I'm trying to create an accurate door schedule. I have curtain wall doors but on the schedule it rounds them to 1/16" How can I round the dimensions in the schedule to the nearest inch instead?
View 3 RepliesI know of DIMRND, but how is it possible make acad round dimensions UP (within a specified value) instead of to the nearest?
(This could be very handy to make various lengths of wooden baseboards and other mountings fit to machine cabinet standard lengths. I'd like to keep all the work in acad, and avoid ms-excel.)
I am looking for a way to get my dimensions to round up instead of to the nearest.
For example... when I have one line that is 11-15/32" and one that is 11-17/32" and I need them to round up to the nearest 1/4". I want it to round up, showing 11-1/2" and 11-3/4" but instead i get 11-1/2" for both.
The window type showed up in the window schedule. But the window dimension didn't.
What's the reason of it? I know you can enter the dimension directly into the schedule. But it would be nice if it comes it automatically. See attached file.
When labeling pipes in a pipe network; is there a way or expression to roundup the label to 6 inch interval. For example, if I have a pipe length of 2.6 feet, I want to roundup this to 3.0 feet and if I have a pipe length of 2.4 feet, I want to roundup this to 2.5 feet.
View 7 Replies View RelatedIs there some super secret option for making fractions in the drawing environment round up to the nearest, for example, 1/16th? There has to be, there just has to be.
IV2012
Windows XP SP3 32-bit
Intel Core 2 Duo 6400 @ 2.13 GHz
Nvidia Quadro FX 3450/4000 SDI 256MB Vram
2 GB Ram
160GB HDD
Way to round decimal dimension values to the nearest 1/16"? For instance, 43.0599 would display as 43.0625 (On a drawing). Tried playing with tolerances, but thought it would be better addressed as customization.
View 2 Replies View RelatedHow can the dimensions for the system family door be shown in the door schedule?
I tried to make a instance paramater, type parameter, both through shared parameter for the doors in the family file, but they are still not showing up.
I have a roadway alignment and it is ending on 4+50.86, we simply want the alignment end to read on 4+51. is it possible to make this happen?
View 4 Replies View RelatedIn Illustrator CS6, Strokes are automaticly rounding to the nearest whole point size, and shapes I place in a given location are snapping to a grid that I can't seem to find anywhere. All my snaps are turned off, as well as "allign to pixel grid", and I can't seem to find anything in preferences or the transform or object panes that would affect these things. How do I disable both things?
View 5 Replies View RelatedWay to round decimal dimension values to the nearest 1/16"? For instance, 43.0599 would display as 43.0625 (On a drawing). Tried playing with tolerances, but thought it would be better addressed as customization.
View 7 Replies View RelatedHow can I set dimensions to not show inch tick by default just the number?
View 1 Replies View RelatedHow to round down dimensions. I see some topics with writing LISP codes to do it but I have Autocad LT and those cant use LISP codes right? Ive also been looking into the Round off variable in the Primary units for the dimension style but its a little confusing. What I want to do is just round down my dimension at the given precision.
Lets say I have my precision set to .000 (even though I may have dimensions with .00) I want my dimension of 2.875500 to round down to 2.875 and not up to 2.876 then I also have a dimension of 2.90952929 and I want that to round down to 2.909 and I can not find a way of getting both of these to round down with the same setting on the same dimension style. Basically I just want to truncate my dimensions.
I know you can obviously set the tolerance in the styles to round to the nearest 1/16 or 1/32, but is there a way to make it always round a dimension up instead of to the nearest? IV2012
Windows XP SP3 32-bit
Intel Core 2 Duo 6400 @ 2.13 GHz
Nvidia Quadro FX 3450/4000 SDI 256MB Vram
2 GB Ram
160GB HDD
I have created a pressure network using 8-inch diameter pipes. How would I change the 8-inch pipes to 6-inch pipes without having to recreate the network.
View 7 Replies View RelatedHow to restrict a length parameter to 6 inch increments using a formula? Or another method? I have a simple frame I want to stretch dynamically in 6 inch intervals.
View 4 Replies View Relatedhow to rescale the symbols on a drawing from 2 inch to 1 inch? For some reason I forgot this and now I am with my icons twice pick.
View 9 Replies View RelatedSomeone would like a small 1 inch by 1 inch logo for invoices at 600 DPI. However I understand that illustrator doesnt work in DPI or PPI since it's vector. Would I have to transfer the small image over to photoshop. I did try and save a 1 inch by 1 inch logo at 600 PPI, however when I saved the image it was no longer 1 inch by 1 inch. It had increased significantly in size regardless of what file format I saved the image as.
View 10 Replies View RelatedI placed I-Joist on the floor plan and used the wrong spacing. Can I select the already placed joist and change the spacing from 12 inch OC to 16 inches OC? I know I can select the ones I want to change, but I do not see in the properties window where I can change the spacing. Unless I am overlooking it.
View 9 Replies View RelatedIs there a way to have more than 4 filters for a schedule?
View 2 Replies View RelatedI can create structural column schedule but i cant create for architectural columns.i wonder that i do something wrong or simply i cant be done?
View 1 Replies View RelatedIs there a way to add new parameters to revision schedule
View 2 Replies View RelatedIs it possible to control if the door tags is displayed by the schedules?
View 4 Replies View RelatedIs there a way to add additional filters to a schedule? I have a sheet list that needs a total of 6 filters.
View 1 Replies View Relatedhow to do the parameters of Schedule/Quantities.
View 9 Replies View RelatedHow to export a schedule from Revit to Excel,
I’m wondering if there is a way to export schedule from Revit to Excel..
We have a custom built schedule which has the typical "Comments" field. As we aork in our project and add items to that particular row, the "Comments" field gets reset to be blank.
What we are trying to do in effect is to establish a reference point so the we know where we are in relative to the reference point.
Is there a way to make the "Comments" field stick?
is there any way to schedule objects by id number?, maybe through a formula within the schedule that may call the id or the revit API and if that is the case
View 2 Replies View RelatedIf I try to draw a square box in any size, illustator does not make it square.
For example, if I select the Rectangle Tool, click in the art space and set the rectangle to one inch by one inch, I get a box that is 1.0003 by 1.0003
Here is a screen shot of what I am getting.
This is also happening to any rectangle and circle.
Even if I hold down shift to keep the preportions lock, it still happens.
I have check and nothing is snapping or set to snap.
This is a major issue for me as I use illustator for creating dielines and those dielines need to be very accurate.
I've been trying to style my sheet list schedule. ... trying.Is it true that I can't
* style (fontsize, fontweight etc) a 'sorting header'?
* style the scheduleborder to only underline the sheetlist-rows
* seperate the header styles from sheetlist styles? (I don't want the header to have a border.... while sheetlist-row should be underlined)
* format the height of a row
I am trying to add the typical category of "glazing" to a door schedule, but when I add a door with glass into my project, I cannot make this information show up on my schedule. I need typical information such as "!/4" Temp" and "1" Insul" under the category of glazing. I added the "Door: Glass" heading in the schedule, but nothing appears when I add a glass door into the project. I was able to easily do this in AutoCAD Architecture.
View 5 Replies View Related