I get how you control the number of columns and rows and size of the grid, but how do you control the size of each individual cell? The Skew? Wasn't able to do get it the size I want with that so far.
View 3 RepliesWhen using the perspective grid tool and type, I have a word on the right side of the grid in perspective, and I want to make a shadow of this word flat on the bottom grid. (Like how a tall building casts a shadow flat on the ground)
I tried using the shear tool to do it but it is a bit tricky getting it just right. There must be an easier way to do it within the perspective tool grid.
When I type the word and align it to the bottom grid, how do I rotate it whilst still being aligned in perspective on the bottom grid?If I try and rotate the word using the selection tool it rotates off axis so it is no longer laying flat on the bottom grid.
Words placed on the bottom grid always read from the left vanishing point - I want the word to read from the right vanishing point so it aligns with my word on the right grid wall.
want to translate my vector illustrations to charts for cross stitch kits. Using the grid tool, but the lines aren't equally spaced? I have a 100cm x 100cm document at the moment, with 1 cm making a 'stitch'. I want a grid that is 100cm x 100cm, made up of 1cm x 1cm squares for simplicity. Then be able to print the design out on the grid.
View 4 Replies View RelatedI'm working on a sticker with a Big Ben style clock on it. I've created it using the 2-point perspective ability in Illustrator. Unfortunately, I've decided that I want it to feel "taller" than when I started, so I need to shift the perspective. However, when I use the Perspective Grid Tool and adjust the ground or horizon line, it only adjusts the grid, not the artwork. Is there a way to have the artwork adjust with the grid so that I can move the artwork around in 3D space to find the right perspective?
View 3 Replies View RelatedHow do you turn off 'perspective' in rectangle grid tool?
View 1 Replies View RelatedI'm trying to snap a circle created with the Ellipse tool to the grid. However, the center of the circle won't snap to the grid, it's always the edges.
My circle is 4.7mm and my grid is 10mm with 2 subdivisions. How to get the center of a circle to snap to the grid?
Illustrator CS4: My arrow keys do not function with the polar grid tool. I cannot increase/decrease the number of rays or circles using my arrow keys. They are just dead in the water.
View 3 Replies View RelatedFirst one: When ever I try to make the All Ages font 3D It says 'Could not complete the command Path is too complex' something like that. So How can I fix it.
Second one: Is there a way I can Load selection and use the rectangular marquee tool in photoshop CS6? I tried holding shift then doing it but no luck.
Is there a rounded rectangular tool in photoshop 10? I can't find it.
View 2 Replies View RelatedThe problem is with the 'rectangular marquee tool' ... after I select a box, the tool defaults to a marquee that eliminates a portion of the first selected box. The curser changes to show the '+' curser with an 'x' in the lower right of the cursor.
View 1 Replies View RelatedMy first day using PS 7.0!
When I select an area with the rectangular marquee tool a window with the following text appears:
"Warning. No pixels are more than 50% selected, the selection edges will not be visible"
When I close the warning window the selection is no longer indicated.
When I use the rectangular marquee to crop a picture it now has rounded corners.
This has never happened before.
How do I get back to the square corners.
CS6
Win7 Pro
Why might the Marquee Tool be stuck on rectangular? I can't access Elliptical or the other types.
When I use the "Rectangular Marquee Tool" with my mouse, it is often difficult to do it accurately. Is there an easier way to do it than with the mouse, - can I manually enter the size of my selection .
View 2 Replies View RelatedI had this problem with my Photoshop CS, can someone tell me how to fix it?
View 2 Replies View RelatedWhen I try to use the rectangular marquee tool to select an area of any image the selection marker leaves dotted artifacts across the parts of the images over which the selection marker has passed.
View 1 Replies View RelatedMy rectangular marquee is stuck in some sort of scale restriction mode. It will only do narrow horizontal rectangular selections. How can I free it up?
View 2 Replies View RelatedSuppose I have an image 2000 pixels wide by 1000 pixels high. Pixel (0,0) is at the top left as you view the image. Using the rectangular selection tool, how can I specify an exact area to select? Say, for example, I want to select the area defined by (0,0), (100,0), (100,100) & (0,100), how would I do this?
