am experiencing display problems with Civil 3d 2012 on my Hp Elitebook laptop, when i open surface properties and go to styles dropdown menu i get empty dialog but if i move mouse cursor out of the dialog they appeared the same issue appears on other dialogs. I installed c3d 2013 trial still i get same problem. I installed autodesk certified driver same problem.
View 7 RepliesWhen I move my mouse over my image the brush cursor is not moving and it will not let me click on my image (with the mouse) the crosshair/cursor will follow it, however the brush will not, nor will any other tools, my wacom tablet however works fine.
I thought it must be something to do with GIMP accepting input but its not going as of yet.
how to turn off the mouse function when the mouse cursor moves over a feature, such as an edge, point, or surface, and highlights it. I don't want it highlighting the features automatically. I want it to highlight once I click over a feature. My colleagues and I are very distraught by this feature, and will be discontinuing our use of your products that do not allow us to turn this feature off. I'm not sure why you'd want to weed your customer base like this, assuming that I can't turn this option off from the research I've done pouring through the hundreds of complaints related to this issue. I haven't been able to find any posts recently, or regarding Inventor 2013 specificially on this issue, so I was hoping this version had the option of turning it off. Does any of Autodesk's software, such as AutoCAD, have the option of turning it off?
View 5 Replies View RelatedHow to use touch move and mouse move events events to move elements n edge?
View 4 Replies View RelatedIn dialog boxes the drop down menus appear blank until I drag the mouse over it then the contents appear as I drag the mouse across. Also the cursor doesn't echo back (flash). I have tried updating drivers to no avail.
Running Civil 3D 2011 with all updates.
Windows 7 64 bit
16 gig ram
Quadra fx 1800
Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz
I have attached a couple images to illustrate.
The issue I am having a problem with is a mouse cursor freeze when I select an object with no command active.When I select an object, the cursor will freeze for about a second before I can move it again. When I hit escape to de-select the object the same thing happens.
This is with Acad LT 2011. WinXP. Normal operation this computer runs ACAD quite fast, no particular lags or anything except maybe when selecting to copy or move very large groups of objects, or when switching between layouts or to model space when there is a fair amount of stuff in the layout, or when regen on a large file size.
This mouse cursor lag was not always the case, but at some point this problem appeared.I have tried save, regen, regenall, closing the drawing, exiting ACAD LT, rebooting the computer.
It's very irritating, since so much of using ACAD is clicking and doing things with the mouse, that it really slows down my production, to have to get a cup of coffee every time I do a select action with the mouse.About a week ago I installed the trial version of LT 2012 to see if it was different. When I opened the same dwg in 2012 there was no lag.
I then closed this and opened the dwg in 2011, and there was no lag. So it seems that the installation of the 2012 trial version changed something in the way 2011 operated.It has been operating fine now with no lag until this morning. Now I have the lag again.When I now open the same dwg in 2012, I now have this lag in 2012 as well.
I did not change any settings in 2012 or 2011 like hardware acceleration or whatever. I just suddenly had this lag, and now I can't seem to get rid of it. Attached is a file that was made by opening ACAD LT 2011 and drawing a few lines, then saving it. No template used.On my computer with this file, I get the mouse cursor lag when I select a line.
I have a ListView control from where I drag items to Drawing area. Whenever mouse leaves the ListView Control and enters the AutoCAD drawing area, AutoCAD claims the mouse cursor back to Cross Pointer.
Is it possible to change this cursor during drag operation to a pointer with some attachment? As normally happened in Windows Explorer while dragging and dropping files among folders.
Is it possible to get the symbol preview sticking on mouse cursor while my own insert sketched symbol command is active? Is this a special cursortype or how to realize this?
View 4 Replies View RelatedWhen I click somewhere in the drawing I would like to show a dialog form next to my cursor.
surely cursor.position is not right. What is the right location for this form?
What happened to the option/enter command in the move object dialog that has been around since the early days of Illustrator??? Instead of having to mouse click the "copy" button in the move object window, one could just hold down option with Return or Enter and the Copy command would happen rather than a simple move. Immensely useful for prepress work!
