I was working on some isometric drawings for my CAD class and I can't seem to figure out how to get the grid back to the standard 2D grid view that I used to get when opening CAD. I now jusr get this dotted grid every time:
[URL]...
I have lost the grid view of my images on my Mac Book Pro. All I can get is the loupe view. I have lightroom 4.2. How can I get the grid view back?
View 4 Replies View RelatedAfter upgrading from 2013 to 2014 we have a few drawings that had profiles created in 2013 and now when we open the drawing in 2014 the profile view disappears and so we regen and then we get a fatal error. I ran an audit and there are no errors, I re-sycronized the surfaces, i also ran an audit on all the xreferences.
View 1 Replies View RelatedWe are having an issue with profile grid shooting off to the left of 0+00 rather than starting at 0+00 and stopping at the end of the profile. There is nothing in the settings that I can find that is telling the grid to extend close to 2000' to the left. Three of the four profiles are doing this. One of them displays correctly, but there are no differences that we can find in the settings.
View 7 Replies View RelatedIf you can see it in the image below, I am showing my minor grids with a dot linetype. I have a total of 6 profiles all of which appear to have the dots double up in random areas, they also print like this.
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
I've placed the Multi-Segmented Grids in my large project that requires (6) dependent views per floor plan. In each of the dependent views, I'm trying to get the grid markers to show at the ends that ~I~ want them to show, but I'm not getting the checkbox.
Is this by design? Or is it a bug?
I have a user and when he's in sketch mode he trys to draw a line but it keeps on snapping to a grid. Both snap and grid setting are switched off. I can't find any settings he has different from my own set-up so I'm finding it hard to fox this problem. FYI, this user is a bit of a problem and tends to change settings without even realising he's doing it.
He's using Inventor 2012.
When i pick points from the drawing using the ID command i recieve a long and meaningless coordinate which is useless to me when setting out. How i can rotate my drawing so that firstly its aligned with my grid and secondly give it the same coordinates as my site based local coordinated grid?
View 9 Replies View RelatedUnderstanding that composite volumes are typically more accurate, I have a reason to evaluate the volume between two surfaces via a grid volume. Easily created a grid volume surface using a 50' grid (50' is large for this site, but wanted to get a feel for calculation time).
Question: Can you change the grid size without creating a new grid surface? Ultimately I woud like to explore the difference in volumes based on grid sizing without creating a long list of surfaces. One would expect that you could chage the grid spacing in surface properties, but the values are non-editable.
Revit has a propensity to locate a lay-in ceiling grid with a grid intersection in the center of the room. You can use the alignment tool to align the grid with a wall. But I see no way to center a tile in a room. This is often a necessity in a narrow room, to keep the lights centered. Also, installers, when not given specific instructions to the contrary, will often locate the ceiling grid to minimize narrow tiles at the wall. We need more control over the position of the grid.
View 1 Replies View RelatedWhen using the perspective grid tool and type, I have a word on the right side of the grid in perspective, and I want to make a shadow of this word flat on the bottom grid. (Like how a tall building casts a shadow flat on the ground)
I tried using the shear tool to do it but it is a bit tricky getting it just right. There must be an easier way to do it within the perspective tool grid.
When I type the word and align it to the bottom grid, how do I rotate it whilst still being aligned in perspective on the bottom grid?If I try and rotate the word using the selection tool it rotates off axis so it is no longer laying flat on the bottom grid.
Words placed on the bottom grid always read from the left vanishing point - I want the word to read from the right vanishing point so it aligns with my word on the right grid wall.
There must be a key command to move between the grid panel or the filmstrip and the keywording panel, isn't there? I don't want to use my mouse. I just want to select the photo (if I'm in the grid panel I just move right arrow or left) and then go to the keywording panel (Command K) and then GET BACK TO THE GRID PANEL SO I CAN SELECT THE NEXT PHOTO. I've looked at a lot of articles and lists of key commands for Lightroom 4 and can't seem to find the answer.
View 4 Replies View RelatedI'm looking for an option to adjust the grid size and to snap-to-grid.
For some purposes, you can find a way around this, but it is a pain when working on a project that requires perfect precision.
The topic has been brought up before, but I'm hoping to hear of any news on the possibility of implementing it. I don't assume there has been made any plugins to cater this need since earlier posts on the matter, so I'm hoping to persuade developers to implement the feature in a new version of paint.net instead.
If you need to know more specifically what I'm looking for, then it's basically what you have in Adobe Illustrator or any decent 3D modelling software you will ever come across. It would work pretty much exactly like the grid already in place, except you would not be limited to working only with individual pixels, but rather groups of pixels as you zoom further out. The grid would preferably have thicker lines every 5, 10 or 15 lines, etc. for user to position the various elements.
