We have started to deploy AutoCAD 2011 64 Bit on Windows 7 64 Bit machines and have come across an issue where when opening or saving files across a Cisco WAAS accelerated network that have referenced images takes a lot more time than drawings that do not have attached images. We have updated graphics drivers to the most recent certified driver from the autodesk site as well as disabling Aero and all the other Windows 7 tweaks to no avail. The files with images still open/save much slower than those without.
Autocad 2012 was working fine until a week ago when it started taking a long time to open drawings--even search for drawings on our network. It also takes at least 30 seconds to save files, where it used to take 5 seconds at most.
I found the AutoCad 2012 and AutoCad LT 2012 SP1 Ribbon Hotfix, which sounded like my problem, but it is for Product Version F.107.0.0 and I have Product Version F.51.0.0.
I am having an issue when opening and saving files is very slow when I have a project active in the Project Navigator.
If I have an active project, and I open a file via Project Navigator or Windows Explorer, the process hangs for 15-20+ seconds at the 'Opening C:xxxxxxxxxxxxxxx.ac$' point, where it is creating the temporary file.
If I 'Close the current project' in the project browser and open the same file via Windows Explorer, the process takes less than a second.
I have CS6 installed on a Mac Pro desktop, 3.3 Ghz machine, 6 Gb RAM, running OS X Mountain Lion. Everything is running fine, updated and it's a great machine. But I've noticed that opening Photoshop files that are somewhat large and layered take WAY too long to open or "save." I mean...3 minutes is much too long to wait.
I have a spare physical drive configured (in preferences) for extra RAM, with plenty of empty drive space. The startup drive has well over 250 Gb of space remaining.
The only applications running are Photoshop and Bridge. There is 6 Gb of RAM to run these applications and open files. OpenGL is checked in Preferences and I'm running an nVidia graphics card, as well.
My 8 core 2.8 GHz Mac Pro has 10 GB RAM and a blank 100 GB scratch disk. Photoshop is always quick. Has been for years. Suddenly today, Photoshop is slow like molasses to open & save files. Lots of progress bars and wait cursors. Everything else on the Mac is fine. It boots quickly & normally, and other apps are happy. My boot drive, a clean installed Mountain Lion system, says S.M.A.R.T. Status: Verified. In Activity Monitor, a process with ID # 0, Kernel Task, was using 700 to 800 MB RAM, while another process, mds, with ID # 44, is using 350 MB RAM.
I should add that I booted from a backup system and its copy of Photoshop was also doing the same thing. In addition, a high level troubleshooter on Apple Discussions informed me that my present level of 500 MB RAM for Kernel Task is normal. So all I know is Photoshop is suddenly slow.
I work in a print shop that prints biggish stuff. I will frequently have files that postscript to close to a GB or more. Working on simple vector art with a few images in CC is not too much of a problem, but I still notice CC is slower than CS 6. The big problem is when I get a few 200mb PDF's, or files with layers of transparent PSD files in them etc, big busy files, then AI CC really bogs down, or frequently crashes altogether. CS 6 is MUCH better. I don't have the font issues, AI CC works fine with simple files. Saving & opening these big files is such a problem, I just save them back to CS 6, but that causes problems too, I do not want to, nor should I have to have 2 versions open at the same time.
I always try to optimize the files as best possible, but it is tough sometimes as they R supplied by the customer, and the time it takes. We save to a Windows Server 2008 R2 box over gigabit network, which I know is not best practice, but no choice with the sheer volume of files. Would B insane to try to keep track & copy them back & forth, and it was never a big issue with CS 6. I am the first victim in our office, but the other 3 Mac Pro's will B switching over to CC this week, and I know the operators will B crying.
I have recently installed Corel X6 and have found it to be painfully slow when opening files. At first I had thought it might be a network issue so I copied the file to a local drive and experienced the same problem.
The file is only 819Kb but it takes about 3 minutes to open the file. When I first select the file in the File Open dialogue window Corel just hangs for about 1 minute. It finally responds then takes a further 2 minutes to process and open the file.
I have turned off my antivirus software as I thought this might be a file scanning issue but still the same result.
I have loaded about 10 pictures in the editor of elements 10. I want to save them to an sd card. When I try to do that it tries to save all of my pictures instead.
I'm having a problem throught CS6 with the Open, Save, or Save As dialog boxes not opening for a period of time after clicking on the desired functions. It can take over a minute just to get the Open dialog box up to browse for a file. Eventually, the dialog boxes open, but during the time that it's trying to open, the program is unresponsive. It is happening with all of my CS6 programs. I have unistalled and reinstalled with no fix. The programs are updated.
