Once i apply my presets on raw images in camera raw i click to save all of the photos as JPGs. At the begining the saving takes 1.5-4 seconds per image. After saving for a while computer slows down and it takes almost 10 seconds to save one image.
It took more than 10 hours to save 4000 raw images as JPGs.
Tech Specs:
Photoshop CS6 x64
Windows 7
ACPI x64 based PC
Intel i7 3.40GHz
Sata AHCI controller
NVIDIA GeForce GTX 560 Ti
Samsung SSD 840 Pro 256GB
I produced a 4 page A5 brochure in InDesign. I would like to present my brochure as a mock-up. Should I use photoshop? Should I save the 4 pages as JPGs then place into Photoshop?
I did notice that zoom in or out in camera raw is slow , even in middle pc , i'm not talking about hi end pc but i did find it's amazing fast if use process 2003 or 2010. May i use like default the 2003 or 2010 ? How can i do it?
I have problem with save for web in PS CS5 (12.0.1). It is extremely slow. For example selecting anything from menus takes couple of seconds. I deleted PS preferences files but that didn't work.
am running PS CS2 on a very hi spec win XP machine
everything else in PS is running super fast - but when I "save for web" there is a fixed delay of about 5 seconds while the file location dialogue box comes up (even for small images).
I am having an issue in Save for Web where the .gif animation preview works very slow and choppy. I am an advertising designer and many times I need to work on animated .gif banners. I am working with Photoshop CS6. When I play the animation in the frame timeline the animation speed works as intended, a little choppy but the timing isn't too bad. However when I go into the Save for Web screen and play the animation it always appears a lot slower and looks choppy. Anything se to 0.0 or No Delay runs as if its set to .1 seconds. Now if I export the file and open it in Chrome the animation speed seems to go back to normal. This wasn't always the case, I tested this 2 or 3 months ago and the animation speed in the export was also slow and choppy but it must have been fixed in one of the updates since then.
My issue is I don't want to have to preview everything in Chrome after I export it, and then possibly have to go back and tweak it then save again, preview again etc. I have never encountered this issue in previous versions on Photoshop or other machines. Ususally my experience has been the opposite, the frame timeline has always been slower, but previewing in Save fro Web has shown a pretty accurate preview.
I also have a HP laptop running Windows 7, photoshop CS6 and I don't encounter this issue at all. Default answer on all of the forums is "different browsers handle .gif animation speeds differently, etc.." but int he past I have saved a .gif on my mac and it was slow and choppy in the Chrome, then I saved the same file on my PC transfered it back to the mac and previewed in Chrome and the animation played quickly and smoothly.
I can't see it being a hardware issue because the machine I am using is farily new. iMac Late 2013/2013, 3.4 Ghz Intel Core i7, 16GB RAM, NVIDIA GeForce GTX 675MX 1024 MB, running OSX 10.8.4 Mountain Lion.
Could it possibly be a setting or preference that needs to be changed? As I stated above it seems that now when I export the animation works fine in the browser the preview is just slow.
I have CS6 installed on a Mac Pro desktop, 3.3 Ghz machine, 6 Gb RAM, running OS X Mountain Lion. Everything is running fine, updated and it's a great machine. But I've noticed that opening Photoshop files that are somewhat large and layered take WAY too long to open or "save." I mean...3 minutes is much too long to wait.
I have a spare physical drive configured (in preferences) for extra RAM, with plenty of empty drive space. The startup drive has well over 250 Gb of space remaining.
The only applications running are Photoshop and Bridge. There is 6 Gb of RAM to run these applications and open files. OpenGL is checked in Preferences and I'm running an nVidia graphics card, as well.
When I hit the save for web menu item it can take 5-30 seconds for the dialog box to launch (cs6). Seems that cs6 is doing some heavy disk activity but not sure what its actually writing or doing but I have a fast machine with lots of memory and plenty of CPU yet I get these VERY long delays. All I can find on this problem is that people had suitcase instaslled and I do not. So how I determine what is going on so I can stop this.
My 8 core 2.8 GHz Mac Pro has 10 GB RAM and a blank 100 GB scratch disk. Photoshop is always quick. Has been for years. Suddenly today, Photoshop is slow like molasses to open & save files. Lots of progress bars and wait cursors. Everything else on the Mac is fine. It boots quickly & normally, and other apps are happy. My boot drive, a clean installed Mountain Lion system, says S.M.A.R.T. Status: Verified. In Activity Monitor, a process with ID # 0, Kernel Task, was using 700 to 800 MB RAM, while another process, mds, with ID # 44, is using 350 MB RAM.