View 2 Replies View RelatedIn PS CS4, my cursor position often "jumps around" in a very random way, the instant the mousebutton is pressed. For example, when using the brush tool, it will start drawing on a completely different place than the cursor was positionen when I wanted to start painting... The same thing for the lasso tool, etc... I use Vista home 32-bit, CS 4 with latest patches (as of 2009-04-14) and a standard cordless Microsoft mouse - nothing fancy. Mouse works in all other programs 100% of the time.
View 1 Replies View RelatedWhen I'm trying to select/move/do anything anywhere on my workspace (not the UI, the actual window where you model), the cursor is offset by about a centimeter. I've tried running as administrator/doing all sorts of compatibility things and resetting the user interface in Max. I've also tried changing various settings on my video card (power saving off and whatnot).
I'm running windows 7 64 bit, all drivers are up to date.
i dont know why but sometimes my mouse cursor changes to a cross hatch rather than be an arrow or circle? why is it changing and how can i get it back to like a circle?
its very annoying to paint or erase using the cross hatch as the exact area that will be covered is not shown!
I am finding some inconsistencies when using tools provided in Paint.NET.
For 2 examples, I'll simply describe the behavior of the Escape key.
-----------
Exhibit A:
I would like to use Text to type in some letters with different colors. What I would do is press T (shortcut key for Text), select a color, type a letter, press ESC, nothing happened, click somewhere else, click back to the letter, select a different color, type a letter, ESC, nothing happened, repeat...
After I'm done, I press ESC again with nothing happening, and press a different shortcut key to continue editing, like O (shortcut key for Line/Curve).
Exhibit B:
I would like to draw a circle and a line. After finish typing, I press O four times to use the Ellipse tool, draw a circle, and then press ESC. Nothing happened. Next, I press O once to use the Line tool, start drawing a line, and then press ESC. At this point, my drawn line is canceled for good, and I need to either use Redo to recover it, or redraw the line again.
------------
Here I present to you these two exhibits. Notice that sometimes, pressing ESC does nothing other than jumping back to cursor, and sometimes cancelling the action that was done.
Would it be possible if the Escape key has a consistent action throughout all of the tools?
I am running AutoCad LT 2014 and am experiencing an erratic cursor when using the move and copy commands. This only started to happen after a while of use and any resetting or restarting will not clear the problem. Instead of a smooth movement the cursor jumps.
View 1 Replies View RelatedThis is a incosistent problem, in which I cannot determine why it's happening and it doesn't happen all the time. I often restart Lightroom and it is ok after that.
Â
In a small area of the screen the curser doesn't function. I cannot select an image or anything in that area while in the library module and when in the develop module brushes change back to the arrow icon and don't allow me to click in that area.
Â
This is my first time using Lightroom and am currently using version 4.3 that I downloaded from the Mac App store. I am running a new MacBook Pro with OS 10.8.2 Mountain lion.
when I perform any operation in AutoCAD I have to move my mouse to see it complete. know what variable I'm looking to reset?
View 5 Replies View RelatedWe have installed autocad 2013 on windows 7 64bits VM (xendesktop 5.6 on VMWare Hypervisor) and the mouse move is very slow or the cursor stop and move again.
I have tried these tips without success
[URL]
I've relaunched and tried re-installing Illustrator CC twice and didn't solve this unexpected crash problem. It has never happened since I paid for this software months ago.
Â
Illustrator won't crash when:
- using the keyboard arrows to manually move any path or drawn shapes/ objects
- using my wireless mouse to draw objects/ new paths from clipboards, colour boards etc.
Â
Illustrator CRASHES when:
- using my wireless mouse and macbook's touchpad mouse to move any new or old drawn paths/ objects/ shapes/ lines etc.
Â
In my Opinion - ROOT OF PROBLEM:
- Wirelss and macbook's touchpad mouse cursor causees it to hang then crash 1 minute later.
Â
Why would my mouse cursor suddenly be the cause of this crash problem when it was working fine all along?
Below is the error message, I use this software to run my design business.
