I just started experiencing issues with the PS CS6 Save for Web dialog window. It is very slow to respond to mouse clicks. I use Creative Suite 6 on Windows 7 Home Premium 64-bit with a Gen 3 Core i7, 12GB of ram and a 3GB Nvidia 670m video card so I know it's definitely not hardware related.
View 7 RepliesNew CC is locked up after trying to install Topaz filters. CC responds to no mouse clicks at all. Was able to install NIK filters OK.
View 7 Replies View RelatedProblem: When doing a series of rapid mouse clicks, Autocad does not always register the clicks. For example, I'll use move, and when clicking on a line to move, it wont' see that I clicked on the line. I also notice that my crop box does not always work to select objects when i'm going fast. some times it does not show, others is goes to random points on the screen while still selecting the areas i've clicked in.
I've only noticed this problem when I'm in "the zone" and am clicking very fast, when I go slow, it picks up the clicks. its very frusterating knowing that I can't work as fast as I can without having the click input issue. I mostly notice this problem with commands like, erase, trim, move, and extend.
I do have my system set up for right mouse click as 'enter' via the autocad options, not sure if that has anything to do with it.
- It is not the computer system ( I recently got an upgrade at the office )
- Its not my mouse. I've tried several mice, and at home, in games and such, I don't get the fast click issue.
- I've changed the double click speed in the control panel when opeing folders, but no luck.
- its not an OS issue, happens in both XP and Win7, and shouln't be a computer hardware issue, considering I just jumped from a P4 to a new Haswell system.
- I don't know if it happens on other versions of autocad
LR 5.3 loses mouse clicks, caused my mouse to act erratically, and often "blinks off" for an instant.I'm running it on a Windows 7 machine with 9GB memory.
Catalog has 30K files this started happening with LR 5.2.I've been using LR for years, so i know what a performance problem looks like.
Is there any way to use arrow keys instead of mouse clicks to move the trim markers (or frame forward/back)? I have arthritis and am not able to do the hundreds of mouse clicks that seem to be required.
View 9 Replies View RelatedWhen I select clone stamp, then right click for the menu, there is a delay, about one time out of ten. It's the same when I move the mouse onto a pallete; the pointer disappears for a few seconds. Is there a setting I can change to reduce pointer delays?
Also, I'm running a dual-core processor. Do I need to set photoshop up any different?
I want to use three points. Now I have to use lines, etc.....
Nobody never thought into the needed of simply use three any points.?
(I'd want to use even 3 simple mouse clicks)
Civil 3D (2013)
I have 65,000 photos in catalog / organizer. I note the thumb.5.cache file is 1,165,292 KB.
View 5 Replies View RelatedIf you use spot removal function a few times in a lightroom session, you end up with the impossibility to use it anymore if you do not exit lightroom and start again from zero.
What I mean is that after a few clicks on spot removal on 2-3 pictures, when you need to use it again on picture number 4, for example, the function is almost unusable (very slow movements that make impossible to put the spot tool in the right place).
If you then exit lightroom and start again everythimg is fine for a while. It seems it is allocating memory each time you use it..
Some time ago, the Gimp stopped responding to my mouse in the image window. In other windows and on menus the mouse works fine (ie I can select brushes and such and use the interface without problems), but in the image window (or more precisely, the canvas area) it's as if the mouse doesn't even exist. All kinds of clicks are ignored, the rulers doesn't show the position of the cursor, and the position in the lower left also isn't updated (it isset once upon entering the window, but after that it's dead).
This originally happened out of the blue one day while using Gimp 2.2.11 . I tried upgrading to 2.2.12 and then 2.3.13, without success. I also deleted the ~/.gimp*directory in the hope that regenerating the config would fix the problem, but no.
No matter what I do, I can't make the Gimp recognize the mouse in the image window. The mouse isn't anything special, and it used to work with the exact same X config I've got now. I haven't changed the xorg.conf file in several months. The Gimp is the only application with this problem.
This is on a dual-core amd64 processor in 64-bit mode (haven't tried 32-bit), Linux kernel 2.6.18, Xorg 7.1.
This is a incosistent problem, in which I cannot determine why it's happening and it doesn't happen all the time. I often restart Lightroom and it is ok after that.
In a small area of the screen the curser doesn't function. I cannot select an image or anything in that area while in the library module and when in the develop module brushes change back to the arrow icon and don't allow me to click in that area.
This is my first time using Lightroom and am currently using version 4.3 that I downloaded from the Mac App store. I am running a new MacBook Pro with OS 10.8.2 Mountain lion.
Have the new 64 bit version of Civil 3D 2011 running on a desktop.
Desktop specs
Windows 7 x64
AMD Phenom 8450e Triple-Core processor 2.1 GHz
8 Gb Ram
ATI Radeon HD 3200 graphics card
I have noticed while running both Civil 3D 2011, and AutoCAD 2011, that the software tends to "not respond" pretty frequently. It also seems to lag every once in a while when scrolling. Not sure if maybe there is something else I need to do to optimize my computer to be able to handle the civil 3D software better? I would think the triple core processor and 8 gigs of ram would be enough, but maybe not.
