Lightroom :: Change View Options In Loupe View On Second Screen?
May 28, 2012
The loupe view on the second screen used to display information about the photo. I double clicked on it and it disappeared and no matter what I do I can't seem to get it back.
On the primary screen this can be added/removed or changed in Library Module by selecting the menu view->view options... which gets you to a settings window where you can set what shows. However, I cannot seem to find a similar thing for the second monitor.
View 1 Replies
ADVERTISEMENT
Jan 13, 2012
I don't know what happened. Initially everything seems fine. Then when I use loupe view to see video, the view only shows the left top corner (about 60% of the length and height). And I can't change (zoom out) back to show the whole video.
View 1 Replies
View Related
Apr 16, 2013
LR4.4 Does not render some images (dng) in Loupe view but renders OK in Develop view.
View 2 Replies
View Related
Jun 30, 2013
I have noticed this as an occasional random ongoing problem in Lightroom and just encountered it again in LR 5, running on Win 7 64 on a 30" 2560x1600 monitor. While the develop view renders properly, the louple view is very soft. Here is an example:
1:1 from Develop
1:1 from loupe
There is no indication that you need to wait for the final rendering and the image never gets sharper. Zooming in and out does not fix the rendering in loupe view. Resizing the lightroom window to a smaller size does not work. Rebuilding 1:1 previews does not work.
The only thing that works is to close and reopen Lightroom. It appears that some flag in the program instructing the loupe rerender sometimes does not get set.
This is a serious problem because a user could easily decide to delete an image based on the loupe view. This has forced me to preview all my images in PhotoMechanic. I simply cannot rely on Lightroom.
This is a difficult problem to reproduce as it seems to happen randomly. In a search and based on recollection, the zoom in and out seemed to fix.
View 14 Replies
View Related
Nov 18, 2012
I see the file number come up in upper left when in Loupe view. This is nice. Today I was projecting for clients and the file numbers did not come up for a while and I was getting flustered. Finally, they did start appearing. What is the rhyme or reason is this?
View 2 Replies
View Related
Feb 21, 2014
I've been tethering to Capture One with a Phase Back then having Lightroom Autoimport the files which works well. The biggest problem I have is that when I want to check focus as I go along and I zoom in on the files in loupe view Lightroom is really slow at rendering up the image. It seems to get slower as the catalogue fills up until it just wont do it. Then if I quit Lightroom and restart its better for a while then slows down again.
Both applications are running on the same Macbook Pro with The latest OSX.
However looking through the files in Capture One they zoom up in size with hardly any delay. I understand that Lightroom has to render a larger preview which is taking the time but surely Capture One has to do this too but doesn't seem to need to take anywhere near as much time to do it. In the case of Capture One it seems to be able to zoom into files that it hasn't previously loaded so there must not be a pre existing preview there.
View 2 Replies
View Related
Apr 5, 2014
I used to be able to double click on an image in Loupe view in Library mode and I would zoom into that image. I think that stopped when I got to LR5, I'm in 5.3 now. Now when I double click in Loupe view, I'm back out to grid view. Drop down menu suggests I just need to hit return, same thing happens. This happens at all zoom levels fit, fill, 1:1, etc. I'm running OSX 10.9.2. Sounds like a setting issue, but I've looked.
View 1 Replies
View Related
Oct 26, 2012
When i use lightroom on 2 monitors i look mostly at the loupe view on the second monitor to judge or cull my pictures. I can see the resultant stars, colors and reject flags on the grid view on the primary monitor. but i cant see the ratings on the loupe view. I sometimes get confused as to whether i actually rated or color coded a particular photo in a similar series, but i have to look back at the primary monitor to make sure. Am I missing something? Is there some way to have a large view of the picture but include rating info on the same screen?
View 2 Replies
View Related
Jan 19, 2013
When I am capturing images in LR4 from a CF card or camera I want to enlarge individual photos in loupe view to check for focus, etc. I am talking about the time PRIOR TO IMPORT. Some of my images will enlarge with no problem but some images become completel pixilated when I try to Zoom in. This does not happen when I try to import from the hard drive. Is this normal. My render preview is set to Standard.
View 9 Replies
View Related
Feb 13, 2012
What to change to change the view to the top of the screen for windows 7? Now the icons hard to see.Over Ribbon panela.
View 1 Replies
View Related
Dec 27, 2012
Where can I turn on options on an image and get the file size and type?