I noticed that save a drawing with a big number of db takes a lot of time, i checked with several computers, i monitored the cpu, memory hard disk and they don't getting to limit or nearby, i checked with proces monitor and found a lot of writes, look at the file, with ssd its the same, what can i improve in hardware to save faster?
i have big problem to save in Autocad 2011, then we save in 2007 DWG format it takes up to 3-4 min even local this problem exist, reinstalled i computer totally clean, no antivirus just windows 7 and updated,even disabled fidelity. then i save in 2010 format it goes fast.
The company I purchased AutoCAD 2012 Electrical from had no answers and referred me to Autodesk. Autodesk has told me I have to just live with it because they have no plans to fix the problem, even though they recognize the issue. So I turn to the largest user group I currently have access to.
When I print a drawing, regardless of page size, that contains and image, I have to wait upwards of 10 minutes before the printer sees the drawing and begins to print. The clients I work with use quite a few drawings that contain images and I have days where all I am doing is printing jobs because I have to wait so long.
I have tried to change the print drivers. The printers I use are HP Laser M5035. I connect to them through a network however I have tried to connect to them directly with the same results. The only thing I have found to speed up the proccess, which i find to be rediculous, is to print the job to PDF and then print the PDF to the printer.
I have had the AutoCAD retailer's technicians as well as the Autodesk technicians log into my computer remotely to fix this issue and both recognized the same issue but after a month of trouble shooting I am still at square one.
Before I upgraded to AutoCAD 2012E I had AutoCAD 2009E and printing drawings with images was not nearly as bad. If I did not have to have AutoCAD 2012E I would revert back but this is not an option.
I have the student version of AutoCAD 2012 on an HP laptop with Windows 7 Home Premium OS. I originally installed AutoCAD in June of 2012. It worked fine for 9 or 10 months but now whenever I select File/Open, File/Save, or File/Save As, AutoCAD stops responding and the spinning blue donut appears. AutoCAD never comes back and I have to close it from Task Manager. I uninstalled AutoCAD and reinstalled it, and the process went smoothly. However I still have exactly the same problem with the File operations. I apply Windows updates, but other than that have not made any changes to the software on the laptop. AutoCAD works fine for everything except the File operations. I am able to save with CTL/S and am able to open AutoCAD files from File Manager.
I am using Autocad2014. I have had issues with two windows7 64bit machines where using the file open dialogue (network file) has an 8 second delay to open the file. If I open using recent documents(in cad) or windows file explorer to open them, there is no delay. Moving the file to the local machine stops the delay, but removing XREF's did not.
First of all a little bit about the hardware/software:
- Windows 7 Enterprise 32 bit
- ACAD2011 with 1.1
- Nvidia GeForce 8400 GS (not a supported graphic card from what I know)
- Intel i5-750
Since we got that out of the way let's get to it.
A week ago I was told that a lot of times the PC's freeze when you try to "Save", "Save as" or "Open" a file (we open/save on a network drive). If that happens we have to restart the PC and hope it doesn't happen again, but since this happens quite a lot (over the course of four days about 27 times on 7 PC's) I tried to fix this.
I installed the patch, updated the drivers for the graphic card and reinstalled NET Framework 4. The problem didn't occur as often but it still happened sometimes.
I have problem with save for web in PS CS5 (12.0.1). It is extremely slow. For example selecting anything from menus takes couple of seconds. I deleted PS preferences files but that didn't work.
am running PS CS2 on a very hi spec win XP machine
everything else in PS is running super fast - but when I "save for web" there is a fixed delay of about 5 seconds while the file location dialogue box comes up (even for small images).
I am having an issue in Save for Web where the .gif animation preview works very slow and choppy. I am an advertising designer and many times I need to work on animated .gif banners. I am working with Photoshop CS6. When I play the animation in the frame timeline the animation speed works as intended, a little choppy but the timing isn't too bad. However when I go into the Save for Web screen and play the animation it always appears a lot slower and looks choppy. Anything se to 0.0 or No Delay runs as if its set to .1 seconds. Now if I export the file and open it in Chrome the animation speed seems to go back to normal. This wasn't always the case, I tested this 2 or 3 months ago and the animation speed in the export was also slow and choppy but it must have been fixed in one of the updates since then.
My issue is I don't want to have to preview everything in Chrome after I export it, and then possibly have to go back and tweak it then save again, preview again etc. I have never encountered this issue in previous versions on Photoshop or other machines. Ususally my experience has been the opposite, the frame timeline has always been slower, but previewing in Save fro Web has shown a pretty accurate preview.
I also have a HP laptop running Windows 7, photoshop CS6 and I don't encounter this issue at all. Default answer on all of the forums is "different browsers handle .gif animation speeds differently, etc.." but int he past I have saved a .gif on my mac and it was slow and choppy in the Chrome, then I saved the same file on my PC transfered it back to the mac and previewed in Chrome and the animation played quickly and smoothly.
I can't see it being a hardware issue because the machine I am using is farily new. iMac Late 2013/2013, 3.4 Ghz Intel Core i7, 16GB RAM, NVIDIA GeForce GTX 675MX 1024 MB, running OSX 10.8.4 Mountain Lion.
