AutoCAD 2010 :: Paste From Clipboard To Some Drawings
Aug 13, 2013
Recently I started using AutoCAD 2012 and I ran into one problem which I didn't encounter before.
The problem is that when I try to paste objects from another drawing (through clipboard - usually another instance of AutoCAD) I can't paste them in some drawings only.
The following things happen:
-Autocad behaves normally like when I usually paste objects except there is nothing inserted.
-When I save the drawing after unsuccessful insert, even if I canceled inserting, drawing size increases dramatically (for about 2-4MB).
-If I open new drawing, I can insert objects there.
-Also when I copy to clipboard, autocad takes a lot of time even if it is only few lines.
I tried these thing to fix issue:
-I checked if there are any layers turned off.
-I tried to copy with COPYBASE
-I restarted autocad (sometimes it works but only for some moments or for one insert).
-I did PURGE and AUDIT
-I tried to copy paste in same instance of AutoCAD but that didn't work.
I'm usually using t least 2 instances of AutoCAD (I hope that is not the problem).
View 7 Replies
ADVERTISEMENT
May 9, 2013
I am having an issue while trying to copy/paste via clipboard. I copy (with or without basepoint) on one drawing then try to paste to another drawing using ctrl v. the first two times, the object pastes. On the third attempt my cursor looks like it is trying to paste something and if I move near an object on the drawing it snaps to points, but no object pastes. After doing so I check my layer manager and the layers involved with this action do paste. After a few attempts with no luck, a weird object I have never seen before appears.
I have tried to purge and audit as well as copying the whole drawing to a new drawing but have had no luck.
Side note, after ctrl v is pressed (or ctrl shift v) the command line says something about duplication of some block name ignored.
View 2 Replies
View Related
Nov 8, 2012
I somehow lost the toolbar with the "copy to the clipboard" and "paste from the clipboard" icons.. which tool bar i need to turn back on?
View 2 Replies
View Related
May 20, 2011
When using the Clipboard to move entities from one drawing to another I need to open the window Tools; Options; and that's it for the Paste as Block and Paste Options to be available. What I mean is do I need to do this with each new session of LT? That I will need to check out. I tried my Template and it allowed Paste without going to the Options Dialog in the same session.
Object selection limit for display of grips is set to 32,000
View 9 Replies
View Related
Dec 28, 2012
I'm using ACAD LT 2008.
When i try to copy paste some drawing entities from a heavy drawing file to any other file, the program blocks and says 'not responding', endlessly. So i always have to shutdown the program. I experience the same problem using the designcenter: when I try to copy a layout into another drawing, my computer gets stuck.
Another annoying problem with these files is that they are so heavy, while in fact they shouldn't be. I tried the aectoacad file command. In result the file id half as big, but after I open it and save it, again is the original size.
View 5 Replies
View Related
Mar 20, 2013
You can copy both the surface and the original (in this case contour polylines) data or only the surface. In both cases paste operation results into a copy of both data and surface.
Ok, But when paste and rebuild, the distance from original base point and destination point is applied in turn to the surface itself. Maybe it is a BUG ?
Civil 3D (2013)
View 2 Replies
View Related
Aug 6, 2012
You'd think that being able to copy and paste would be a fairly straightforward task in any piece of software. Not in AutoCAD 2013. The Help file says the commands are located on the 'Clipboard' panel, under the 'Home' tab. I've spent a lot of time searching and can't find them, nor can I find any information about how to turn such a panel on.
This is the sort of thing that shouldn't be a problem in a well-designed piece of software. We're finding AutoCAD 2013 to be almost unusable out of the box, and have to spend ages fiddling with the (clunky) Custom User Interface commands to make it work. Every time AutoDesk bring out a new version of AutoCAD it seems to get even worse. I could resort to keyboard commands, but shouldn't have to. I'm starting to think the best solution would be to invest in a copy of Vectorworks instead.
