Photoshop Elements :: Won't Move With Cursor
Sep 9, 2013My new photoshop Elements 11 opens off centered and won't move with my cursor (on a MacBook )why?
View 2 Replies
ADVERTISEMENT
Photoshop Elements :: How To Move Cursor Digitally Not By Hand Motion
Nov 15, 2012For cropping part of an image, the cursor virtually snaps to positions according to what the programmer sees in the image. Maybe not always, but that is the way it seems to me in many cases. Even when it does not do so, I find it impossible to move the cursor in very tiny increments by using my mouse. If I were to greatly enlarge the image on the screen to get finer control, then only part of the image would fit on the screen. I want a technique for controlling the selection with as much fine precision as is available when resizing, for example. We can specify hundredths of a millimeter when resizing; very finely precise indeed.
Is there a technique that I can use to have very fine and precise control of a crop, preferably by specifying a movement left-right-up-down using decimal fractions of a unit of distance? The same question applies to using the selection tool.
Photoshop :: Marquee Tool To Select Area And Move It Using Cursor Keys
Aug 9, 2011I have used the marquee tool to select an area and moved it using the cursor keys. Now I want to drop it/commit it even when I hit enter I can't seem to get rid of the marquee flashing surround.
View 4 Replies View RelatedPhotoshop :: Use Clone Stamp Tool / Entire Image Is Dragged With Cursor / As Move It
Jul 8, 2013when I try to use clone stamp tool, the entire image is dragged with my curser as I move it. I reset to defaults to no avail.
View 2 Replies View RelatedAutoCAD LT :: Erratic Cursor During Move
May 9, 2013I am running AutoCad LT 2014 and am experiencing an erratic cursor when using the move and copy commands. This only started to happen after a while of use and any resetting or restarting will not clear the problem. Instead of a smooth movement the cursor jumps.
View 1 Replies View RelatedAutoCAD Civil 3D :: Move Mouse Cursor Out Of Dialog
Apr 29, 2012am experiencing display problems with Civil 3d 2012 on my Hp Elitebook laptop, when i open surface properties and go to styles dropdown menu i get empty dialog but if i move mouse cursor out of the dialog they appeared the same issue appears on other dialogs. I installed c3d 2013 trial still i get same problem. I installed autodesk certified driver same problem.
View 7 Replies View RelatedPremiere Pro :: Move Timeline Cursor From End Of One Clip To Start?
Mar 28, 2014I'm a FCP person who has gone to premier cc because I dont like the new ver of FCP which seems to be imovie on steriods. How do you move the timeline cursor from the end of one clip to start of the next. In FCP ver 7 it's a simple button.
View 2 Replies View RelatedAutoCAD Inventor :: Dimension Doesn't Change Until Move The Cursor?
Jun 19, 2012I just started using Inventor and I have this issue, that whenever I set a dimension in a sketch, the sketch doesn't update to the new dimension until I move my mouse/cursor. Is this normal? Is there any way to change it so it updates as soon as I hit the enter button (after entering a dimension)
View 3 Replies View RelatedAutoCad :: When Move Cursor Crosshairs Blinking Or Sort Of Flashing
Jan 24, 2006One of my co-worker has this problem with his cursor's crosshairs. When he moves his cursor the crosshairs are like blinking or sort of flashing. It's not that big of a problem but it's just getting anoying in a short while.
View 9 Replies View RelatedGIMP :: When Move Mouse Over Image - Brush Cursor Is Not Moving?
Sep 17, 2013When I move my mouse over my image the brush cursor is not moving and it will not let me click on my image (with the mouse) the crosshair/cursor will follow it, however the brush will not, nor will any other tools, my wacom tablet however works fine.
I thought it must be something to do with GIMP accepting input but its not going as of yet.
AutoCAD 2013 :: Whenever Move Cursor Over 3D Solid - Outlines Stay Dashed
Dec 19, 2013Whenever i move my cursor over a 3D solid, outlines of the solid stay dashed.I tried changing the visual effect settings but it doesn't work.
it doesn't only do this in every view (top,side,front) but also when i'm panning around and hover my mouse over any solid. Using the regen command resets the solids so that they don't have the dashed outlines anymore.
whenever i'm panning around and i have conceptual view on, i have to switch from conceptual -> wireframe -> conceptual if i want the solids to look normal again.