Could it possibly be a setting or preference that needs to be changed? As I stated above it seems that now when I export the animation works fine in the browser the preview is just slow.
I've got a lot of scenes that have become exceedingly slow to save and load. Like often taking 10 to 20 minutes to save. With looming deadlines this is becoming really desperate! I've tried merging into a new scene, running scripts to clean out notetracks etc. Even after deleting every object and material, and resetting all render settings, the file is still inexplicably slow. See attached example.
I downloaded successfully, installed CS4, registered and it is activated. My only problem is it takes a LONG time for CS4 to open. From the time you double click the icon, it seems like it takes forever before the blue box pops up, then it takes longer than CS3 to get to the open program. As far as I can tell, I have the same settings for both programs but CS3 beats it hands down for speed to open. I am running 3 gb of memory, an Intel Quad 4 processor, and lots of disk space.
Once i apply my presets on raw images in camera raw i click to save all of the photos as JPGs. At the begining the saving takes 1.5-4 seconds per image. After saving for a while computer slows down and it takes almost 10 seconds to save one image.
It took more than 10 hours to save 4000 raw images as JPGs.
Tech Specs: Photoshop CS6 x64 Windows 7 ACPI x64 based PC Intel i7 3.40GHz Sata AHCI controller NVIDIA GeForce GTX 560 Ti Samsung SSD 840 Pro 256GB
I just recently upgraded from WinXP64 to Windows 7 Ultimate 64 and everything is good… aside from the fact that everytime I save the files, it is realy slow
I never had this issue before (although when I think about it, I used to work on another Win7 station a few months ago and I had the same issue)
I think the reason is OS related as everytime I click on save, it “re-creates” the file from scratch… This is not much of a problem on small files… but I have scenes that are over 500MB each and it takes forever to save everytime (not that the scene unreliability is not enough!!!)
I am working on six very similar map documents. They all are moderately complex with layering, drop shadows, and some placed raster files. I have linked rather than embedded the big tif raster files.
The confusing thing is that some of the illustrator files save in 2 seconds, and some of the files save in 2 minutes.I have compared all the settings, and I don't see what I'm doing different on the ones that take a long time to save. All big placed files are linked, not embedded.
The only clue showing a difference is that the files that are taking a long time to save are about 200mb in size. The files that are saving quickly are about 1mb in size.
The problem is that opening files is painfully slow - having read about the issue with network printers (which I don't have) I have deleted everything listed under printers and re-installed the only printer that I have (which is locally attached via USB, but I deleted it in case Adobe thought is was a network printer). I have tried to create a generic printer (as recommended by Mr Joslin to jangel2 uRL.... but the installation failed and no additional printers were visible in control panel/printers.
I am running Windows 7 on a Dell desktop, with plenty of memory etc. I have a number of external hard drives, and have turned all these on so Photoshop can find them in case it's looking, but this made no difference.
I just dropped a very large sum of $ to purchase CS4 Extended and the #$*@# thing is taking over 5 minutes to open!!! (Yes, I've timed it.) Once open it appears to run fine, although I've yet to put it through it's paces much. The obvious answer would be that I have an undersized slow computer. However, that is far from the case. I have a brand new Dell laptop with plenty of 'horsepower', much more than the system requirements listed on the outside of the box. It does the same thing with both the 64 bit and 32 bit version.
Here are a few of the "vitals" on the laptop:Operating System: Windows Vista 64-bit Version: 6.0 Service Pack 1Processor Core Duo2: 2493 MHzVideo Card: VIDI GeForce 8600M 250MB GT/PCI/SSE2Built-in memory: 4093 MBImage cache levels: 4Hard Drive: 500G
I've recently updated to 2.8.6. I've noticed that opening files is extremely slow. Once the file is open it works fine, but it takes way too much time, even just opening folders. I use the program for photo editing.
When I hit the save for web menu item it can take 5-30 seconds for the dialog box to launch (cs6). Seems that cs6 is doing some heavy disk activity but not sure what its actually writing or doing but I have a fast machine with lots of memory and plenty of CPU yet I get these VERY long delays. All I can find on this problem is that people had suitcase instaslled and I do not. So how I determine what is going on so I can stop this.
problem with loading large numbers of images, not large images, but a lot of images in VS11. I am loading a lot of images to make my annual slide show for the HS band and I am running into a problem where the images start loading quickly (1 second each) and after about 150-200 images you start to load slower and slower as much as 70 seconds on image #300). I don't remember having this issue with VS9, which is what I used last year.
I tried loading the same thing in VS10 and it is much better on the load. There is a recognizable slow down, but nothing like VS11. Before you ask, I would be fine with doing the slide show in VS10, but running in Vista VS10 crashes on me too much to get it done.
