I would like to be able to see camera profile in Loupe Info. This would support me choose between versions of a photo that have different profiles applied.
I have not been able to find any indication that this is possible in LR 4. I am still using LR 3.6.
Beyond that, it would be nice to be able to select any information to see in Loupe Info and not be restricted to the fixed list of items currently available.
I am relatively new to Lightroom. I have imported Panasonic Lumix DMC-FZ200 raw (.RW2) files into Lightroom 5.3. When I go into the Develop module under the Camera Calibration the only profile that shows up is Adobe Standard. My camera is supported according to the Adobe web site.
View 2 Replies View RelatedWhy can’t I find the color profile info in the library ? It’s sometimes necessary to convert to sRGB for some applications ( internet, some beamers in clubs,…). I convert them but afterwards it is nice to have the possibility to check this out and should be possible in lightroom, the info is present why not showing it ( it is not so easy to go in finder and look at it in info for every image)? Since I’m always working in Adobe profile for printing and so this is important to know !
View 10 Replies View RelatedMy camera is a Fujifilm X20. This profile is normally included in LR 5.3. But if I want to select it, it's only possible to select model Fujifilm FinePix X100 and profile Adobe (Fujifilm FinePix X100). How can I change this?
View 3 Replies View RelatedIt's too bad that a profile has not been added to Lightroom 4 by Adobe for the Canon G1X, a great camera that's been out for awhile.
Can it be put into Lightroom 5 at least?
I have a 5d mark 2, and I created a custom camera profile that is ideal for me, however when I shoot raw it only gives me the adobe, and camera standards etc. Is there a way that I can take my user setting on my 5d and transfer it into lightroom?
View 1 Replies View RelatedWhy is Adobe Standard the only profile choice in Lightroom for a Lumix fz150?
View 2 Replies View RelatedI normally generate a new camera calibration profile by x-rite everythime I change the light settings. This gives rise to a lot of camera calibration profiles in LR5. How to erase them after use?
View 2 Replies View RelatedCreated photo then used file menue, export preset, xrite. It worked but I never got a change to select a name. It came up as "profile". What am I missing. Found the profiles but my camera Cannon Rebel 4ti is not listed. Is there an easy way to change or delete these profiles?
View 6 Replies View RelatedWhy does Lightroom 5 show "embedded" as an option for camera profile for .dng files created by my pentax k-30? I thought that "embedded" profiles did not apply to .dng files?
View 7 Replies View RelatedI've just purchased a Pentax K-5 but when I import .DNG files from this camera into LR 3.6 there is only Adobe Standard and Embedded as options in Camera Calibration. I checked the release notes and the Pentax K-5 was supposed to be supported in Camera RAW 6.3. I looked in the relevant folder and I can see profiles for other Pentax cameras but not the K-5.
View 4 Replies View RelatedI'm shooting with a Nikon D3s and always had the problem that the imported photos went a few stops darker when they were imported in Lightroom. I figured out that I get better results when I change the camera profile from Adobe Standard to Camera Neutral (which probably equals my setting on my camera)
So how can change this setting for the rest of my already imported stock and how can make this the default setting for my future photo imports?
Can I load a specific camera/lens profile into LR and if so how?
View 1 Replies View RelatedI created a colorchecker passport profile for my new OMD EM1 camera and it doesn't show up in the list of camera profiles. At least one other person I know with this camera is reporting the same issue. I am on a brand new download of Lightroom 5.2.
View 2 Replies View RelatedI have Lightroom 4.3 and a Canon 6D. I cannot get Lightroom to display my Camera Calibration Profile when I am developing a raw file.
I have dug through the MAC Library and Application Support folder and found CameraRaw. That folder contains my listed cameras. But when I am in Lightroom, I do not see that profile in the Camera Calibration section.
Is there a way to force Lightroom to display my camera profile? Lightroom 2 used to display it.
I opened up some photos to edit this evening, and have discovered that the camera profile options are gone. All that is available are the two ACR ones. I shot with the same camera and lens as I have before (Nikon D40 and 50mm), and I double checked, and I shot everything in RAW. I don't know what's going on. I'm running Windows 7 64 bit, and have LR 3.6. I would really like to use Camera Standard and Camera Vivid.
View 2 Replies View RelatedI have a Canon S100 which is one of the 6 new cameras added to LR. My existing LR would not open the CR2 file. This 3.6 RC opens it but does not list it as one of the canon cameras it profiles. How about the other 5 cameras? I don't have any of them so I can't comment. Only on the S100.