View 6 Replies
View Related
Jan 11, 2013
I have had this problem many times with both CS6 and CS5. I'm not sure if this is a Photoshop question or a Windows OS 8 question but anyways it seems to only happen with Photoshop.
I copy an image offline to edit in photoshop. After I'm finished I save it and delete the image layer from the workspace to get ready for the next image. I grab another image that I want to paste in the same photshop workspace. When I paste, it pastes the same image I copied first. It even does this when I restart Photoshop, so that's why I think it may have to do with Windows Clipboard.
I'm also really interested in details about how 'Copy/Paste" and the "Clipboard" work with different programs so I can best understand how to utilize it with what seems to be a simple tool, yet I still find myslef with questions because I don't filly undertsnad it.
View 5 Replies
View Related
Nov 18, 2011
I copied a file from my Card Program and then pasted it into X4. Besides the quality being shocking the end section of the image was pasted at the beginning, which I saw mentioned in another post.
But the same clipboard image pasted perfectly in PSPX and PSPX3, so the problem is not with the image nor with the Card Program.
Below is the image shown pasted in X, X3 and X4.
Has this been addressed and/or reported or is there a fix. This is extremely poor standards and obviously is from incorrect programming in X4. Not impressed.
Plainly clear one cannot have only X4 installed to work with as it still has many bugs that have not been rectified.
View 14 Replies
View Related
Nov 20, 2013
I'm a relative noob to GIMP. Long time Paint Shop Pro user who has gone over to a Mac Book. I'm very frustrated by my inability to paste more than one layer at a time. Meaning, that I paste a layer from the clipboard into an image I am building, but I cant copy a new image to paste in without shutting down the program & reopening....Otherwise the same image keeps trying to repaste.
View 7 Replies
View Related
Jun 11, 2012
I just got Gimp 2.8 for Mac. I can open a picture, do a blur and export. The copy paste is giving me problems. It worked once. I make a selection with the rectangle and do a control c. I also tried the menu. The selection doesn't go to the clipboard. After 6 tries, the same original copy was the only one in there.
View 1 Replies
View Related
Dec 20, 2012
I've just installed CorelDraw X6 onto a W7 PC. Pasting bitmaps from clipboard is not working. Nor is bitmap editing when a bitmap has been imported into a document. I've loaded X6 onto two other computers with the same result (or lack of).
View 9 Replies
View Related
Jun 2, 2009
I am trying to copy some items in cad but I keep getting the error ' copy to clipboard failed'.
View 9 Replies
View Related
Feb 27, 2012
Clipboard options grey out, however active with keyboard commands, "Paste as Block" CRTL-Shift-V.
View 4 Replies
View Related
Nov 21, 2006
I'm using Autocad 2002.
I am having trouble copying out of a drawing (model space) which i received from someone else, and pasting into my own. The properties on the original dwg file suggest it was created Sept 2001. It appears to copy OK (copyclip/copybase), but when i jump into my file and try to paste, the command line just reads:
_pasteclip
and nothing appears in my model space.
I've tried zooming extents, exploding the original, changing layers and line types etc into the same as in my own dwg. I've also tried to convert/save the dwg file into dxf's and other version dwg's....without success.
I have about half a dozen drawings received from the same source, and they all let you copy data into them, but won't let you copy/cut out.
View 8 Replies
View Related
Apr 13, 2007
I recently re-installed my AutoCad 2002 on an XP-SP2 computer.
I used to be able to do a windows copy or copy with basepoint and paste the item into another drawing.
Since I put AC on the XP computer, this does not work.
View 9 Replies
View Related
Jul 4, 2013
When pasting a block from a drawing to a second drawing using the clipboard method the block pasted in with components of block in different area of drawing but still linked together. This even happened in the same drawing.
View 9 Replies
View Related
Jun 16, 2013
we got the big size file (file A), we fix it then we copy/ paste information (e.g. texts) from the other bad file (file B). File A becomes big size again although texts were copied is simple.
Question : How the best to copy these texts?