I'm using Photoshop CS6 on a Mac with OSX 10.8.3.
I have CS6 on two Mac computers, a desktop and a laptop. On the desktop, everytime I draw a Rectangular Marquee, a very distracting black box with dimensions comes on at the lower right corner of the selection. This does not happen with CS6 on my laptop. I can't find a control to turn this box off. Where is it?
View 3 Replies View RelatedThe Rectangular Marquee Tool in CS4 has started using a solid line instead of the usual dotted line. Is there some setting to revert to the dotted line somewhere, or has my software just gone haywire? Feather is 0px and Style is Normal.
View 6 Replies View RelatedIs there a way to put up two or more pictures on the photoshop work screen (like the example below) and stitch them together using a rectangular marquee tool instead of just blending them
View 1 Replies View RelatedIf I make a selection using any of the Selection Tools then I can drag the selection with the same tool except for the Rectanguar Marque Tool (RMT). If I make a selection using the RMT then try to drag it then all I get is another selection. Photoshop CS5 on Windows 8. How to revert to the default situation where I can drag the selection, or has my installation got corrupted somehow ?
View 1 Replies View RelatedI have CS2 on Windows XP. For some reason (probably operator error) I can no longer move the Rectangular Marquee Tool in a fixed size mode arond my picture. When I expand it to, for example, 8.5" x 11" it just sits there.
I used to be able to expand it, then move it about the photo until I got it where I wanted to do the crop.Does anyone have any ideas what has happened? Also I notice that the crosshairs now have a little bar in the lower right quadrant when I roll my cursor on the photo. Not sure if that is significant.
I can select the Quick Selection Tool, which then presents the Quick Selection Tool and the Selecton Brush Tool options in the Tool Options bar (bottom left corner). But nowhere is there an option for rectangular marquee tool or elliptical tool. (This is for Elements 12)
View 3 Replies View RelatedI have NO idea how I managed to do this, but if I copy a piece from a file, the rectangular changes from square to sort of roundish.
And when I do copy and paste (control C - Control V), the edges of the copied piece in the new file are transparant. Which is exactly what I do NOT want! How can I change this back to the normal way of copying?
I'm trying to use the rect marquee tool to do a selection and then crop a photo but when I do nothing happens.
A couple of strange things have/are happening:
-At one point, while I was in transform selection I there was added space around the marquee, which became the new edge, as opposed to the marquee itself.
-The marquee is in the shape of a rounded rectangle.
Every time I try to move a section of a photo with the Rectangular Marquee Tool, I get an error message saying "Less than 50% of the pixels have been selected and they edges of the sections cannot be seen. What am I doing wrong?
View 2 Replies View Relatedand probably more, but when you consider how little functionality the loss of those three buttons give me, you can understand how little use I am getting out of CS6 so far.It makes no difference whether I use 32-bit or 64-bit.
I am using Windows 7 Home Premium on a relatively new Toshiba Satellite C660-1LD with 2.53 gigahertz Intel Core i3 M 380 with 3892 Megabytes Usable Installed Memory* with onboard Intel(R) HD Graphics.(Processor & Memory details from Belarc Advisor)
I sometimes get a message on load saying that Photoshop cannot find my 3D settings (although my Graphics card has 3D capability), but as I'm not using Photoshop's 3D editing tools, this is no issue to me at present.
I am trying to use the selection tool or the direct selection tool to create a rectangular marquee somewhere within the boundaries of an illustration.
I want to select only those objects that are fully or partially within that marquee.
I can use the lasso to select objects in this way. But if I try to use the selection or direct selection tool, it selects and moves the first object I touch.
I can use the selection tools and begin from outside the image area and create a rectangular marquee of selected objects. But I can't do this if I begin within the image.
Any script that will automatically put dimensions on rectangular shapes in Illustrator CS6?
View 8 Replies View Relatedhow to get to the grid tool and apply 32 Units?
View 2 Replies View Related