View 4 Replies
View Related
May 2, 2012
I'm having trouble with the secondary display (window, in my case; only one monitor). When I first open the secondary display, either with a keyboard shortcut or by clicking, all is fabulous. The display modes (Grid, Loupe, Compare, Survey) are visible & clickable, as is thumbnail slider, file path. If I click or keyboard command to Loupe view, Normal, Live & Locked modes are available. However, if I close the window and then want to open it up later in my workflow, all of the aforementioned functions disappear. I'm able to bring up the Filter view, and can technically still work off the menu bar (and keyboard shortcuts, if remembered). But only if I restart the program do the full set of functions become visible again. The arrows at top & bottom don't collapse/expand to show anything more than a black border where the display & mode options once were.
View 1 Replies
View Related
Mar 27, 2013
In the process of trying to find out how to name virtual copies I came across Julianne Kost's blog which explained it very well.
However, I can't find the rather useful option of showing "copy name or file name" but rather just "copy name" or "file name" on their own. Since I'm using LR3 (Mac), is this a feature available only in LR4 or am I doing something wrong?
View 4 Replies
View Related
Mar 27, 2014
How am I able to view the LR5 module full screen? It only covers 2/3 of the screen.
View 3 Replies
View Related
Feb 12, 2006
When I'm working in PS CS and open a folder of pictures it always reverts to List view even though I exited last time in Thumbnail view. How can I set it to open in Thumbnail view by default?
View 2 Replies
View Related
Jun 18, 2012
I am working with a seris of 3d views that I want o make bigger. How can I do this.
I want to keep the view the same but changed the "scale" of the view/perspective
View 2 Replies
View Related
Jan 25, 2014
Is there a way to view the file name of a photo when using full screen mode in Lighroom? I am using version 5.3.
View 7 Replies
View Related
Jan 24, 2014
I am having problems getting my final prints to match the screen view. Most recently I have had this problem: I have an image that is sized to 5X7. I have it on a 5X7 template in the print module of Lightroom. The image dimensions in Lightroom say 5X7. I print on 5X7 paper (I actually measured it to be sure). ON the screen they look perfect, match the the templates and measure out fime with the onscreen rulers. Without fail a portion of the print is cut off on the final print. The long side of the print is the most effected. This is not just limited to 5X7's, it happens across the board. Is this a common problem or I am I doing something wrong? In the 5X7 example above the print comes out 5.2 X 7.3 give or take. I am using Lightroom 5.3 on an iMac running OS 10.9.1. The printer is a Canon Pro 100.
View 5 Replies
View Related
Dec 28, 2013
The grid view will not change size - why not?
View 13 Replies
View Related
Jul 9, 2012
In Ken LaRue's demo (see attachment B), theres a lot more option for you to tinker with in CFX.mine (see attachment A) only stops at 'timing' option. what do i need to do to view the rest of it?
and because i cant view the rest of the option, i can't change CFX schematic view to Action schematic view.
View 2 Replies
View Related
Dec 27, 2012
I am detailing a drawing with typical hole dimensions on a piece of steel angle. The drawing is setup such that the fabricator will have two options for each end of the steel angle. I have created two parts with the two options per end and have placed them outside of the page for reference.
I would like to reference each end of each piece, so that there are four pairs of views on the page (the two legs of the angle at each of the four ends), aligned in a grid. I have determined the best way to do this is with detail views. (Using breaks causes the break sign to appear huge, given the large gap I want between views. Using cropped views does not make it obvious that each end is a cutaway.)
My issue now is aligning the eight views. I know of the align options (horizontal, vertical, and in position), but they align to the "origin" of each detail, which is the center. With the angles being the same size, this works fine horizontally, but vertically, the pieces will never line up exactly, which is crucial to at least lining up the two legs of a single angle. The best I seem to be able to do is get the detail sizes as close to exact as possible so the centers come close to lining up. Even creating a projected view from a detail treats the cutaway end as part of the geometry, making it look a bit ridiculous.
way to precisely line up the views? I have done extensive searching and am confident that there is no inherent way to align based on a point or edge (seems like a deficiency on Autodesk's part), but is there a way to move the origin of a detail or something like that?
View 4 Replies
View Related
Jan 23, 2006
specific settings for a filter (Brush Strokes to be exact) but I cannot view the entire window.
