Photoshop :: Installing Camera Raw Presets From USB Stick
May 7, 2012
installing Camera raw presets from USB Stick. I am attempting to install the Camera Raw Presets. It says to put them into User Name/ Library/Application Support/ Adobe/CameraRaw/Settings...When I get to CameraRaw the ONLY folders in there are Camera Profiles & Lens Profiles. I have searched everywhere looking for a CameraRaw-Settings folder and cannot find one. I have latest version of Camera Raw installed and still no settings folder. I even attempted to find it by looking in camera raw where it has saved the custom settings I made as presets and it shows that they are saved but will not show me where. I am using CS5 specifically Photoshop v12.0.4 and Bridge. I have Lightroom 4. I have iMac OS 10.7.3...Do I need to reinstall Camera Raw and how do you do that? Will I then lose my presets that I made in CameraRaw?
When I create an export preset and then return later to use it, the folder for saving it to has changed (to whatever I used last. Because I use the presets to re-size images for my 40 odd web sites, this is really inconvenient. Can this behaviour be changed so that the preset remembers the selected folder? And if not could it be considered as an option for the next update?
I recently upgraded from LR3 to LR4, and on a different computer (Mac to PC/Windows 7) so I have a feeling I'll be here a lot.
I have transferred everything over to the new computer, and have "installed" the purchased Presets in question (Kevin Kubota Vintage Delish). As far as I can tell, the installation went smoothly and successful, however, when I run LR4, there are still no Presets to choose from.
I've been trying to install an update to Camera Raw 6.6 on my laptop, and it just gives an error for no reason when I'm trying to install. Running Windows 7 right now, and checked the install logs:
Summary - 0 fatal error(s), 1 error(s), 3 warning(s) WARNING: Error setting action for {1F32F9AB-8B7F-4926-9B58-04DDC0FD2559} Camera Profiles Installer_6.6_AdobeCameraRawProfile6.0All: WARNING: Error setting action for {2F595448-AD13-4615-820A-15F141F762E8} Photoshop Camera Raw_6.6_AdobeCameraRaw6.0All: WARNING: Some payload actions specified in the deployment file could not be applied. ERROR: Payload actions could not be set. Search the log for "BEGIN Setting requested payload actions" for details.
Search the same string above to find when the error occurred.
In CS5 Bridge I want to see the exposure speed immediately for any chosen picture. So I choose exposure plus exposure correction in Bridge presets.
But after starting my PC the next time, this setting is automatically brought back to "exposure mode" plus "exposure index", which has the effect, that Bridge once again doesn't show the exposure speed (1/30 or 1/100) for the photos. What to do???
Bought a new desktop today, which is running Win7 x64 Home Premium. Previously was running a laptop with Win7 x64 Ultimate.
I've installed CS5 with the appropriate patches, and attempted to install ACR7.1. The Adobe Application Manager launched and errors with:
"Updates could not be applied. Please contact your Administrator if you wish to apply updates on your machine. Updates have been suppressed by the Administrator."
First of all, is this a Windows priviledges error, or an Adobe App Manager error?If it's the former, I am logged in locally with the Admin account. I have tried running the patch installer "Run as Administrator" with the same result.
When trying to print in Elements 11, after clicking "Print/Page Setup/Presets/Show Presets", the box freezes. Clicking Cancel or OK does not work. I then have to Force Quit Elements to clear it. Apple say that it is a problem with Elements. Using the same procedure in other applications, clicking Cancel or OK does work.
I am having trouble getting my presets to show up under presets on the left hand side of the screen. They are still in develop presets but there not showing up and Ive tried deleting them and adding them again then closing out of lightroom 4 and going back in but I can not seem to get them to show up again. I must have hit something but there not showing up again
I have recenty had to reinstall all my software, and manged to find most of my old Lightroom settings in the Lightroom Presets folder (inside the Appdata folder on a PC) but I seem to have lost my custom tone curves.
