Is there another way to retract fillets? I've tried the ctrl, shift, and both at once. None of those key selections did nothing with my 3D drawing. Is there something I could do in my settings to adjust this?
View 9 RepliesI have a shape that happens to have many nodes; it was simple to extrude it (inventor saw it as a complete shape) but adding fillets is another story. each tiny segment requires a click to select it. is there any way to simplify this — either through simplifying the path somehow or by selecting the edge in some other manner?
i saw a thread on the forums about imported 2d vector files with a similar issue. I did import my file but it came from rhino. everything is fine except this one issue. i guess i could go back to rhino but i would prefer not to.
i have attached a small screenshot of one area of my sketch.
I have come to Inventor after using Pro-Engineer and Solidworks. How to find the inspect tools difficult to use? The effort required to find the radius of a fillet (for example on imported parts) is huge. I am using IV 2013.
View 3 Replies View RelatedWhen I am adding blends or fillets to a 3D model, sometimes after picking a few edges I will inadvertently select a wrong edge. Can I deselect the edge and resume selecting edges for the fillets or do I have to start over from the beginning?
View 5 Replies View Relatedhow to make the fillets goes the opposite direction.I want the fillets to round the edges not join the edges together
View 6 Replies View RelatedI have a part that requires a large number of fillets. What would be the best approach, so it doesnt take 5 hours to update the model everytime i update something on the model?
View 2 Replies View RelatedI am using Inventor 2012 and have recently experienced a problem with the fillet not working correctly. I have a curve and a straight line that connect and when I select fillet it will allow me to select the curve but not the straight line. I have been able to do this in the past with no problems.
View 4 Replies View RelatedI have a tube steel frame and need to show weldments between the tubes except for the inside fillets. I then need to show sanding the welds flush. Also I need to show a rounded edge where the mitered point meets the outside edge of the tube beside it. I'm very new with inventor Attached is my curret drawing file.
View 1 Replies View RelatedI created a legend in paperspace with a white background hatch. I want to move all of the text and symbols. When I select everything at the same time, it also grabs the hatch fill underneath. I can't do a window select to grab everything and shift select to subtract out of the hatch underneath.
View 8 Replies View RelatedUsing the local adjustment brush i can change the size of the brush using the [ and ] brackets However.. when i make a small error and want to erase brushed-area by using the ALT key then the brush size seems to be fixed to one size ?
View 1 Replies View RelatedI recently started drawing in cad, and i have a couple problems. At time now i am trying to learn more of isometric drawing and i have couple questions about drawing a particular figure:
21.jpg
So in there i don't know how to draw that "thing" witch i highlighted in red. I don't know at witch angle i should draw it's center(center length should be 50 cm). If I would know that, i could easily draw a isocircle above. So how do i find this "right" angle?
Second question would be about isofillets - i read here in forums that i should do them in isocircles, and i did that and i got good results - it looks very good, but the problem is, that in this drawing, it shows that those isocircles should have a defined radius - R6, R16 and etc, but if i do round corners with isocircles, i dont get that result(in R16 case radius is even way too big). So maybe there is a way to do them "right" and have them defined? I attached that drawing .
I'm using AutoCAD 2010 32bit on Windows XP with built-in video - so no hardware rendering, etc. I have a situation where a 3D solid that I have created looses its fillets while creating a PDF.
The solid was built using Union, Subtraction, Slicing and Fillet operations. I have attached the DWG and two PDFs - one with fillets, the other without. Both PDFs were created within moments of each other from the same DWG. Notice in the DWG that the solid model has now lost all the fillets on the edges, but they were there when the good PDF was generated. I create the PDFs using ACAD's Output | Export PDF feature on a single Layout in Paperspace. When the PDF is generating, for about two seconds you see the solid edges loose their fillets, and then sometimes return to normal, but other times the DWG changes and I have to add the fillets again.
I know about using the Print option, and also 3rd PDF generators but they also fail - plus, I want to use Output because it's more convenient. I like AutoCAD, but I am thinking of dumping it for SolidWorks (which I just evaluated for 30 days). I can't be putting a lot of time into models that loose their fillets. This same issue happened to me about a year ago, and I finally had to re-create the model from scratch to solve. It's ridiculous that this doesn't work, it's kinda fundamental.
BTW: I tried a fresh OS and ACAD install and the problem persists.
I would like to place arrowheads on the vertical sectioning lines (for the hatched view on the right), as well as on the horizontal line (for the bottom view), but I couldn't succeed in doing this. So, I left it just as line without arrowheads. Also, I would like to know if there are options for dimensioning fillets, as the one in my drawing comes with round symbol of portion of circle upon which the arrowhead touch (instead of on the fillet itself) - see R.12 and R.50.
View 9 Replies View RelatedI'm using AutoCAD 2010 32bit on Windows XP with built-in video - so no hardware rendering, etc. I have a situation where a 3D solid that I have created looses its fillets while creating a PDF.
