In CS5 Bridge I want to see the exposure speed immediately for any chosen picture. So I choose exposure plus exposure correction in Bridge presets.
But after starting my PC the next time, this setting is automatically brought back to "exposure mode" plus "exposure index", which has the effect, that Bridge once again doesn't show the exposure speed (1/30 or 1/100) for the photos. What to do???
installing Camera raw presets from USB Stick. I am attempting to install the Camera Raw Presets. It says to put them into User Name/ Library/Application Support/ Adobe/CameraRaw/Settings...When I get to CameraRaw the ONLY folders in there are Camera Profiles & Lens Profiles. I have searched everywhere looking for a CameraRaw-Settings folder and cannot find one. I have latest version of Camera Raw installed and still no settings folder. I even attempted to find it by looking in camera raw where it has saved the custom settings I made as presets and it shows that they are saved but will not show me where. I am using CS5 specifically Photoshop v12.0.4 and Bridge. I have Lightroom 4. I have iMac OS 10.7.3...Do I need to reinstall Camera Raw and how do you do that? Will I then lose my presets that I made in CameraRaw?
View 2 Replies View RelatedI want to save presets for brightness/contrast and the smart sharpen filter. I need to edit over thousands of images but I am tired of having to set the same presets manually for each image.
Basically, its just the brightness/contrast and the smart sharpen filter that I use to edit the images. You can save presets for other filters but I couldn't find a way to save the presets for these filters.
Every time I reboot, all of my tool presets are lost:
Brushes, dodge and burn tool, smudge tool - all
revert to default settings. Sure, there is a Save Tool
Presets in the tool pallet but do I really have to
reload my tool presets every time I reboot?
i just bought the new LR 5.0 (now upgrade) - now i want to save all of my presets within my old LR 4.4 (not just the cataloge) and load them into LR 5.0, so everything is how i know and need it.is there a way to do so?
View 3 Replies View RelatedWhen trying to print in Elements 11, after clicking "Print/Page Setup/Presets/Show Presets", the box freezes. Clicking Cancel or OK does not work. I then have to Force Quit Elements to clear it. Apple say that it is a problem with Elements. Using the same procedure in other applications, clicking Cancel or OK does work.
View 8 Replies View RelatedI am using photoshop CS on a mac. What I tried to do for ages now is change the fact that whenever I want to save an image the default setting photoshop is set to is it's .psd format. I need to save a lot of images as .png and i'd like photoshop to recognize that. So how would I be able to change??? Any ideas would be great.
View 1 Replies View RelatedIn camera RAW, to save a JPG you click on the 'Save image...' dialogue and another window opens with the JPG options. To skip this window and directly save the image, you hold down the ALT key and click on the 'Save image'. Is it possible to reverse these settings, so that if you want the JPG dialogue to open you have to hold down the ALT key and to save without the dialogue, you just click on the save button?
View 3 Replies View RelatedI have Photoshop 10.0 (Windows XP) and use it to edit my photos from my new Nikon D300 camera. I create and maintain my images in JPG format as a preference and have no plans of saving in RAW. My D300 includes 40 to 50 camera info/metadata elements including the camera and lens settings at the time the photo is taken. When I do a simple "Save As" in Photoshop 10 to a new JPG file (whether image adjustments are done to the source image or not), the new JPG file is stripped of about half or more of the original camera-specific metadata elements. Is there a Photoshop setting or Nikon/Photoshop plug-in that will force the software to preserve/retain the original metadata? (The Capture NX2 solution is not an option as the one key feature I use is Auto Levels - The Auto Levels feature in Capture NX2 washes out my photos to an undesireable state). Therefore, I need to continue using Adobe for the benefit of their better Auto Levels feature and I also use their automation heavily as I process 100's of photos at a time. The only drawback of Adobe right now is they discard most of the camera specific shooting data at the time of save. RAW is not an option as the file sizes are too large for my storage, sharing and usage needs.
View 1 Replies View RelatedI am having trouble getting my presets to show up under presets on the left hand side of the screen. They are still in develop presets but there not showing up and Ive tried deleting them and adding them again then closing out of lightroom 4 and going back in but I can not seem to get them to show up again. I must have hit something but there not showing up again
View 2 Replies View RelatedOnce i apply my presets on raw images in camera raw i click to save all of the photos as JPGs. At the begining the saving takes 1.5-4 seconds per image. After saving for a while computer slows down and it takes almost 10 seconds to save one image.
It took more than 10 hours to save 4000 raw images as JPGs.
Tech Specs:
Photoshop CS6 x64
Windows 7
ACPI x64 based PC
Intel i7 3.40GHz
Sata AHCI controller
NVIDIA GeForce GTX 560 Ti
Samsung SSD 840 Pro 256GB
I have recenty had to reinstall all my software, and manged to find most of my old Lightroom settings in the Lightroom Presets folder (inside the Appdata folder on a PC) but I seem to have lost my custom tone curves.
Do you know which folder they should be in (indise the Lightroom Presets folder)
I STILL don't understand why there are TWO comminty forums for Lightroom;
I have opened a jpeg as Camera Raw (7.3) and adjusted it and wanted to save it as jpeg, but the only option is *.dng?
View 3 Replies View RelatedCamera Raw takes almost 2 seconds to save 103MB tiff file. (I use Photoshop CS6)When i save a bunch of tiff files, camera raw uses only half of my CPU and half of my RAM. In addition, I use SSD that writes 530MB/s outside Photoshop. According to these specifications it should save 5 images within one second. But it doesnt.
View 12 Replies View RelatedI created a 3d object in AutoCAD 2012. Set a camera at desired location.