Do you know which folder they should be in (indise the Lightroom Presets folder)
I STILL don't understand why there are TWO comminty forums for Lightroom;
So I've had this problem for awhile, and thinking that everything would be repaired upon switching to an SSD and clean installing Adobe, my dang preferences REFUSE to save. I set them, restart, check, nothing. I've gone in and deleted my photoshop preference files hoping it would just create a new com.adobe.blah, but no, my program has a mind of its own.
I haven't noticed this problem within any other CC app I use, just Photoshop.It annoys me so much because I hate the application frame with a passion. It's an OCD thing.
Suddenly I am no longer able to make any adjustments to images. When I try altering the curves, or levels, it looks like a change is happening,(shows up in preview)but when we hit OK, the change I made completely disappears and the image looks the same as before I tried to apply the adjustment.
[URL] Namely, when using Adjustments > Curves, the changes appear in the preview mode but don't stick when I press OK.
I'm using Photoshop CS3 Extended 10.0 under Windows 7.0. I received some black and white drawings from two artists. They're TIFFs, converted to CMYK/8, with only one background layer. My goal is to darken the black lines in selected sections using the Curves function.
I've used Curves successfully with the images from Artist A but not Artist B, so I don't think it's a problem with my technique or my Photoshop installation. It must be something specific to Artist B's files.
1) Deleted the preferences file and let Photoshop create a new one. No change.
2) Viewed the image at 100% rather than, say, 33.3%. Actually, that's worse. The changes are visible in the preview mode at 33.3% but NOT at 100%.
3) Created a duplicate layer with CTRL-J and tried Curves on it. No change.
4) Double-clicked on the Background layer to create a Layer 0 and tried Curves on it. No change.
* The Curves preview mode shows the changes when I lighten the sections, but there's no perceptible change when I darken the sections. Again, the changes don't stick when I press OK.
* I tried the Brightness/Contrast function to see what would happen. Nothing. The images don't change even in the preview mode.
But when I clicked the Use Legacy box in Brightness/Contrast, the function worked and the changes stuck. What does that mean? That the files are saved in an old format that version 10.0 can't modify? I thought a TIFF was a TIFF.
To address the last point, I saved the file under another name and tried Curves on that file. I tried the four suggestions above as well. Again, the changes in the preview mode were visible at a lower magnification but not at 100%. The only difference is that, unlike before, darkening the image produced noticeable changes. But the changes still didn't stick when I pressed OK.
I just tried to rotate an image, pressing "R" for the rotate tool, getting the compass rose over the image, and then rotated the image by dragging 90 degrees. So far so good. Then, I wanted to crop the image into a panorama proportion, by pressing "C" for crop tool - and voilá, the image jumps back into the original rotation, just like that. I have tried to press the Enter key after rotating, I have tried to save, I have tried to change to other tools in between, I have looked into the toolbar for clues but found none - I just can't understand what it is that I'm supposed to do to make the rotation stick.
I'll just add that I managed to solve this temporarily by selecting rotate 90 degrees from the menu and then cropping - why I can't do this visually by using the "R" command and dragging visually, then changing to the crop tool. It's just fortunate that there's often several ways to accomplish the same things in PS. So, I managed to work around it - but I'm still wondering why I couldn't make the rotation stick by using the method above. If I'd like to make a more arbitrary rotation then that seems like the way to do it - if it would stick.
I'm finding a really strange and inconsistent bug when managing my Layer Comps. I am dependent on Layer Comps, they're behaving inconsistently in CS6.
When manoeuvering between Layer Comps, the updates I'm making to save a Layer Comp and move on to another are SOMETIMES not working. I set a comp, move to another, go BACK to the original one and it's messed up.
I am using Photoshop Extended CS6 on a Mac with OS 10.7.4 and the latest driver for an Epson 7800 just downloaded from the Epson site. In the Print Settings dialogue "Page Setup" defaults to "Roll Paper - Banner" and any other selection such as sheet does not stick when saving a printing preset. Once selected, it appears to stay for one print, but returns to roll paper so that it needs to be reset with every print.