View 9 Replies
View Related
Aug 22, 2012
This drawing file doesnt allow copy to clipboard or even binding on to other drawing. It was originally sent to us from another company, I have deleted all the objects and layers, purged it. If I create a new line or other object, Ctrl+C doesnt work.
View 2 Replies
View Related
Jan 31, 2013
...still happening in 2013...any answers out there? I'm getting pretty tired of redefining blocks (sending the wipeout to the back of the draw order) after pasting them into drawings.
View 4 Replies
View Related
Jan 11, 2013
i have various files which I cannot copy elements of into other drawings.
when i use the ctrol+copy command, I get the "copy to clipboard failed". This has only started since I upgraded to AutoCAD2012.
View 4 Replies
View Related
Feb 2, 2012
using map 3d 2012 with windows 7 and when copy and try to paste it takes roughly 3.5 minutes.
View 1 Replies
View Related
Dec 2, 2013
I am having trouble to paste diagram from autocad to MS word.
View 3 Replies
View Related
Jun 19, 2013
I have encountered the paste as block command of using AutoCAD 2012. i exploded the block and modified. After that i select the objects that i exploded and want to create another block again. I could do it before now most of the time when i select the objects and used the commond option " copy with base point" . When i select the base poing it took about 7-8 seconds( which is supposed to be very long) and in the commond line it display as Img-1. After i selected the base point..again it will take a few seconds and display the following Img-2 & Img-3. And my autocad performance is really slow nowadays. Any option i can do for faster speed? Especially whenever i select the object i hv to wait about 3 seconds.
View 9 Replies
View Related
Jul 10, 2013
My AutoCAD often will not copy & paste. It prompts for insertion point and when picked nothing appears. This happens on many different drawings. Windows 7.
View 2 Replies
View Related
Nov 20, 2012
I am currently designing a kitchen with a complete floor plan. I had requested some accessories files from a company called Pearl works and they sent me each file that I requested. The problem is that when I copy and paste each image file into my existing floor plan, they all show up as the same image and not the seperate images that should appear. Am I doing something wrong with the clipboard process?
I have also tried deleting the drawing and re-inserting a different file and when I do every file thereafter is the same as the one that I just switched.
View 9 Replies
View Related
May 9, 2012
I've got a user that when he clicks on an item to highlight it, he can't drag it anywhere, can't copy and paste it, and can't delete it. I've uninstalled and resinstalled the application more than once. After an uninstall, I went through all directories and deleted all remaining files and folders that had either Autodesk or AutoCAD in the name and spent 1 1/2 hrs sifting through the registry and eliminating all Autodesk and AutoCAD entries. I then reinstalled the application (AutoCAD 2010), and the user is still having the same issues.
OS: Windows XP SP3
Product: AutoCAD 2010
View 9 Replies
View Related
Aug 12, 2013
When I copy and paste on Autocad 2012, it goes very slow.
I installed the service pack, I tried removing the layer filters and a few other fixes that are out there. The machine is powerful enough to handle the application.
I tried reinstalling the application and that didn't do anything. The DWG file that's on the network share is being used by other people without any issue, I'm the only one having this problem.
View 3 Replies
View Related
Sep 21, 2012
I have objects in Visio that I want to place into an AutoCad DWG. They can go in as a block. How do I do that?
View 6 Replies
View Related
Oct 17, 2013
When I try to copy and pate any element within the same drawing it won´t paste it will say: "specify insertion point" and I´ve given up.
I tried PICKFIRST but it is set to 1, also tried checking if it would fit in my screen or if the zoom was messed up, but nothing works!
View 9 Replies
View Related
Oct 10, 2013
I tried to copy some mtext from a different Paperspace and pasted into new drawing (on paperspace) but no text appear while all the layers are turned on. Below pic ask for specific inserting point, i just specified on the screen but won't work. I opened new blank autocad drawing and tried to paste on paper space now it works.
TEXT PSSPACE.JPG
View 9 Replies
View Related