Â
Process:Â Â Â Â Â Â Â Â Adobe Illustrator [18899]
Path:Â Â Â Â Â Â Â Â Â Â Â /Applications/Adobe Illustrator CC/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator
Identifier:Â Â Â Â Â com.adobe.illustrator
Version:Â Â Â Â Â Â Â Â 17.1.0 (17.0.0)
Code Type:Â Â Â Â Â Â X86-64 (Native)
Parent Process:Â launchd [122]
User ID:Â Â Â Â Â Â Â Â 501
[Code] ....
On a previous computer I used Illustrator for, when I would draw or make selections, next to the cursor in a small black box with white text, there would be the dimenstions information. It was similar to what you'd find in the Window>Info panel but simplified and would let you know how big the selection you're making is. I've looked all over the Preferences and can't find it.
View 1 Replies View RelatedI just started using Inventor and I have this issue, that whenever I set a dimension in a sketch, the sketch doesn't update to the new dimension until I move my mouse/cursor. Is this normal? Is there any way to change it so it updates as soon as I hit the enter button (after entering a dimension)
View 3 Replies View RelatedOne of my co-worker has this problem with his cursor's crosshairs. When he moves his cursor the crosshairs are like blinking or sort of flashing. It's not that big of a problem but it's just getting anoying in a short while.
View 9 Replies View RelatedI just started experiencing issues with the PS CS6 Save for Web dialog window. It is very slow to respond to mouse clicks. I use Creative Suite 6 on Windows 7 Home Premium 64-bit with a Gen 3 Core i7, 12GB of ram and a 3GB Nvidia 670m video card so I know it's definitely not hardware related.
View 7 Replies View Relatedif you can customize / move tool bars & zoom in/out using mouse wheel with AutoCAD 2012 LT ?Â
View 5 Replies View RelatedWhenever i move my cursor over a 3D solid, outlines of the solid stay dashed.I tried changing the visual effect settings but it doesn't work.
it doesn't only do this in every view (top,side,front) but also when i'm panning around and hover my mouse over any solid. Using the regen command resets the solids so that they don't have the dashed outlines anymore.
whenever i'm panning around and i have conceptual view on, i have to switch from conceptual -> wireframe -> conceptual if i want the solids to look normal again.
When i click my mouse to draw the cursor moves up and to the left of the position i started which makes any and all editing impossible. Imagine trying to draw a line but the starting point is a half to a full inch up and to the left of where you wanted the line to start. I've tried a clean install even changed my mouse. doesn't do it it drawx4 only photo-paint x4.
View 14 Replies View RelatedI have a user that can't move or resize his xref dialog box. Â He is using dual monitors and has no problem with any other dialog box. Â I've tried changing settings for docking/hide.
View 2 Replies View RelatedI'm having a very strange issue with Photoshop CS5 (both 32-bit and 64-bit)
Â
When I go to draw anything or move anything, the canvas does not respond to mouse events at all. Right clicking doesn't work, dragging edges of the free transform box doesn't work, even the top menu bar (File, Edit, View, etc) does not detect when I mouse over from one menu selection to another (e.g. moving the mouse from "File" to "Edit")
I have a big problem with the viewport in 3ds max 2011/2012. On each viewport I have a black or white bars on right. these bar make the mouse become inaccurate for example when i want to select a vertex I can't drag the mouse on it and click. I have to move the mouse away from it a distance to select it (see my attachment image). I tried to update the graphic driver and the 3ds max 2012 SP1 but the problem's still there.
View 9 Replies View RelatedMy new photoshop Elements 11 opens off centered and won't move with my cursor (on a MacBook )why?
View 2 Replies View RelatedA friend of mine got a new computer with Windows 8 (64).Intel Core i7-4770, NVIDIA GTX 645...Now he has installed GIMP from GIMP-org Everything works well, but it can not rearrange the layers with the mouse.Even he can not adhere Register to other docks with the mouse. He also tried it with GIMP Portable and Partha GIMP Portable (64) with the same effect.
View 11 Replies View Related