The solid was built using Union, Subtraction, Slicing and Fillet operations. I have attached the DWG and two PDFs - one with fillets, the other without. Both PDFs were created within moments of each other from the same DWG. Notice in the DWG that the solid model has rounded edges (fillets) along most edges, but they are missing in the bad PDF, and show in the good PDF. I create the PDFs using ACAD's Output | Export PDF feature on a single Layout in Paperspace. When the PDF is generating, for about two seconds you see the solid edges loose their fillets, and then sometimes return to normal, but other times the DWG changes and I have to add the fillets again.
BTW: I tried a fresh OS and ACAD install and problem persists.
PDS 2014/Win8 64/32GB RAM/256GB SSD RAID1/Asus P9X79 Deluxe/i7 3820/nVidia Quadro K2000D/Dual 27" LCD
Is there a way to add "Round or Fillets to solids"?
View 2 Replies View RelatedI just made a 3D model with ACAD 2011.
fixed_pedestal.dwg
It has chamfers and fillets. When i copy the 3D model, the copy doesn't have any chamfers or fillets .
We do technical illustrations and are switching to Adobe Illustrator from another software. One function we find very necessary is creating rounded fillets with specified radii between two lines. Is there a way to accomplish this with AI or is a script required?
View 5 Replies View RelatedIs there a way in the description field of an Inventor hole table to have mixed units? Some hole sizes at fractions, some at 2 plc, and others at 3 places.
Inventor Pro 2013 or 14
I can't get Inventor 2013 show a custom iproperty correct.My iLogic rule is this:
iProperties.Value("Custom", "myvol")=volume = iProperties.Volume
But the custom iProperty is a Yes or No.Had no problem with this in Inventor 2011.
I'm trying to use iLogic Design Copy to copy an assembly and all its associated parts to another directory. The assembly contains content center parts. Inventor warns me that the destination file of one of the CC parts (and 18 others) will be overwritten. When I go ahead and copy anyway, the copying process stops at that specific CC part. The Design Copy Progress dialog box states there is an error copying that CC part. When I close the Design Copy Progress dialog box, Inventor crashes.
The error copying the CC part: I'm allowed to use content center parts in iLogic Design Copied stuff, right? I searched some related topics and I'm under the impression that Inventor keeps the CC parts in its own directory and shouldn't be trying to overwrite them.
We are trying to get task scheduler to automatically download certain files from the Vault. Templates and Styles. The templates work great, but there is no way to specify any filetypes other than Inventor filetypes. Am I missing something? Is there a way to specify non-inventor filetypes?
View 2 Replies View RelatedCan't seem to locate the Inventor Material Library....under Default in Projects, the Inventor Material Library is highlighted in Red. Where I need to browse to inorder to locate it?
View 2 Replies View RelatedUpgrading to a new computer.
1. What is the best CPU to use for Inventor between the i7 and the a Dual Xeon System
2. Would 32GB of memory easily cover all modelling such as assemblies?
3. Any advantage of having 2 x SSD instaed of 1 x SSD
4. Looking at the Nvidia GTX690 graphics card....this should be a good card
Is there a program that can make stp files from our inventor models? Our purchasing department wants to do this task for our vendors and they don't want in have a full version of Inventor to do it.
View 6 Replies View RelatedSo I installed TD Inventor Professional 30-Day free trial and I downloaded the installer and went through the download of the installer process and it made an autodesk inventor folder on my desktop. I click on it and it takes me into the C drive under the autodesk file Inventor 2012 TestDrive and has an Application called TDSetup. Once I click on it it does a load wheel then nothing happens.
I can't seem to find a solution and I just installed DirectX.
Inventor on a touch screen style PC, and if so... does it work? This hardware looks like it would be fun to work with, but I don't know if it's quite there yet for CAD work.
View 7 Replies View RelatedHow to set off the trim inventor does when one dimensions cross another one?
View 4 Replies View Relatedwe modeled prototypes of trains (locomotives) in 3dsMax, these models will be used to produce molds and thumbnails of these, you must give the producer STP files, max does not export these files, and we have exported in various formats supported by some programs if exported STP, eg Inventor, we have exported files are STL, oBJ and DWG, so far so good, all save the parts or layers without problem.
The problem comes when exporting from Inventor to STP, nothing happens, the STP file is as if you were empty, there is nothing ..
I have attached the DWG file, if possible, have 17 CAD models for export to STP.
I would like to know how can i create or add an UOM. (for example : 25 per box) in my BOM.
View 1 Replies View RelatedI'm new to inventor, used it to design a computer case of my own, so now that I got all of my parts in ipt I need to convert them to dxf in 1:1 scale.
What is the easiest way to do that? I found some info here [URL]... but in the Environments tab I don't have any ''AEC Exchange''.
Oh and another thing, after sketching all my parts I ''deleted'' the dimensions from the view, so is there any way I can make them show up in that dxf because I will have to send the dxf's to someone who will laser cut the parts, so dimensions have to be shown of course, or do I have to add them one by one?
Using Inventor 2012 Premium, this problem didn't exist in 2011.
When I click "I"->New(small arrow)->Part. All dimensions are in cm.
If I instead click "I"->New and choose the Part template all dimensions are in mm, as it should. I have two .ipt-templates (standard (mm) and sheet metal (mm))
My college went through all templates we have and no one uses cm.