I can save a .ai file but not a .eps file it starts but freezes and does not respond
View 7 Replies View RelatedHow come the zoom on middle mouse reacts so slowly compared to using the zoom icon (magnifier) ? its slow, clunky and takes a moment to get going, it also has zoom limits which the magnifier does n`t.
View 2 Replies View RelatedI am running autocad lt 2011 with the latest windows 7. My mouse is very jerky within paper or model space but especially when I try linear demand or line demand.
I have tried accessing performance tuner but cannot find it, I have reset my hardware accelator to 0. I am not using an aero graphic within windows and am checking my graphics card.
On Civil3D 2007, at least on my machine, the mouse seems to move slowly when it is over the drawing space, but moves at normal speeds when over menu or toolbar items and when in other applications. It's almost as if the "resolution" of the mouse changes as soon as it is over the drawing area in Civil3D. The result is that the mouse/pointer falls behind a little bit when you move it, almost like it does when you use a remote computer over a slow network connection. This makes it difficult to have precise mouse movements.
I should also mention that I don't have this problem in any other applications, including Land Desktop 2006. Some hardware specifics: Dell, P4-HT 3.0GHz, XPpro machine, 2 gig of RAM, RADEON X600 256MB video card, single monitor, Logitech Mx500 mouse, all updates current.
We have installed autocad 2013 on windows 7 64bits VM (xendesktop 5.6 on VMWare Hypervisor) and the mouse move is very slow or the cursor stop and move again.
I have tried these tips without success
[URL]
I'm currently using windows 8. OS Version is not related to this issue I think since I'm using both CS5 and CS6.CS6, compared to CS5, scroll increment is just too small, and there's no option for this in CS6. It is a real pain while zoomed in.
View 1 Replies View RelatedIt's a Q6700, 4GB, 2TB drives, Epson R2880 running Windows 7, 64-bit. CS4 is very peppy, runs great, opens, closes, edits, NO PROBLEM.
UNTIL you decide to print. Once you hit the print selection it takes a MINIMUM of 40 seconds for the CS4 print dialog to appear. If you then hit the "page setup" button, it'll be at LEAST another 30 seconds before that appears. Once they're up, you can navigate around and make changes, but once you hit the print button on the dialog it'll be another 10-15 seconds before it responds and if you specify "Print Preview" it'll be at least another 30 seconds before you get the preview. Once it hits the printer, it prints fine. There haven't been any software or hardware changes in weeks, except the weekly MS updates that get installed.
I've tried large images, and small images in case there was something CS4 was doing. This process is this slow when printing a 4x6 greeting card or a 12 x 18 photograph.
What's interesting is this is a new phenomenon... It worked FINE up until sometime last week. Then suddenly, slow....... Concurrently, the print dialog STOPPED DISPLAYING INK LEVELS. The status monitor still displays them, but the printer dialog no longer does.
I've unloaded the printer and cleaned off every file I could find that appeared to be associated with an Epson print driver. Went to Epson and got the latest, Windows 7, 64-bit set of drivers and status monitor and installed that. No difference. Also tried a new USB cable AND switched it to the other USB port on the printer and on the PC. Nothing's made any difference......
If necessary, I can have her re-install CS4, but is there anything that should be done before we start clobbering major applications, or ever worse, the operating system?
i am trying to do this in gIMP. The closest i can get is checking angle/direction in the dynamic editor but it doesn't quite look right at all. Almost, but no. It is almost like the lines are lagging or slow to pick up on my mouses direction? If that makes any sense. i want it to look exactly like that video or if you don't want to watch it, a treasure map effect.
View 7 Replies View Relatedam experiencing display problems with Civil 3d 2012 on my Hp Elitebook laptop, when i open surface properties and go to styles dropdown menu i get empty dialog but if i move mouse cursor out of the dialog they appeared the same issue appears on other dialogs. I installed c3d 2013 trial still i get same problem. I installed autodesk certified driver same problem.
View 7 Replies View RelatedHow to save files with spaces insted of dashes in Save for Web dialog window in Illustrator CS6?
View 9 Replies View RelatedThis was originally posted under 2009 - but I have this issue in 2010!
The old post was: Block Editor Posted: Aug 1, 2008 7:01 PM
When I go into block editor, edit the block then close it out. My cursor is really jerky in model space. Especially bad when I go into a command and try to select something. The only way to get rid of the jerkiness is to close auto cad and restart it. Is there anyway to cure this?
I have 2010 and am experiencing this exact same problem. It is intermittent and will sometimes 'go away' after a few minutes. Block editing is definitely related as a cause. I use SDI = 1 predominantly and it seems to be session independent. In other words one drawing session is experiencing the problem but jumping to another concurrent session exhibits no issues.
Task manager shows off the chart 99% plus on process ACAD when it is occurring.
