want to translate my vector illustrations to charts for cross stitch kits. Using the grid tool, but the lines aren't equally spaced? I have a 100cm x 100cm document at the moment, with 1 cm making a 'stitch'. I want a grid that is 100cm x 100cm, made up of 1cm x 1cm squares for simplicity. Then be able to print the design out on the grid.
View 4 Replies
When using the perspective grid tool and type, I have a word on the right side of the grid in perspective, and I want to make a shadow of this word flat on the bottom grid. (Like how a tall building casts a shadow flat on the ground)
I tried using the shear tool to do it but it is a bit tricky getting it just right. There must be an easier way to do it within the perspective tool grid.
When I type the word and align it to the bottom grid, how do I rotate it whilst still being aligned in perspective on the bottom grid?If I try and rotate the word using the selection tool it rotates off axis so it is no longer laying flat on the bottom grid.
Words placed on the bottom grid always read from the left vanishing point - I want the word to read from the right vanishing point so it aligns with my word on the right grid wall.
What would the settings be to render a grid with six equal squares? I just can't figure it out.texture size 1024 x 1024.
View 3 Replies View RelatedI'm working on a sticker with a Big Ben style clock on it. I've created it using the 2-point perspective ability in Illustrator. Unfortunately, I've decided that I want it to feel "taller" than when I started, so I need to shift the perspective. However, when I use the Perspective Grid Tool and adjust the ground or horizon line, it only adjusts the grid, not the artwork. Is there a way to have the artwork adjust with the grid so that I can move the artwork around in 3D space to find the right perspective?
View 3 Replies View RelatedI get how you control the number of columns and rows and size of the grid, but how do you control the size of each individual cell? The Skew? Wasn't able to do get it the size I want with that so far.
View 3 Replies View RelatedI'm looking to create this polygon grid, I'm unsure how I'd do this and then fill it to get the same logo as the M3? URL....
View 17 Replies View RelatedHow do you turn off 'perspective' in rectangle grid tool?
View 1 Replies View RelatedI'm trying to snap a circle created with the Ellipse tool to the grid. However, the center of the circle won't snap to the grid, it's always the edges.
My circle is 4.7mm and my grid is 10mm with 2 subdivisions. How to get the center of a circle to snap to the grid?
Illustrator CS4: My arrow keys do not function with the polar grid tool. I cannot increase/decrease the number of rays or circles using my arrow keys. They are just dead in the water.
View 3 Replies View RelatedI have a user and when he's in sketch mode he trys to draw a line but it keeps on snapping to a grid. Both snap and grid setting are switched off. I can't find any settings he has different from my own set-up so I'm finding it hard to fox this problem. FYI, this user is a bit of a problem and tends to change settings without even realising he's doing it.
He's using Inventor 2012.
Revit has a propensity to locate a lay-in ceiling grid with a grid intersection in the center of the room. You can use the alignment tool to align the grid with a wall. But I see no way to center a tile in a room. This is often a necessity in a narrow room, to keep the lights centered. Also, installers, when not given specific instructions to the contrary, will often locate the ceiling grid to minimize narrow tiles at the wall. We need more control over the position of the grid.
View 1 Replies View RelatedWhen i pick points from the drawing using the ID command i recieve a long and meaningless coordinate which is useless to me when setting out. How i can rotate my drawing so that firstly its aligned with my grid and secondly give it the same coordinates as my site based local coordinated grid?
View 9 Replies View RelatedUnderstanding that composite volumes are typically more accurate, I have a reason to evaluate the volume between two surfaces via a grid volume. Easily created a grid volume surface using a 50' grid (50' is large for this site, but wanted to get a feel for calculation time).
Question: Can you change the grid size without creating a new grid surface? Ultimately I woud like to explore the difference in volumes based on grid sizing without creating a long list of surfaces. One would expect that you could chage the grid spacing in surface properties, but the values are non-editable.
I was working on some isometric drawings for my CAD class and I can't seem to figure out how to get the grid back to the standard 2D grid view that I used to get when opening CAD. I now jusr get this dotted grid every time:
[URL]...
I'm looking for an option to adjust the grid size and to snap-to-grid.
For some purposes, you can find a way around this, but it is a pain when working on a project that requires perfect precision.