View 7 Replies View RelatedI'm using Lightroom 5 and Photoshop CS5. The problem is that if I apply a custom camera color profile created by X-Rite Passport Color Checker, I can no longer use an external editor, such as Photoshop, to edit my photos. Before I apply the custom profile, the external editor function works just fine. If I apply a custom profile in the Camera Calibration panel, then the ability to use external editors no longer works. There is no error message, but nothing happens when I try to edit in an external editor. If I go back and turn off the custom profile and go back to Adobe Standard, then the external editor function works again. What is going on? Is there a way to make it possible to apply a custom profile in Camera Calibration and still be able to use the external editors?
View 9 Replies View RelatedI refer to Lightroom version 3.6. I have purchased a panasonic-gx1 plus 14-42mm & 45-175mm lenses and would like to add the lens profiles to the lens correction module.
View 1 Replies View Relatedhow to change the default settings in Camera Calibration (ALT changes the Reset to Set Default) and from what I can find, any newly imported RAWs will have these defaults applied. how do I apply these defaults to images already imported?
Also, what I specifically want to change is the Profile: Adobe Standard to Profile:Camera Landscape (for example) and apply that to all the images I already have shot with this specific camera body. So, two questions: Does setting the defaults include the Profile or is it only the "Shadows, Primary Red, Green, Blue" that gets saved as a new default and can these changes only be applied to newly imported RAWs?
Why is the Nikon P7700 not listed in the camera profile dirctory of Lightroom 4.2, and not selectable in calibration menu?
View 11 Replies View RelatedHow do i remove unwanted profiles from the profile menu in camera calibration
View 3 Replies View RelatedI have created custom profiles using Color Checker Passport for sunny, cloudy, flash, tungsten etc but would really like to create one for most shoots. I thought it would be a good idea to name it say "Temp" and overwrite each time so that I dont end up knee deep in camera profiles. But I am guessing if I do this will the latest saved version of "Temp" change the camera profile of all other previously saved versions of "Temp" from other shoots?It would be good if the saved version of "Temp" resided within the folder of that particular shoot only.
View 27 Replies View RelatedRunning Lightroom 4.3 on my Mac, I have my D600 set to shoot using "Camera Neutral" profile. However, upon import into LR, for some reason, it changes to "Adobe Standard" profile. I can change it to camera neutral, but it's difficult.
View 1 Replies View RelatedFacts - MacPro with 16gb ram and latest OS X. When i import images 1:1 previews are generated. My preferences file says to never get rid of 1:1's and I have a 90gb cache file. Using 2 - 24" monitors.
Question:Grid view in one display and the other shows loupe view. When click on loupe view on second monitor to go to 1:1 it can take 15 seconds (D800 files) for the 1:1 loupe view to show. What is weird is that if I go to an image in grid (second monitor off) and go to the menus and build a 1:1 preview then when I open loupe on the second miniotr and go to 1:1 it is immediate with no waiting.
Added later Have instructed LR to build 1:1 previews on a group of files. After doing this the 1:1 loupe view is immediate. For those images that were not yet rendered took time to show 1:1 in loupe.
I rerally do not understand how this is happening since 1:1s were rendered at import. Evbidently the import 1:1s have been removed - but why?
Can't open file from Nikon D7100 in Camera RAW Plug-In,i have Photoshop CS5 and plugin is upgraded.Format NEF from Nikon D 7100 is not in this plug-in photoshop.
View 2 Replies View RelatedI don't know what happened. Initially everything seems fine. Then when I use loupe view to see video, the view only shows the left top corner (about 60% of the length and height). And I can't change (zoom out) back to show the whole video.
View 1 Replies View RelatedThe panel in library mode where i could chose between loupe, grid, compare en survy and the thumbnailslider is gone. It was undeneath the import and export tab and over the filmstrip. Where can i find it and put it back?
View 2 Replies View RelatedLR4.4 Does not render some images (dng) in Loupe view but renders OK in Develop view.
View 2 Replies View RelatedIn Library, my icons for loupe and grid modes disappeared. How to get them back?
View 1 Replies View RelatedI have noticed this as an occasional random ongoing problem in Lightroom and just encountered it again in LR 5, running on Win 7 64 on a 30" 2560x1600 monitor. While the develop view renders properly, the louple view is very soft. Here is an example:
1:1 from Develop
1:1 from loupe
There is no indication that you need to wait for the final rendering and the image never gets sharper. Zooming in and out does not fix the rendering in loupe view. Resizing the lightroom window to a smaller size does not work. Rebuilding 1:1 previews does not work.
The only thing that works is to close and reopen Lightroom. It appears that some flag in the program instructing the loupe rerender sometimes does not get set.
This is a serious problem because a user could easily decide to delete an image based on the loupe view. This has forced me to preview all my images in PhotoMechanic. I simply cannot rely on Lightroom.
This is a difficult problem to reproduce as it seems to happen randomly. In a search and based on recollection, the zoom in and out seemed to fix.