I should add that I booted from a backup system and its copy of Photoshop was also doing the same thing. In addition, a high level troubleshooter on Apple Discussions informed me that my present level of 500 MB RAM for Kernel Task is normal. So all I know is Photoshop is suddenly slow.
I just started experiencing issues with the PS CS6 Save for Web dialog window. It is very slow to respond to mouse clicks. I use Creative Suite 6 on Windows 7 Home Premium 64-bit with a Gen 3 Core i7, 12GB of ram and a 3GB Nvidia 670m video card so I know it's definitely not hardware related.
we are running photoshop 8 in a windows 7 environment, and are experiencing daily hangups, slow save and output times, and software crashs....are there any patches or hotfix downloads avail? or maybe just tweaking? I've search thru the "help" section and can't really identify any.
I've got a lot of scenes that have become exceedingly slow to save and load. Like often taking 10 to 20 minutes to save. With looming deadlines this is becoming really desperate! I've tried merging into a new scene, running scripts to clean out notetracks etc. Even after deleting every object and material, and resetting all render settings, the file is still inexplicably slow. See attached example.
In camera RAW, to save a JPG you click on the 'Save image...' dialogue and another window opens with the JPG options. To skip this window and directly save the image, you hold down the ALT key and click on the 'Save image'. Is it possible to reverse these settings, so that if you want the JPG dialogue to open you have to hold down the ALT key and to save without the dialogue, you just click on the save button?
I have Photoshop 10.0 (Windows XP) and use it to edit my photos from my new Nikon D300 camera. I create and maintain my images in JPG format as a preference and have no plans of saving in RAW. My D300 includes 40 to 50 camera info/metadata elements including the camera and lens settings at the time the photo is taken. When I do a simple "Save As" in Photoshop 10 to a new JPG file (whether image adjustments are done to the source image or not), the new JPG file is stripped of about half or more of the original camera-specific metadata elements. Is there a Photoshop setting or Nikon/Photoshop plug-in that will force the software to preserve/retain the original metadata? (The Capture NX2 solution is not an option as the one key feature I use is Auto Levels - The Auto Levels feature in Capture NX2 washes out my photos to an undesireable state). Therefore, I need to continue using Adobe for the benefit of their better Auto Levels feature and I also use their automation heavily as I process 100's of photos at a time. The only drawback of Adobe right now is they discard most of the camera specific shooting data at the time of save. RAW is not an option as the file sizes are too large for my storage, sharing and usage needs.
I just recently upgraded from WinXP64 to Windows 7 Ultimate 64 and everything is good… aside from the fact that everytime I save the files, it is realy slow
I never had this issue before (although when I think about it, I used to work on another Win7 station a few months ago and I had the same issue)
I think the reason is OS related as everytime I click on save, it “re-creates” the file from scratch… This is not much of a problem on small files… but I have scenes that are over 500MB each and it takes forever to save everytime (not that the scene unreliability is not enough!!!)
I noticed that save a drawing with a big number of db takes a lot of time, i checked with several computers, i monitored the cpu, memory hard disk and they don't getting to limit or nearby, i checked with proces monitor and found a lot of writes, look at the file, with ssd its the same, what can i improve in hardware to save faster?
We have started to deploy AutoCAD 2011 64 Bit on Windows 7 64 Bit machines and have come across an issue where when opening or saving files across a Cisco WAAS accelerated network that have referenced images takes a lot more time than drawings that do not have attached images. We have updated graphics drivers to the most recent certified driver from the autodesk site as well as disabling Aero and all the other Windows 7 tweaks to no avail. The files with images still open/save much slower than those without.
I am working on six very similar map documents. They all are moderately complex with layering, drop shadows, and some placed raster files. I have linked rather than embedded the big tif raster files.
The confusing thing is that some of the illustrator files save in 2 seconds, and some of the files save in 2 minutes.I have compared all the settings, and I don't see what I'm doing different on the ones that take a long time to save. All big placed files are linked, not embedded.
The only clue showing a difference is that the files that are taking a long time to save are about 200mb in size. The files that are saving quickly are about 1mb in size.
In CS5 Bridge I want to see the exposure speed immediately for any chosen picture. So I choose exposure plus exposure correction in Bridge presets.