I have to make an animation for a game, and I have to put a large number of images exactly next to each other in a line. This takes a lot of time to do by hand. Is there a way (or software) to do this automatically?
If I type text along the edge of a circle, how do I make the text "stick" to the circle and move with it when I resize that circle? The same would go for any shape.
the shortcut I use for dust and scratches filter, command, option, shift, control, D, just wont stick. other shortcut I use for other filters stay, but this one keep going away.
I make some medals for my game site. And now I've got a problem with my silver medal. I cant make it transparant with the magic erasestick like I did with gold and bronze.
Just upgraded to Map 2012, and want to use the map classic workspace. I spend time setting up all the various toolbars where I want them, and then, when I exit and come back in, either the toolbars are no longer there and I have to insert them again, or it has switched me back to the default worspace.
I have 2 images : one is the image of a country. I would like to copy paste the second image onto the image of the country and crop it so that it follows the country boundaries. once done, basically, if i took the second image alone, it would overlap exactly the image of the country I bet there is an easy way to do that
Can't open file from Nikon D7100 in Camera RAW Plug-In,i have Photoshop CS5 and plugin is upgraded.Format NEF from Nikon D 7100 is not in this plug-in photoshop.
I am using Photoshop Elements 11, using WIndows 7 Operating System. I have a new camera Canon Rebel T5i, and having problem viewing images in raw format (cr2).Message in PE11, states, "Camera model not supported by installed version of Camera raw."
Canon software views images. Suspect my minimum camera raw plug in version does not support this new camera..I am unable to locate in the software any menu item that allows me to view the camera raw plug in version.
Have no choices in the camera calibration tab inside camera raw plugin. Use CS3 and Raw 4.6. Are choices only available in later version or PS? Also in Raw preferences choice for camera serial number and also setting as defaults. Where to enter serial number etc.
I've got this huge project - a printed catalog - that involves hundreds of product photos, of which the originals are scattered all over the place in different directories, etc. Nobody knows where a photo might be hiding. However, luckily, this is an update of an earlier catalog of the same type, so most of the photos are already there. Unfortunately, many of them need to be "photoshopped" in some way, adding pigtail connectors in place of terminal blocks etc., which is fine.
But, when I try to use the edit bitmap function in DRAW, the photo always opens in a new copy of PhotoPaint, forcing me to then save it separately, adding a name instead of "Bitmap in..." which would be all the 100 or so photos that I will have to work on. I don't have any need to have the bitmap saved separately except that I need to have the various photos that I'm disecting in the same copy of PhotoPaint, so that means I have to jump though all these hoops.
Q: Is there a way to force the Edit Bitmap to open everything in the same copy of PhotoPaint? So that I can simply cut and paste pieces, etc.
Eventually I can get it to work but sometimes only after many (10-20) tries. Very frustrating since it is possible - just not reliable.
When I am in Capture (Visual Studio SE DVD ver 10) and go to Options - Video and Audio Capture Settings and try and select S Video (default is Composite), it seems to take but after clicking OK and the Change Field Order window pops up and does its thing, it frequently will not 'take'. I repeat numerous times until it does take so it is possible.
Any configuration file that holds the default settings for this so I can set S Video as the default instead of Composite. Then (I assume) the problem wouldn't matter.
I'm using ACA 2008 and recently had to have some things reconfigured on my computer by our IT guy because of a few problems. Because of that, I've had to fix a couple of things with my settings in ACA to get it back to what I had before.
One thing that changed that I can't seem to fix is a custom catalog for my tool pallet we have always used that wont come up with my standard ACA pallets when I start up ACA. I have to hit cntrl+4 to bring up the catalog library and from there I can see the one I want to use. I grab the eyedropper and drag it to the tool pallets and it works fine, but when I close out ACA and restart it's gone again.