I'm using Paint.NET 3.5.8 on Windows 7 SP1 64-bit.
While editing small (16 x 16) images, I noticed that Paint.NET used a grid with a width of 2 pixels. Selection rectangles snap to this grid, as do paste operations.
How can I specify the grid width or disable this snap to grid effect altogether?
want to translate my vector illustrations to charts for cross stitch kits. Using the grid tool, but the lines aren't equally spaced? I have a 100cm x 100cm document at the moment, with 1 cm making a 'stitch'. I want a grid that is 100cm x 100cm, made up of 1cm x 1cm squares for simplicity. Then be able to print the design out on the grid.
View 4 Replies View RelatedI'm new in InDesign. How do I remove the purple grid that was already there when I made my document, WITHOUT removing ALL my grids?
View 5 Replies View RelatedExactly what the topic title says. My goal is to draw a custom map with pinpoint accuracy compared to what I envision it as. So, I want to use a grid that I can fill in the individual sections of to create this image, and then remove the grid afterwards when I finish, or at least make it completely invisible.
Is there anyway to accomplish that?
I received a drawing that has a layout with multiple mviews in it. There is a light grey grid showing in the layout, that I can't make disappear. Grid on / off command has no effect. Really it doesn't matter if the grid is showing, but it's so annoying! Creating a new layout would fix the problem, but is there an easier way to get rid of the grid?
View 9 Replies View RelatedI am using Civil 3D 2014. I have a section view style that specifies 10-ft majors, displaying text labels for 10-ft majors. However, per the attached image, my section view shows the first label at a 5-ft interval and I have another that does not show the top 10-ft major.
View 1 Replies View RelatedI learnt that grid spacing in Section Views/Cross Section Sheets is controlled by the Bottom Horizontal Axes minor tick intervals and Left Vertical Axes minor tick intervals in the Section View Style dialog box(see Capture). If this is true what, then, is the function of the grid spacing settings in the "Plot Are" Tab of "Group Plot Style" dialog box (see the other Capture).
View 2 Replies View Relatedthe X value which is the section distance, and Y values are elevation.
Y - values how to limit them to 50' range.
X - values 23' range.
Im having an issue where the horizontal grid lines in my profile are projecting out past my last specified station (see attached) My profile begins at sta: 1+00 and ends at 1+12. My user specified station range is sta: 0+80 to 1+30. I didn't have this issue in release 11 (im currently using release 12) with this profile view style and i did hundreds of profiles with this very same style.
AutoCAD Civil3D R12 SP2
Windows 7 Pro 64 bit
Intel Core i7-2600 3.4GHz
8.0 GB RAM
Nvidia Quadro 600
I have a grid set up. say 10X10 each. I then fill in each square of the grid. I get rid of the grid, left with 10X 10 squares next to each other separated by 1 pixel then I do an outline to quickly get rid of the spaces between each square.
Now I I have 12 pixel wide line, now I would like to do an Inline (negative outline) to reduce the line back down to 10 pixel (or less ) wide line.
Since it is not exactly a straight line, but rather than a zig zaging line I can't exactly use the pixel selection tool.
I already check the setting layer assignment with color and linetype all bylayer using the office ctb BUT during preview in plotting it shows too thick. What do I miss to check or do?
View 2 Replies View RelatedI just purchased the new ACAD2014. It works fine but every time that I launch the program the opening screen shows a grid and I have to turn it off. Is it possible to start up without the grid.
View 2 Replies View RelatedI have an interior laid out on a scaled grid, and I want to print a copy that displays the grid (ie: visible on the printed page). But everything (& I mean everything) indicates that grids per definition NEVER print.
I also thought that I could create my own grid on a separate layer, but if that's an option, I can't find that either...
I was thinking of something like photoshop can do. Have like a 32x32 pixel grid, then within that 32x32 square a 1x1 pixel grid show up? Of course a different lin maybe dotted?
View 14 Replies View RelatedI have a problem with the z axis snap along grid points and lines in the perspective view, now i know that there isn’t a z grid visible but surely there is one non visible (like the z grid in the 2d views)that i can snap too. When i try to snap to points and lines in perspective mode, is the Object or sub-object just slams down to the grid and doesn’t move from there.
View 2 Replies View RelatedI updated to lightroom 3.6, I no longer have grid view when importing photos.
View 8 Replies View RelatedI’m not sure where the problem lies but when I view images in Lightroom 3.6 in the Grid View they are out of focus. If I view a single image in the Loupe View it’s fine. This doesn’t happen in any other application I run. My PC has an ASUS GTX 550 Ti graphic card
View 6 Replies View RelatedI have been issued the task of putting map grids on building plans. I have a number of building plans that I must put a square grid on top, with 2 meter between grid lines according to plan scale.
View 2 Replies View Related