Lightroom :: 5 Does Not Find Files On Camera For Import?
Dec 1, 2013
I have been using Lightroom 5 happily for several months with no problems. A few weeks ago, I started getting the message at the import screen that previews were not available. This was OK, I just guessed on which I needed to import.
Starting last week, I cannot import files from either of my cameras. On the import screen, when it is trying to find files, it just hangs up. Have let it go for half an hour and nothing. When I click "cancel", I get the message that Lightroom has encountered a problem and needs to close.
I have tried purging the cache, though I'm not sure it is working, as I never get any message that the purge has been successfully completed. I click the button and nothing happens. I have tried starting a new catalog in case my other one is too big (approx 14,000 images), but same problem. I have tried installing the beta 5.2 version, still same problem.
I would love a solution to this, as for now I am having to import the NEF files by just dragging them to a folder on my desktop, and then importing the files from that folder into lightroom (when importing from folders on the computer, I have no problems).
View 2 Replies
ADVERTISEMENT
Oct 10, 2013
try to import *.CR2 files from my new camera Canon EOS 70D to Lightroom 3.6, but it is not supporting format. What to do?
View 4 Replies
View Related
Feb 15, 2013
I imported some photos to develop. I did not finish developing them and imported another set. Now I want to go back to that previous import to deveop and edit, but I can't find those photos. They are grayed out in the import and I can not import again, when I click on one of them it says they are already in the catalog, but I can't find them any where in light room. Previous import does not work.
View 1 Replies
View Related
Jul 9, 2012
Camera Raw import filter for Nikon D800 NEF files in LR 3.6? I believe LR 4.1 supports this file type natively, but I am not yet ready to update to 4.1.
I can, however read these files in Adobe P-Shop CS5 and Bridge CS5.
OS: Windows 64)
View 9 Replies
View Related
Jan 19, 2013
How do i find camera proflies in lightroom 3.6.
I have Nikon D300s
View 2 Replies
View Related
Jan 31, 2012
I've just purchased a Pentax K-5 but when I import .DNG files from this camera into LR 3.6 there is only Adobe Standard and Embedded as options in Camera Calibration. I checked the release notes and the Pentax K-5 was supposed to be supported in Camera RAW 6.3. I looked in the relevant folder and I can see profiles for other Pentax cameras but not the K-5.
View 4 Replies
View Related
Apr 22, 2014
I have tried a couple of things to try and get Premiere to see the AVCHD files. I have copied the all the files over from the Canon Xa10 individually and the "Private" folder and then tried to import. Still couldnt see them. It seems like its not a supported file type. PP should be able to do this shouldn't it?
I currently am running Premiere Pro CS5 with Windows 7 64Bit
View 9 Replies
View Related
May 22, 2013
When I try to import photos from a camera or files I get this message The ODBC data source reported the following error: (internal error;data not found)
Why am I getting the error message and is there another way to import?
View 1 Replies
View Related
Jun 6, 2013
Tried importing files from memory card with pics taken in both JPEG and RAW. Imported JPEG's but not the RAW pics. It has accepted RAW files before. First time using Nikon D800 camera.
View 2 Replies
View Related
Jul 28, 2013
I upgraded from 10 to 11 just so I could do this, but it seems I was mistaken.
View 6 Replies
View Related
May 6, 2012
I'm trying to import photos from my camera, when I get to import after renaming, it won't let me - the import button is not highlighted
View 1 Replies
View Related
Nov 25, 2013
i just bought canon d70 i have camera set for raw and jpeg, lightroom 4 updated and set to treat jpegs seperatly, but it isnt seeing my cr2, it knows its there but says preview not available unable to import this file type
View 1 Replies
View Related
Jan 16, 2014
When I upload in i-photo I get a prompt asking me if I want to delete the photos from my camera. How do you do this in Lightroom?
Also, when in Lightroom can you 'safely remove or unmount' your camera from your computer? I have a mac and am not sure how to safely remove my camera when I'm not in i-photo.
View 27 Replies
View Related
May 26, 2013
I had LR4 working just fine but now I cant import from camera or memory card?
View 1 Replies
View Related
Jan 2, 2014
Let's start with my setup. I am on an iMac running Mavericks, which has been loaded since the first day of relesae. I have been using Lightroom with my camera since then with no sign of trouble and my camera is a Nikon D7000. I am not a newbie to Lightroom.
Here's what happened. Started Lightroom, plugged in D7000, turned camera on, went to Import screen. Unchecked a few images, created a folder for them to go to, applied 'Auto Tone' & copyright, did not rename the images. Hit Import. Then window pops up (which I didn't make a note of because I thought I could try it again) says error with the folowing files 1-100 (with checkbox) 101-200 with checkbox etc. So closed it out. No images were imported. Went back to Import only to see that the camera is not being seen at all, not even a camera error message.
So, I did the folowing things. I have restarted Lightroom, turned the camera on/off, disconnected/reconnected the camera in a variety of situations such as, before app launch & after app launch. I even tried to import via Bridge but no camera. Did I mess up the Camera profiles?
View 1 Replies
View Related
Apr 13, 2013
I have been importing and editing photos from a Canon Powershot S3-IS and never had a problem until today. This is the first time I've tried it with the latest upgrade to lightroom.
I first tried importing from my camera memory card slot. Lightroom froze. Then I tried using my card reader and inserting that in the USB slot. Lightroom froze. I tried to connect the camera directly to the computer with the USB cord. Lightroom told me that it could not import the files.
I tried importing the images to my computer and then from my hard drive copying them into Lightroom. That worked. Is the camera too old to use with the latest update from Lightroom. I would think a jpg. file would be pretty standard. how to import to Lightroom without the extra step?
