcp file? It says local disk?
Why won't the Lens Correction filter recognize my camera and lens, which is shown in the metadata below the correction window? I had been using the venerable Canon 5D Mk II and now the Mk III. For images taken with the III it doesn't even list Canon in the Camera drop down -- too new? Even with the II, I had to choose the camera manually and then choose the lens from a very tedious list, and had no indication if it was using the focal length in the case of a zoom, or the aperture.
I do strongly prefer to do this correction in Camera Raw or Lightroom, and realize it needs to be done on an uncropped image to be accurate. why even present it as an auto correction if it can't use the metadata? Why not just limit it to the manual correction?
As my camera is fairly "old", lightroom does not have a lens correction profile for it. I have created a lens correction profile with Adobe Lens Profile Creator. Now how can I import this profile in Lightroom?
I am using Photoshop CS6 on a PC running Win7. In the previous version I was able to save a profile in the Lens Correction panel. In this version I can find my camera and my lens but it won't let me save the profile. I only real estate and straight verticals are very important.
I'm just beginning to work with Photoshop CS5. When I was editing with the camera raw features; I discovered that there had not been a "Lens Profile Correction" loaded for my Panasonic Lumix DMC-L10 with a Leica lens 14-150. I"m looking for a method to get this lens added to the Profile Connection.
I'm unable to find a profile for my Canon 5D Mark III within the PS CS6 lens correction filter. In fact, Canon isn't even available as a camera make option within the Search Criteria box, nor are any canon lenses. When I click the Search Online button, the prompt reads "No online profiles found".
I have no problem within Light room 4 (the Mark III and lenses are recognized)-- however, I'd really like to be able to use the new Adaptive Wide Angle Lens filter within CS6, which needs the camera's EXIF data to function correctly. I'm using a new i Mac OS X.7
I have created default settings by serial number for my Canon Mark III 1ds which include enabled lens profile corrections. I then created a user preset with these default corrections. Next I imported a folder of RAW images shot with this same Canon camera with the user profile checked as part of the import. When I switch to the Develop module and check the Lens Corrections panel, I see that although it is checked for each file, the actual make, model and profile are not populated.
Is this a bug or am I overlooking something on import? I understand that in LR 4, you can apply specific lens and camera calibration profiles to camera serial numbers (noise reduction etc too).
MacPro 2.8 Ghz Quad-Core Intel Xeon with 16 gigs of ram running OSX 10.7.2.
When I try to use Lens Correction in LR 5 I get a restricted number of profiles, none of which match my standard Nikon 28-300mm zoom. However when I open the images in Camera Raw I have automatic access to this profile. I also have access to a custom Fuji profiles which I have downloaded and installed with Adobe Profile Downloader but which don't appear in the Lightroom module. Developing my images in Camera Raw before using Lightroom?
I had always assumed that Camera Raw formed the basis of Lightroom.