The panel in library mode where i could chose between loupe, grid, compare en survy and the thumbnailslider is gone. It was undeneath the import and export tab and over the filmstrip. Where can i find it and put it back?
View 2 RepliesIn Library, my icons for loupe and grid modes disappeared. How to get them back?
View 1 Replies View RelatedHaving a screen flicker problem since 5.cRC came out, but only in Library/Grid mode when scrolling or selecting from the grid. But only when there are more images than can fit on one page in the grid.Seems to use an unusually low amount of memory with nothing else running on the system.
View 6 Replies View RelatedI used to be able to highlight several images in the Library Grid mode, type in a Metadata Label, and that label would be applied to all of the images. Doesn't work any longer. What am I missing? Doesn't work for Keywords either.
View 2 Replies View Relatedis there a way to do this. darkening filename info in grid mode?
View 4 Replies View RelatedI have a user and when he's in sketch mode he trys to draw a line but it keeps on snapping to a grid. Both snap and grid setting are switched off. I can't find any settings he has different from my own set-up so I'm finding it hard to fox this problem. FYI, this user is a bit of a problem and tends to change settings without even realising he's doing it.
He's using Inventor 2012.
Facts - MacPro with 16gb ram and latest OS X. When i import images 1:1 previews are generated. My preferences file says to never get rid of 1:1's and I have a 90gb cache file. Using 2 - 24" monitors.
Question:Grid view in one display and the other shows loupe view. When click on loupe view on second monitor to go to 1:1 it can take 15 seconds (D800 files) for the 1:1 loupe view to show. What is weird is that if I go to an image in grid (second monitor off) and go to the menus and build a 1:1 preview then when I open loupe on the second miniotr and go to 1:1 it is immediate with no waiting.
Added later Have instructed LR to build 1:1 previews on a group of files. After doing this the 1:1 loupe view is immediate. For those images that were not yet rendered took time to show 1:1 in loupe.
I rerally do not understand how this is happening since 1:1s were rendered at import. Evbidently the import 1:1s have been removed - but why?
I don't know what happened. Initially everything seems fine. Then when I use loupe view to see video, the view only shows the left top corner (about 60% of the length and height). And I can't change (zoom out) back to show the whole video.
View 1 Replies View RelatedLR4.4 Does not render some images (dng) in Loupe view but renders OK in Develop view.
View 2 Replies View RelatedI would like to be able to see camera profile in Loupe Info. This would support me choose between versions of a photo that have different profiles applied.
I have not been able to find any indication that this is possible in LR 4. I am still using LR 3.6.
Beyond that, it would be nice to be able to select any information to see in Loupe Info and not be restricted to the fixed list of items currently available.
I have noticed this as an occasional random ongoing problem in Lightroom and just encountered it again in LR 5, running on Win 7 64 on a 30" 2560x1600 monitor. While the develop view renders properly, the louple view is very soft. Here is an example:
1:1 from Develop
1:1 from loupe
There is no indication that you need to wait for the final rendering and the image never gets sharper. Zooming in and out does not fix the rendering in loupe view. Resizing the lightroom window to a smaller size does not work. Rebuilding 1:1 previews does not work.
The only thing that works is to close and reopen Lightroom. It appears that some flag in the program instructing the loupe rerender sometimes does not get set.
This is a serious problem because a user could easily decide to delete an image based on the loupe view. This has forced me to preview all my images in PhotoMechanic. I simply cannot rely on Lightroom.
This is a difficult problem to reproduce as it seems to happen randomly. In a search and based on recollection, the zoom in and out seemed to fix.
I see the file number come up in upper left when in Loupe view. This is nice. Today I was projecting for clients and the file numbers did not come up for a while and I was getting flustered. Finally, they did start appearing. What is the rhyme or reason is this?
View 2 Replies View RelatedI've been tethering to Capture One with a Phase Back then having Lightroom Autoimport the files which works well. The biggest problem I have is that when I want to check focus as I go along and I zoom in on the files in loupe view Lightroom is really slow at rendering up the image. It seems to get slower as the catalogue fills up until it just wont do it. Then if I quit Lightroom and restart its better for a while then slows down again.
Both applications are running on the same Macbook Pro with The latest OSX.
However looking through the files in Capture One they zoom up in size with hardly any delay. I understand that Lightroom has to render a larger preview which is taking the time but surely Capture One has to do this too but doesn't seem to need to take anywhere near as much time to do it. In the case of Capture One it seems to be able to zoom into files that it hasn't previously loaded so there must not be a pre existing preview there.
I used to be able to double click on an image in Loupe view in Library mode and I would zoom into that image. I think that stopped when I got to LR5, I'm in 5.3 now. Now when I double click in Loupe view, I'm back out to grid view. Drop down menu suggests I just need to hit return, same thing happens. This happens at all zoom levels fit, fill, 1:1, etc. I'm running OSX 10.9.2. Sounds like a setting issue, but I've looked.
View 1 Replies View RelatedWhen i use lightroom on 2 monitors i look mostly at the loupe view on the second monitor to judge or cull my pictures. I can see the resultant stars, colors and reject flags on the grid view on the primary monitor. but i cant see the ratings on the loupe view. I sometimes get confused as to whether i actually rated or color coded a particular photo in a similar series, but i have to look back at the primary monitor to make sure. Am I missing something? Is there some way to have a large view of the picture but include rating info on the same screen?
View 2 Replies View RelatedWhen I am capturing images in LR4 from a CF card or camera I want to enlarge individual photos in loupe view to check for focus, etc. I am talking about the time PRIOR TO IMPORT. Some of my images will enlarge with no problem but some images become completel pixilated when I try to Zoom in. This does not happen when I try to import from the hard drive. Is this normal. My render preview is set to Standard.