But after starting my PC the next time, this setting is automatically brought back to "exposure mode" plus "exposure index", which has the effect, that Bridge once again doesn't show the exposure speed (1/30 or 1/100) for the photos. What to do???
i have big problem to save in Autocad 2011, then we save in 2007 DWG format it takes up to 3-4 min even local this problem exist, reinstalled i computer totally clean, no antivirus just windows 7 and updated,even disabled fidelity. then i save in 2010 format it goes fast.
CorelDRAW X6 has been lovely and fast for me these last few months but the reason I quit Corel for a number of years was that, after a while it seemed to slow down. Now, suddenly, when I save a file of exit the program freezes for approx 35 seconds before finally closing. It makes no difference where I save the file (on my SSD C Drive or elsewhere). I have a 6 core, 32gb RAM etc and, as I was saying, it worked until today but suddenly this.
Autocad 2012 was working fine until a week ago when it started taking a long time to open drawings--even search for drawings on our network. It also takes at least 30 seconds to save files, where it used to take 5 seconds at most.
I found the AutoCad 2012 and AutoCad LT 2012 SP1 Ribbon Hotfix, which sounded like my problem, but it is for Product Version F.107.0.0 and I have Product Version F.51.0.0.
I work in a print shop that prints biggish stuff. I will frequently have files that postscript to close to a GB or more. Working on simple vector art with a few images in CC is not too much of a problem, but I still notice CC is slower than CS 6. The big problem is when I get a few 200mb PDF's, or files with layers of transparent PSD files in them etc, big busy files, then AI CC really bogs down, or frequently crashes altogether. CS 6 is MUCH better. I don't have the font issues, AI CC works fine with simple files. Saving & opening these big files is such a problem, I just save them back to CS 6, but that causes problems too, I do not want to, nor should I have to have 2 versions open at the same time.
I always try to optimize the files as best possible, but it is tough sometimes as they R supplied by the customer, and the time it takes. We save to a Windows Server 2008 R2 box over gigabit network, which I know is not best practice, but no choice with the sheer volume of files. Would B insane to try to keep track & copy them back & forth, and it was never a big issue with CS 6. I am the first victim in our office, but the other 3 Mac Pro's will B switching over to CC this week, and I know the operators will B crying.
I have recently installed Corel X6 and have found it to be painfully slow when opening files. At first I had thought it might be a network issue so I copied the file to a local drive and experienced the same problem.
The file is only 819Kb but it takes about 3 minutes to open the file. When I first select the file in the File Open dialogue window Corel just hangs for about 1 minute. It finally responds then takes a further 2 minutes to process and open the file.
I have turned off my antivirus software as I thought this might be a file scanning issue but still the same result.
I am having an issue when opening and saving files is very slow when I have a project active in the Project Navigator.
If I have an active project, and I open a file via Project Navigator or Windows Explorer, the process hangs for 15-20+ seconds at the 'Opening C:xxxxxxxxxxxxxxx.ac$' point, where it is creating the temporary file.
If I 'Close the current project' in the project browser and open the same file via Windows Explorer, the process takes less than a second.
Camera Raw takes almost 2 seconds to save 103MB tiff file. (I use Photoshop CS6)When i save a bunch of tiff files, camera raw uses only half of my CPU and half of my RAM. In addition, I use SSD that writes 530MB/s outside Photoshop. According to these specifications it should save 5 images within one second. But it doesnt.
I created a 3d object in AutoCAD 2012. Set a camera at desired location.
Then switch to paper space, created an mview and set the camera view, then added some mtext and dimensions. Locked the display view, save my work and close AutoCAD. Now here's the exciting part. i re-launch AutoCAD and open the drawing. The drawing was messed up. It does not display the correct camera view that was previously saved. It sounds strange but I do it over and over and same thing happens.
how to make my photshop application fast few days ago it was working good but now its performance is slow and my computers speed is also slow. How to fix it?
I have given a disc of photos to a client that she can't access without launching Photoshop on her Mac. They were scanned by me on an Epson as jpgs, then run through Photoshop (CS1) for touch-up and resaved as jpgs by me. Now I look under "get info" and see that they are all saved as "Photoshop Jpgs". this can be a big problem, as I intend to make a lot of discs for clients in the future. I don't want to have to tell them to use "Open with" every time they want to view a photo.