Then switch to paper space, created an mview and set the camera view, then added some mtext and dimensions. Locked the display view, save my work and close AutoCAD. Now here's the exciting part. i re-launch AutoCAD and open the drawing. The drawing was messed up. It does not display the correct camera view that was previously saved. It sounds strange but I do it over and over and same thing happens.
Is there any way Lightroom 5 can save the information from my Nikon Cameras RAW file.
When I open my RAW files in Lightroom 5 all my camera settings are not saved.
Is there some way around this.
How do I set Camera Raw preference to: Save image settings in: Sidecar ".xmp" files?
View 11 Replies View RelatedCan't open file from Nikon D7100 in Camera RAW Plug-In,i have Photoshop CS5 and plugin is upgraded.Format NEF from Nikon D 7100 is not in this plug-in photoshop.
View 2 Replies View RelatedI am using Photoshop Elements 11, using WIndows 7 Operating System. I have a new camera Canon Rebel T5i, and having problem viewing images in raw format (cr2).Message in PE11, states, "Camera model not supported by installed version of Camera raw."
Canon software views images. Suspect my minimum camera raw plug in version does not support this new camera..I am unable to locate in the software any menu item that allows me to view the camera raw plug in version.
Have no choices in the camera calibration tab inside camera raw plugin. Use CS3 and Raw 4.6. Are choices only available in later version or PS? Also in Raw preferences choice for camera serial number and also setting as defaults. Where to enter serial number etc.
View 1 Replies View Relatedmy PSE11 was working fine until i bought a new camera and tried to upload photos from my RAW files. It gave me this message
"Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.Please visit the Camera Raw documentation for additional information."
so i tried to install the update.... installed it fine, kept getting the same message when i would try to open the photo. after researching online i found the suggestion of uninstalling and reinstalling photoshop elements. i did that once, tried the update again...same results. uninstalled again. tried the update again and still getting the same message. ive checked the adobe website and everywhere i look says the version of the camera raw DOES support my camera (nikon D7100).
After an, automatic, update to camera raw 7.3 in Photoshop Elements 11 all Camera Profiles are gone. All that is left is "Matrix". I use Elements 11, windows Vista on a 64-bit machine, my camera is a Nikon D7000.
View 2 Replies View RelatedI own a GoPro Hero 3 Black camera. I saw the Russell Brown demonstration of Camera RAW to correct lens distortion (
[URL].......
In this instruction, he takes images into Camera RAW and selects a tab called Profile, and it automatically detected the camera from metadata and made corrections.
I was sold, subscribed to Adobe Cloud, downloaded Photoshop and started following his tutorial. When I got to the lens correction part, my Camera RAW has no Profiles tab. Brown does say that you need the latest version, but I have assumed that since I just subscribed and downloaded, that I have that.
how can i create a camera profile with camera raw without x-rite or other third software?
i have a Colour Checker ,with different shade of gray and different colors
i remember about a script or something like that
i google a lot , but without luck
can i create my camera raw profile using a color checker with photoshop acr ?
i'm not sure but this should be the script [URL]....right? but i don't know how use it
is there a tutorial ? maybe a video to create a profile with camera raw.
For some reason when using the path option in inventor studio for camera animation the camera rolls for no reason?? I have created two helical curve sketches around my product, the outer curve is the path for the camera and the inner curve is the path for the target. Both curves are the same height and have 1 revolution. When i play the camera it works out fine untill it hits 1/4 of the way through and suddenly flips 180 degrees so now the camera is upside down, once it hits 3/4 of the way it flips back again to the correct rotation. If i dont create an inner curve for the target and place the target directly in the centre of my product with no path to follow the camera spins all over the place when it follows the curve.
View 9 Replies View RelatedI don't know how to phrase it correctly but the 3d camera tracker inside of After Effects will only apply key frames to the null object. This causes the footage to rotate around itself.
View 4 Replies View RelatedI shoot photos with a Nikon D2X and my wife uses a Nikon D70. If I open a D70 raw file, and then go to camera calibration, the profiles available are for various standard profiles and D2X profiles. The D70 profiles do not show in the drop down list. All of the profiles have been downloaded, from Adobe, and installed.
If I open a D2X raw file, the standard and D2X profiles are shown in the dropdown box.
Have I missed something in the installation? Do the profiles have to be loaded somehow?
I'm an amateur moving up to LR 3 and have been trying to learn this program by reading the LR3 book by Scott Kelby. He shows that the Camera Calibration feature has some settings for specific cameras yet the drop down menu has none listed. I've upgraded to 3.6 and the images were copied from raw to DNG.
View 6 Replies View RelatedI am relatively new to Lightroom. I have imported Panasonic Lumix DMC-FZ200 raw (.RW2) files into Lightroom 5.3. When I go into the Develop module under the Camera Calibration the only profile that shows up is Adobe Standard. My camera is supported according to the Adobe web site.
View 2 Replies View RelatedI am working on a project where I am incorporating 3d text into a shot with an onscreen talent speaking to the camera. I am trying to get the text to only move when the camera moves such as a pan or a hand held shake, making it look like it's part of the environment. It will track with the camera and looks great until my talent /subject moves, then the text moves with the subject. What am I doing wrong in my tracking? I have looked up tutorials and articles searching for others who have had this problem and cannot find anything that replicates my issue. Every tutorial I've seen does the same thing with fantastic results but I can never get the text to not move with my subject.
View 2 Replies View RelatedI lost my PDF Presets (CS6) so when I try to save to a PDF format, the std presets are not there. How do I reload them? I previously created a custom preset when building a book for Create Space and that is the only preset there - & I have not used this since.
View 2 Replies View Related