The topic has been brought up before, but I'm hoping to hear of any news on the possibility of implementing it. I don't assume there has been made any plugins to cater this need since earlier posts on the matter, so I'm hoping to persuade developers to implement the feature in a new version of paint.net instead.
If you need to know more specifically what I'm looking for, then it's basically what you have in Adobe Illustrator or any decent 3D modelling software you will ever come across. It would work pretty much exactly like the grid already in place, except you would not be limited to working only with individual pixels, but rather groups of pixels as you zoom further out. The grid would preferably have thicker lines every 5, 10 or 15 lines, etc. for user to position the various elements.
I'm using Paint.NET 3.5.8 on Windows 7 SP1 64-bit.
While editing small (16 x 16) images, I noticed that Paint.NET used a grid with a width of 2 pixels. Selection rectangles snap to this grid, as do paste operations.
How can I specify the grid width or disable this snap to grid effect altogether?
I'm new in InDesign. How do I remove the purple grid that was already there when I made my document, WITHOUT removing ALL my grids?
View 5 Replies View RelatedExactly what the topic title says. My goal is to draw a custom map with pinpoint accuracy compared to what I envision it as. So, I want to use a grid that I can fill in the individual sections of to create this image, and then remove the grid afterwards when I finish, or at least make it completely invisible.
Is there anyway to accomplish that?
I have an interior laid out on a scaled grid, and I want to print a copy that displays the grid (ie: visible on the printed page). But everything (& I mean everything) indicates that grids per definition NEVER print.
I also thought that I could create my own grid on a separate layer, but if that's an option, I can't find that either...
I was thinking of something like photoshop can do. Have like a 32x32 pixel grid, then within that 32x32 square a 1x1 pixel grid show up? Of course a different lin maybe dotted?
View 14 Replies View Relatedhow to get to the grid tool and apply 32 Units?
View 2 Replies View Relatedi like to create grip , all it gave me is to use the filter -> render -> grid plugin , now for my job all i want to do is if i have for example square image like 1530 x 1530 and i want that the grid will be 8 x 8 matrix , when the grid lines are 1 pix width.
i dont what to calculate the right spacing on each grid cell as the grid filter gives me i just what GIMP to calculate me the right spacing for this image and grip line width.
i like to create grip , now i know i searched google and all it gave me is to use the filter -> render -> grid plugin , now for my job all i want to do is if i have for example square image like 1530 x 1530 and i want that the grid will be 8 x 8 matrix , when the grid lines are 1 pix width. i dont what to calculate the right spacing on each grid cell as the grid filter gives me i just what GIMP to calculate me the right spacing for this image and grip line width.
View 5 Replies View RelatedIs it possible to have the crop tool show a grid line using the rule of thirds? I just want to drag the crop tool set to a specific photo size ex. 4x6 and have the grid appear automatically.
View 2 Replies View RelatedHow to create grid texture in Photoshop?
View 2 Replies View RelatedIn photoshop, How would I create a grid with sequential number in any corner of each square?
View 2 Replies View Relatedthe autocad can create points on grid? I must stipulate the points to be sampled in the field / map, and would be a nice increase for the company. I'm sending a map, and I need a point every 2500 m square. I managed to do manually. I picked a line and divide segments of it with the command point. But I had to use the "copy" in each row of dots and copy down.
The attachment is a map with 32,81 ha ( 328100 m 2). That is, I need 4 points per hectare (10,000 square meters) in total 131 dots ( points )
In short, it is possible, in this map make a grid of points 2500m square from each other?
Is it possible to create a symmetrical grid in a mesh? without having to manually do each node and intersection? A simple square with just a small shape change to a corner causes non-symmetrical patterns in the entire mesh.
How is the mesh in CD different from AI? Of course there is a lot more online content for AI.
how to create a diagonal grid on an image. For example; [URL]
View 2 Replies View RelatedI was just wondering how to create a diagonal grid on an image. URL....
View 3 Replies View RelatedI wonder why when i'm using the 960 grid , everytime I start a new shape (here using the line tool) it comes linked with a layer color ? (is it really a layer color?) what's that called ?
why photoshop is always creating these embedded part to my layer ?
I also noticed that I can't change the color of the line tool so easily , let's say if I want to switch to "fill pixel" before using the line tool ... I can't it says the layer isn't editable... why ?
so the only way to add a color to a line is to set it BEFORE I draw it is that right ? And if I want to make it pop more I could play with the "fill" option , am I right ?