View 9 Replies View RelatedJust downloaded LR 5 and noticed that I cannot jump back from a Publish Service folder preview to a different folder preview in grid mode. The only way to view photos in another folder is to restart LR 5. This only happens when I am viewing photos in a Publish Service such as Flickr.
I updated from LR 4 using Creative Cloud installer.
I can not get the cursor to snap to the grid in any size of grid.
Object snap works just fine.
I know I did something wrong, but what?
AC 12 Lt
If you create a symbol that is pixel perfect, exit out of the symbol and go back in, the pixels bleed into each other because the pixel grid is not aligned correctly. Instead it is aligned to the global document grid which the symbol content is not placed in. It makes no sense to align the pixel grid to the global coordinates when the content by definition is not present in it.
This makes it impossible to use symbols to edit pixel perfect objects because any editing other than the original creation does not display pixels but pixel bleeds.
This is a valid bug in Illustrator CS6. Please specify:
1. Do you understand what I am specifying? If you do not I will provide images as I wish to resolve this functionality.
2. Specify if it has been fixed in Illustrator CC. I do not have an available Win7 installation to test CC but if it is I will acquire one.
The loupe view on the second screen used to display information about the photo. I double clicked on it and it disappeared and no matter what I do I can't seem to get it back.
On the primary screen this can be added/removed or changed in Library Module by selecting the menu view->view options... which gets you to a settings window where you can set what shows. However, I cannot seem to find a similar thing for the second monitor.
This may be related to other imported catalog bugs, but does not seem to be quite the same. In Lightroom 4, with an upgraded Lightroom 3 catalog:
1. Select a photo in Library mode.
2. Click on Develop to go to Develop mode
Screen shows "No photo selected". I cannot edit photos in Develop mode.
I can see and edit photos that are found in smart collections, but not photos that are simply in my collections from 2012, 2011, etc. folders
When I click in the preview panel, the arrow does not change to a + and I an not able to get a loupe.
View 2 Replies View RelatedMy PS 5.6, Ver 12.1, 64 bit doesn't show the unsharp mask loupe area of image, everything else with the program appears OK, is there a known problem?
View 6 Replies View RelatedRevit has a propensity to locate a lay-in ceiling grid with a grid intersection in the center of the room. You can use the alignment tool to align the grid with a wall. But I see no way to center a tile in a room. This is often a necessity in a narrow room, to keep the lights centered. Also, installers, when not given specific instructions to the contrary, will often locate the ceiling grid to minimize narrow tiles at the wall. We need more control over the position of the grid.
View 1 Replies View RelatedWhen i pick points from the drawing using the ID command i recieve a long and meaningless coordinate which is useless to me when setting out. How i can rotate my drawing so that firstly its aligned with my grid and secondly give it the same coordinates as my site based local coordinated grid?
View 9 Replies View RelatedWhen using the perspective grid tool and type, I have a word on the right side of the grid in perspective, and I want to make a shadow of this word flat on the bottom grid. (Like how a tall building casts a shadow flat on the ground)
I tried using the shear tool to do it but it is a bit tricky getting it just right. There must be an easier way to do it within the perspective tool grid.
When I type the word and align it to the bottom grid, how do I rotate it whilst still being aligned in perspective on the bottom grid?If I try and rotate the word using the selection tool it rotates off axis so it is no longer laying flat on the bottom grid.
Words placed on the bottom grid always read from the left vanishing point - I want the word to read from the right vanishing point so it aligns with my word on the right grid wall.
Understanding that composite volumes are typically more accurate, I have a reason to evaluate the volume between two surfaces via a grid volume. Easily created a grid volume surface using a 50' grid (50' is large for this site, but wanted to get a feel for calculation time).
Question: Can you change the grid size without creating a new grid surface? Ultimately I woud like to explore the difference in volumes based on grid sizing without creating a long list of surfaces. One would expect that you could chage the grid spacing in surface properties, but the values are non-editable.
I was working on some isometric drawings for my CAD class and I can't seem to figure out how to get the grid back to the standard 2D grid view that I used to get when opening CAD. I now jusr get this dotted grid every time:
[URL]...
I'm looking for an option to adjust the grid size and to snap-to-grid.
For some purposes, you can find a way around this, but it is a pain when working on a project that requires perfect precision.
The topic has been brought up before, but I'm hoping to hear of any news on the possibility of implementing it. I don't assume there has been made any plugins to cater this need since earlier posts on the matter, so I'm hoping to persuade developers to implement the feature in a new version of paint.net instead.
If you need to know more specifically what I'm looking for, then it's basically what you have in Adobe Illustrator or any decent 3D modelling software you will ever come across. It would work pretty much exactly like the grid already in place, except you would not be limited to working only with individual pixels, but rather groups of pixels as you zoom further out. The grid would preferably have thicker lines every 5, 10 or 15 lines, etc. for user to position the various elements.
I'm using Paint.NET 3.5.8 on Windows 7 SP1 64-bit.
While editing small (16 x 16) images, I noticed that Paint.NET used a grid with a width of 2 pixels. Selection rectangles snap to this grid, as do paste operations.
How can I specify the grid width or disable this snap to grid effect altogether?
want to translate my vector illustrations to charts for cross stitch kits. Using the grid tool, but the lines aren't equally spaced? I have a 100cm x 100cm document at the moment, with 1 cm making a 'stitch'. I want a grid that is 100cm x 100cm, made up of 1cm x 1cm squares for simplicity. Then be able to print the design out on the grid.
View 4 Replies View Related