View 5 Replies
View Related
Jan 30, 2013
While creating a drawing yesterday, I noticed that the RMB Options to modify a detail view has disappeared?
- Cutout Shape
- Detail Boundry
- Connecting line
I am not sure how long this has been like this, What I do know is that I had a corrupt model, (Broke when it migrated to 2013) I restored from backup and tested the model in ver 2012.
I can not say if bouncing between the two versions of inventor has perhaps changed something, or of this option has not been available for a while?
Autodesk Product Design Suite Premium 2014 SP1 Build 222
Intel Core i7 (950@3.07GHz)
Windows 7x64 (Home) - 12GB Ram
Nvidia GeForce GTX 560 Ti (1Gig - Ver:331.65)
View 1 Replies
View Related
Jul 2, 2012
what the check box in the options for 'section view as uncut' does ? see attached screenshot.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 3 Replies
View Related
Feb 4, 2011
What is the command line procedure to restore or reset the preset Isometric views. e.g. SW Isometric, SE Isometric etc.
Just want to create a lisp to set these views but I need to know the command line input.
View 2 Replies
View Related
Mar 22, 2011
There are no "initial view" options on PDF export.
View 4 Replies
View Related
Jan 14, 2014
Recently I downloaded the PSE 9 program from a disk onto my new computer. When I opened it to use I am unable to find under "Organize" the "File", "Edit", "Find", "View", "Window" and "Help" on the upper bar/area. I uninstalled and reinstalled the program but still do not see those options. I'm just begining to learn about PSE 9, so am new to all this.
What am I missing or not doing exactly right that I'm have dificulty trying to view and use the above? I can start to use the program with photos download on my computer, camera or external hard drive.
View 1 Replies
View Related
Jun 6, 2013
In Inventor Professional 2014, under certain screen sizes (by lcd, not necessarily pixels), inventor will display a scrambled screen that makes it impossible to view the work to be done.
1. Radeon HD cards 5900, and 6900 series are doing this.
2. Nvidia Quadro FX 4800 is not doing this.
3. Simply adding a second open drawing, and having it display the tabs at the bottom, resolved the scrambling.
4. Only the drawing area is scrambled, not the menus, or Browers.
5. Reducing the program, or drawing window may fix the issue.
6. Templates have nothing to do with it.
7. Application options May have something to do with it, but I can't find which ones.
8. Cycling thru all hardware options has no effect.
9. Installing (clean) the latest video drivers has no effect. (even betas)
10. When the screen scrambled, dragging the main program window to undock it from monitor 2 to monitor 1 would cause Inventor to crash (most of the time).
My machine has been doing this since I installed 2014. My supervisors computer was not. Then when I imported the application options, it began to do so. I MUST resolve this issue today, without installing a bunch of new video cards.
View 4 Replies
View Related
Mar 20, 2013
After a support call, I've lowered the brightness on my imac OS 10.6.8 but the prints are darker than ever.
I've calibrated. The printer is an Epson 4900. Photoshop is managing the colors. I did not download the no color management app.
View 7 Replies
View Related
Oct 14, 2013
I suspect that there is no way to do this, but it seemed so logical....How can I rotate the actual view of a page in DRAW? I have these box designs that I get handed, done somewhere else on the planet, with changes to various panels that are shown as upside down or at 90 degrees to the original page. I have to squint and cough backwards to read them.
Of course, for text, I can do an edit, but usually the text has been converted to curves many revisions ago. I looked, but could find no option for simply rotating the view, which would solve the problem.Surely there is a view "object" that gets filtered through the various existing View options, meaning that a simple set of transforms should also be able to rotate the entire pageview.
I do know how to kludge it, by selecting ALL and then rotating everything around a center point, but it requires than everything be selectable, and I use layers a LOT, for keeping the background frozen, for example. So, to get to a simple view of a small section on some sideways box tab, I have to unlock everything, select everything, rotate, edit, and then rotate back again and relock all the locked layers. It would make life simpler to have rotation as an option in View. Unless there's a better way???(And, no, the monitor is even harder to twist around.)
View 1 Replies
View Related
Oct 17, 2012
I have read as many reviews of PSE11 as I can find but none have mentioned the Timeline, which I use every day. Does it still exist in PSE11? What about the full screen view and compare side by side view? Do they still exist. If they do, can you still see the image full-size by clicking on it in full screen view?
View 2 Replies
View Related