View 3 Replies
View Related
Jul 31, 2013
I like using Bridge to import my photos but also like to use LR5. After I organize and edit in camera raw I want to import (ADD) the adjusted photos into LR5. Problem is the adjustments dont import into LR. The original raw DNG is imported without the fixing that I did.
View 1 Replies
View Related
Feb 2, 2013
I have Lightroom 3 version 3.6 installed on my MacBook. I just upgraded to OS X10.8.2. Now when I try to import raw images from my Nikon D3100 camera I get images to preview but after I select images to import and then select "import" I receive error messages and then a notice that there are no images to import. The import function then totally shuts down.
I also just downloaded the most current version of Java Run. How do I fix this problem?
View 4 Replies
View Related
Feb 15, 2014
All of a sudden LR4 will not import my images from camera card, whereas I-Photo has no problem. I get the message " Some import operations were not performed. the following files were not imported because they could not be read (all images on the card are listed). I have re-downloaded LR 4 and restarted my mac (OSX 10.8.5). LR also will not let me import the same images from I-Photo , it gives the same message as when using the camera card..
View 2 Replies
View Related
Sep 8, 2013
I am unable to import pictures from my camera or any other location. The following message appears:"Import Results..Some import operations were not performed.
The following files were not imported because they could not be read (1):..I tried this and does not work
"Generally, when things work at first and then suddenly stop working, the problem is with the preference files. These tell Lightroom how to behave and if something goes wrong with them, it tells the program to behave in a way that causes errors.
We'll want to recreate the preference file. Simply delete, rename, or move the file while Lightroom is closed and then reopen. On launch, Lightroom attempts to read this file for instructions, if it not there a new one is created with all default settings.
View 4 Replies
View Related
Mar 21, 2014
Using LR v5.3 and Windows 8.1
For my particular workflow, I find that loading thumbnails as step 1 of the import process to not be of much value for me.
I would prefer to load all images from the camera CF card directly into my "Import" folder in Lightroom without having to first view and select images for import.
Step 2 for me would then distribute the images into other named folders in LR prior to the development, skipping the thumbnail phase of the process.
So, the Q: Is there any setting that allows importation into a selected folder in LR without first going through the thumbnail process?
View 4 Replies
View Related
Nov 4, 2012
I have 1142 Camera Raw cache files. Do I need them all or can some be deleted?
View 1 Replies
View Related
May 27, 2012
I am trying to import raw files captured with a canon 5D mark III but getting message the files are from a camera which is not recognized byt the raw format support in Lighroom. I have checked that I have the latest addition of LR 3.
View 1 Replies
View Related
Feb 10, 2013
They're suppose to be the same as EOS-1D X files and LR and CR opens these files fine.
View 5 Replies
View Related
Jan 12, 2014
I just applied the Lightroom 5.3 and Camera Raw 8.3 updates and now am no longer able to open RAW or DNG files into Photoshop CC. When I select a file and choose "Edit In" Photoshop, photoshop will launch, then nothing will happen. After 2 to 5 minutes, an error will popup in Lightroom saying "The file could not be edited because Adobe Photoshop CC could not be launched." An error I've never seen before. When I click "Ok", Lightroom will show that it's "preparing a file for editing" in the upper left, it will create and save a psd to disk and in the catalog (another new behavior), then it will open in photoshop. All other file types (jpgs, tiff, psd) seem to work/open fine between applications. No difference if I open photoshop prior to selecting "Edit In". Selecting "Edit In" other applications, like Viveza, work fine.
I tried first deleting preference files in both applications. No luck. Ditto for plugins. Notta. Eventually I completely uninstalled and fresh installed Photoshop, Lightroom, and Bridge from the cloud. Same deal...can't open raw/dng files into Photoshop.
I'm on a PC running Windows 7 64bit.
View 2 Replies
View Related
Sep 11, 2013
I can't seem to get the cameraraw adjustment dcp files to show in lr5.2 they worked great in lr3.
What should I do(I use qpcard 203) ?
View 1 Replies
View Related
Apr 11, 2013
My raw files from my nex7 camera are not showing up to be imported into lightroom 3.6. I see that the camera is supported by lightroom so why do theynot show up?
View 1 Replies
View Related
Jul 10, 2009
When I use Lightroom to move photos from my camera to my computer, I want it to automatically delete the copied files from my camera. How do I do this?
View 17 Replies
View Related
Sep 16, 2013
I have a camera not (really) supported directly by LR - so i use .tiff files created by the camera bundled software.This works fine,
Now i would like to be able to use my own camera profiles with LR with my .tiff files - when i open the RAW files (an old version is supported, so they can be opened) the profiles are availiable as expected, but when i change to the .tiff version of the file, the profiles are gone.
View 7 Replies
View Related
Mar 9, 2013
I have a camera not (really) supported directly by LR - so i use .tiff files created by the camera bundled software.This works fine, and i have earlier had support from this forum regarding lens-profiles using .tiff files, with great success.
Now i would like to be able to use my own camera profiles with LR with my .tiff files - when i open the RAW files (an old version is supported, so they can be opened) the profiles are availiable as expected, but when i change to the .tiff version of the file, the profiles are gone.
View 3 Replies
View Related
Mar 17, 2014
I have a lot of images in my library. Last night I was working on a picture, I had to force restart the computer this morning.Just wondering if there is a way like "previous import" to show the images "Developed"
I don't use smart collections much. Could that be set up as an attribute? Like the way Itunes has last played in decending order.
I'll have to scroll through 5,000 images now to find it and export to PS for some final work.
View 4 Replies
View Related