AutoDesk Smoke :: Cursor Offset In Action (Grab And Move Axis)
May 3, 2013I go to grab an axis and move it, and the cursor is offset. See the movie.cursor_offset.mov
View 1 Replies View RelatedPhotoshop :: Cursor Change From Current Tool To Move Tool
Jul 31, 2013When I have a none vector tool active for example the brush tool and I press and hold the Ctrl key down I see the cursor change from the current tool to the move tool cursor. If I presses and hold the Alt key I see the cursor change from the current tool to the eyedropper tool. If I press and hold both the Ctrl+Alt keys a see a cursor icon change to an icon that has two up pointing Arrow heads one Black the other White. What tool is that cursor for? It seems to copy and move the current layer and move its position over the canvas.
View 11 Replies View RelatedLightroom :: Cursor (Pointer) Showing As Hand (Move Tool) Instead Of Pointer?
Jan 10, 2014How do you change the characteristic of the cursor from Hand (Move Tool) back to just being a pointer? This condition only exists in the Develope Module when my cursor is placed over the top of the photo. When I move it off the photo it returns to a pointer. In the Library Module it is always a pointer like I like it to be.
View 2 Replies View RelatedPhotoshop Elements :: Change The Cursor In 8?
Apr 21, 2013How do I change the cursor in Photoshop Elements 8? When I am using a tool, I get triple cursors. How can I change the cursor?
View 1 Replies View RelatedPhotoshop Elements :: Cursor On Tool Is Blur
Dec 15, 2013I am using Windows 7 Professional 64. I have disabled my virus protection. After several minutes installing I get the messgae: Adobe Photoshop Elements 9.0.3 Update.Patch cannot be applied. Please contact product support. But there dioes not appear to be any address to contact support. The cursor on my tools is a blurr of severl + signs and other nondiscript items.
View 2 Replies View RelatedPhotoshop Elements :: 9 - How To Get The Cursor To Be Pointer Arrow
Feb 27, 2013When I'm working in an image, and in other places, the cursor is a horizontal series of symbols rather than the pointer arrow I'm used to in PSE 6, 10 and 11. The left side of the symbols is where the cursor is at.
I don't know what this is about, and don't care. I want the pointer arrow I'm used to. I've looked in Preferences but see nothing that applies. How do I replace these hard to use and irritating horizontal symbols with the pointer arrow?
Photoshop Elements :: Three Images On Cursor With Certain Tools?
Dec 15, 2013I am getting 3 images on the cursor when clicking on certain tools (magnetic lasso, eg.) How can I get back to one image?
View 2 Replies View RelatedEdge Animate CC :: Use Touch Start / Touch Move / Mouse Down / Mouse Move To Move Elements?
Dec 22, 2012How to use touch move and mouse move events events to move elements n edge?
View 4 Replies View RelatedRevit :: Move Cursor Across Various Views Doubles Views
Nov 19, 2012Since the end of Aug. 2012 I've been making families for a manufacturer. I left Friday evening with good families. This morning I am finding all the families I checked with a problem.
When I move the cursor across the various views it doubles the views. Rolling the mouse wheel one click either way to zoom in or out cleans the view but on the next time the cursor goes across the view it doubles it again. Now there are 4 views overlapping each other. The next time it is possibly 8, and so on. It is difficult to count them because they are overlapping but it looks like they are doubling each time.
The software is Revit Architecture 2011 and the computer is a Dell Precision T3500.Are the families corrupted or is it the computer? Is there a toggle I hit that I shouldn't have?
Photoshop Elements :: Cursor Change In Paint Bucket
Oct 1, 2012I’m getting a strange cursor when I use the Paint Bucket tool. Instead of the bucket with the pointy bit to show where you’re aiming, I get three tiny paint buckets in a horizontal line, looking a bit like a fragmented ruler, so it is impossible to see where the point of the paint bucket is. I have used CAPS LOCK to get the crosshairs but would refer the normal setting to be available too.