Palette transparency is off globally. I have installed the latest NVidia driver for my Quadro NVS 285 video card. I am running a 3GHz P4 with 4 Gigabytes of ram - Dell Precision 380 workstation. Block Editor background color is default.
Restarting AutoCAD does make it go away - for the moment - but it is soon back. Even closing all tool palettes has no effect.
This does seem to be drawing specific - 2010 seems to be sensitive to something in older drawing blocks - prototype drawings from hotel vendors for instance - most likely inherited from a third party DXF process exhibit the issue heavily - and blocks from these drawings to a lesser degree. I have to constantly purge, audit, and wblock/replace my drawings to keep them clean. My default file type is 2010 which 'seems' to work, but it still happens. Audits show constant drawing errors cropping up, and repeating an audit, shows the same errors until a wblock replace is performed.
I have problem with save for web in PS CS5 (12.0.1). It is extremely slow. For example selecting anything from menus takes couple of seconds. I deleted PS preferences files but that didn't work.
My system is Win7 x64, Intel i7 930, 8gb RAM.
am running PS CS2 on a very hi spec win XP machine
everything else in PS is running super fast - but when I "save for web" there is a fixed delay of about 5 seconds while the file location dialogue box comes up (even for small images).
I am having an issue in Save for Web where the .gif animation preview works very slow and choppy. I am an advertising designer and many times I need to work on animated .gif banners. I am working with Photoshop CS6. When I play the animation in the frame timeline the animation speed works as intended, a little choppy but the timing isn't too bad. However when I go into the Save for Web screen and play the animation it always appears a lot slower and looks choppy. Anything se to 0.0 or No Delay runs as if its set to .1 seconds. Now if I export the file and open it in Chrome the animation speed seems to go back to normal. This wasn't always the case, I tested this 2 or 3 months ago and the animation speed in the export was also slow and choppy but it must have been fixed in one of the updates since then.
My issue is I don't want to have to preview everything in Chrome after I export it, and then possibly have to go back and tweak it then save again, preview again etc. I have never encountered this issue in previous versions on Photoshop or other machines. Ususally my experience has been the opposite, the frame timeline has always been slower, but previewing in Save fro Web has shown a pretty accurate preview.
I also have a HP laptop running Windows 7, photoshop CS6 and I don't encounter this issue at all. Default answer on all of the forums is "different browsers handle .gif animation speeds differently, etc.." but int he past I have saved a .gif on my mac and it was slow and choppy in the Chrome, then I saved the same file on my PC transfered it back to the mac and previewed in Chrome and the animation played quickly and smoothly.
I can't see it being a hardware issue because the machine I am using is farily new. iMac Late 2013/2013, 3.4 Ghz Intel Core i7, 16GB RAM, NVIDIA GeForce GTX 675MX 1024 MB, running OSX 10.8.4 Mountain Lion.
Could it possibly be a setting or preference that needs to be changed? As I stated above it seems that now when I export the animation works fine in the browser the preview is just slow.
I am using Photoshop CS5 and when I save for the web, my saves are extremely contrasty. When I save normally they are fine. I have tried every setting I can find in the Save for Web dialog box.
View 1 Replies View RelatedI remember back in CS3 we had the option to use the Adobe dialog for Saving and Opening files. On CS4 I don't have this feature anymore. Was it included or do I need to change a setting?
View 11 Replies View RelatedI have CS6 installed on a Mac Pro desktop, 3.3 Ghz machine, 6 Gb RAM, running OS X Mountain Lion. Everything is running fine, updated and it's a great machine. But I've noticed that opening Photoshop files that are somewhat large and layered take WAY too long to open or "save." I mean...3 minutes is much too long to wait.
I have a spare physical drive configured (in preferences) for extra RAM, with plenty of empty drive space. The startup drive has well over 250 Gb of space remaining.
The only applications running are Photoshop and Bridge. There is 6 Gb of RAM to run these applications and open files. OpenGL is checked in Preferences and I'm running an nVidia graphics card, as well.
Once i apply my presets on raw images in camera raw i click to save all of the photos as JPGs. At the begining the saving takes 1.5-4 seconds per image. After saving for a while computer slows down and it takes almost 10 seconds to save one image.
It took more than 10 hours to save 4000 raw images as JPGs.
Tech Specs:
Photoshop CS6 x64
Windows 7
ACPI x64 based PC
Intel i7 3.40GHz
Sata AHCI controller
NVIDIA GeForce GTX 560 Ti
Samsung SSD 840 Pro 256GB
This is happening intermittently, most often after flattening a multi-layer image converting to 8-bit then trying to save as a jpeg, the error occurs as various points during the "save as" dialog. When I installed a 3rd party plugin (correctly installed and up-to-date NIK collection) the error occurred more or less on every "save as". I'm running Windows 7 Professional 64-bit. I've tried resetting prefs and I've removed the 3rd party plugins and I'm back to crashing about 30% of the times I use "save as"
When the error occurs It appears to have an event 1000 in the event log. I've copied the "system info" and one of the crash report texts below:
System info:
Adobe Photoshop Version: 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:12, Stepping:2 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
[code]....