I have shut down the PC and restarted with PS9 as the only app open but I still get this funny cursor. Some of the cursors from other tools are also affected, esp. when I left-click.Have I changed a setting by accident?
Photoshop Elements :: Cursor Will Not Show The Brush Size?
Sep 1, 2012My cursor will not show the brush size any longer and making changes to my preferences seems to have no effect.
View 1 Replies View RelatedPhotoshop Elements :: Cursor Jumps To Random Positions In 8
Nov 19, 2011I use Adobe Photoshop Elements Version 8.0, and I use Windows 7.
The problem: Whenever I use any tools involving the usage of the mouse on the canvas, everytime I click to use the tool, sometimes the cursor seems to 'jump' out of position and I end up unintentionally putting paint on the wrong part of the canvas. And before I release the click, I try to move the mouse around in random directions to no avail; the mouse doesn't respond until I release the mouse. In another similar case, sometimes for a split second the cursor seems to move on its own and it leaves behind a random trail of color. Example: Let's say I wrote down my name 'Andrew' on the canvas. I end up something similar to 'Anc e.", along with a black dot/calligraphic stroke or two unintentionally placed when writing down my name. I had to undo and click several times until I properly got the tool working. I'm working on a certain project in PS
I'm guessing a part of my bare hand is just barely in physical contact with the touchpad?
Photoshop Elements :: Changing Image Size With Cursor?
Nov 10, 2012How can I train Photoshop to change the image size of a photo when I pull daigonally on a corner with the cursor?
View 1 Replies View RelatedPhotoshop Elements :: Creating New Layer - Cursor Does Not Activate
May 18, 2013i cannot open create new layer in elements 9 the cursor does not activate
View 1 Replies View RelatedPhotoshop Elements :: No Icon Showing The Type Of Cursor
Sep 27, 2012In addition to no icon showing the type of cursor (Standard or Precise) w/in PSE some cursors diplay as tripple symbols of the selected tool. For example, if the Crop tool is selected three pictures of the Crop tool display as the cursor. I have tried the Control-Alt-Shift reset w/o success.
View 1 Replies View RelatedPhotoshop Elements :: 8 - Flashing Cursor With Waiting Circle
Feb 18, 2013I recently had to reinstall my OS (Win 7 64 bit) and after doing the same to my photoshop program, I now get a flashing cursor that changes to a waiting circle. Other post talked about DPI and Java, which I have checked and still have the same problem. I've had the program installed on the same computer without this problem, and the setup is the same with the usual update in drivers.
View 17 Replies View RelatedPhotoshop Elements :: Cursor Doesn't Change To A Circle When Using Eraser
Dec 4, 2013Cursor does not change to a circle when using the eraser.I'm sure it must be a tick box somewhere.
View 1 Replies View RelatedPhotoshop Elements :: Change Tool Cursor From Gun Sight To A Circle?
Apr 21, 2013Usually the tool cursor is a circle the size the tool is set to, that is, it will be 60 pixels in diameter when the tool size is set to 60 pixels. Sometimes, the tool cursor changes to a gun sight-like icon. I have no idea what I'm doing to cause that, but I'd like to know in order to 1) stop doing it, and 2) maintain my sanity.
View 4 Replies View RelatedPhotoshop Elements :: How To Get Rid Of The 3 Figure Cursor When In Rectangle Select Mode
Jan 25, 2013How do you get rid of the 3-figure cursor when in the rectangle select mode?
View 2 Replies View RelatedPhotoshop Elements :: How To Move Elements Of Painting To Separate Layer
Nov 24, 2013I would like to move elements of that painting onto a separate layer. What is the best way to do this? An example of this would be a painting with the moon in a night sky. I might want to move that moon object into a separate layer.
My reason for wanting to do this is I want to change the background of the painting without worrying about doing fine details around the objects I am moving. A second benefit of moving the objects to a layer is that I can then easily move the location of those elements in the painting around, trying to reposition them.
can I get all of the elements I am moving onto a SINGLE layer AND still have the ability to move those elements around separately? If I want to move 10 elements in a painting to a separate layer, it is REALLY inconvenient to have to put those into 10 separate layers and constantly maintain naming of these different layers.