AutoCAD 2010 :: Clipboard Option Grey Out
Feb 27, 2012Clipboard options grey out, however active with keyboard commands, "Paste as Block" CRTL-Shift-V.
View 4 Replies
ADVERTISEMENT
AutoCad :: Lost Toolbar With Copy To Clipboard And Paste From Clipboard Icons
Nov 8, 2012I somehow lost the toolbar with the "copy to the clipboard" and "paste from the clipboard" icons.. which tool bar i need to turn back on?
View 2 Replies View RelatedAutoCAD 2010 :: Paste From Clipboard To Some Drawings
Aug 13, 2013Recently I started using AutoCAD 2012 and I ran into one problem which I didn't encounter before.
The problem is that when I try to paste objects from another drawing (through clipboard - usually another instance of AutoCAD) I can't paste them in some drawings only.
The following things happen:
-Autocad behaves normally like when I usually paste objects except there is nothing inserted.
-When I save the drawing after unsuccessful insert, even if I canceled inserting, drawing size increases dramatically (for about 2-4MB).
-If I open new drawing, I can insert objects there.
-Also when I copy to clipboard, autocad takes a lot of time even if it is only few lines.
I tried these thing to fix issue:
-I checked if there are any layers turned off.
-I tried to copy with COPYBASE
-I restarted autocad (sometimes it works but only for some moments or for one insert).
-I did PURGE and AUDIT
-I tried to copy paste in same instance of AutoCAD but that didn't work.
I'm usually using t least 2 instances of AutoCAD (I hope that is not the problem).
AutoCAD 2010 :: Copy To Clipboard Failed
Jun 2, 2009I am trying to copy some items in cad but I keep getting the error ' copy to clipboard failed'.
View 9 Replies View RelatedAutoCAD 2010 :: Copy / Paste Via Clipboard?
May 9, 2013I am having an issue while trying to copy/paste via clipboard. I copy (with or without basepoint) on one drawing then try to paste to another drawing using ctrl v. the first two times, the object pastes. On the third attempt my cursor looks like it is trying to paste something and if I move near an object on the drawing it snaps to points, but no object pastes. After doing so I check my layer manager and the layers involved with this action do paste. After a few attempts with no luck, a weird object I have never seen before appears.
I have tried to purge and audit as well as copying the whole drawing to a new drawing but have had no luck.
Side note, after ctrl v is pressed (or ctrl shift v) the command line says something about duplication of some block name ignored.
AutoCAD 2010 :: Pasting Block From One Drawing To Second Using Clipboard Method
Jul 4, 2013When pasting a block from a drawing to a second drawing using the clipboard method the block pasted in with components of block in different area of drawing but still linked together. This even happened in the same drawing.
View 9 Replies View RelatedIllustrator :: Colour Option Keeps Changing Back To Grey Scale
Jan 2, 2014I imported a photo into illustrator CC and I then live traced it and expanded it. When I select it the colour options are grey scale. I can change the option but if I click off the image the options go back to grey scale. The doc colour set up is cmyk. How do I get it to stay on a different option without having to keep switch it all the time?
View 4 Replies View RelatedAutoCAD 2010 :: This Drawing File Doesn't Allow Copy To Clipboard Or Even Binding
Aug 22, 2012This drawing file doesnt allow copy to clipboard or even binding on to other drawing. It was originally sent to us from another company, I have deleted all the objects and layers, purged it. If I create a new line or other object, Ctrl+C doesnt work.
View 2 Replies View RelatedAutoCAD Inventor :: Cannot Create Thread Hole (thread Option Is Grey Out)
Apr 22, 2013My colleague installed IV2013. He has excel 2010 installed in his PC also. However he cannot create thread hole (thread option is grey out).
View 4 Replies View RelatedAutoCAD 2010 :: How To Set XRef To Color Grey
Jun 28, 2012I have a few xrefs loaded into my drawing and I want them all to appear greyscale (color 9) so that whatever I draw on top of the xref is in color and is easy to spot..
I have tried putting the xref on a layer that is default color 9 but the xref is still shown in color. How to set the xref to color grey?
AutoCAD 2010 :: Colored Layers Showing Up Grey
Oct 27, 2009The layers that are colored will show up only some of the time. Any other time they are gray. Where do i go to fix that?
View 8 Replies View RelatedAutoCAD 2010 :: How To Change Light Grey Wash In Paperspace
Aug 22, 2012How to change the light grey wash in paperspace i still want to have my paper as white and a different colour to the side not an entire white page then it just looks like my modelspace.
View 3 Replies View RelatedAutoCAD 2010 :: Angled / Curved Lines Appear Grey In PDF Export
Jan 23, 2013I've recently had to export DWG files to PDF and the lines print in black whether they are angled/curved or straight. The problem I'm experiencing is that a number of objects that have been rotated at an angle or lines that are curved appear dark grey on the screen in PDF format. I'm using the DWG to PDF. pc3 with monochrome setting selected. I've checked the Plot Style Table Editor and all colours have been selected to print 'black'; greyscale is 'off' and screening is at 100%. Is this a 'bug' or is there a fix for this problem?
View 6 Replies View RelatedAutoCAD 2010 :: Angled / Curved Lines Appear Grey In PDF Format
Jan 23, 2013I've recently had to export DWG files to PDF and the lines print in black whether they are angled/curved or straight. The problem I'm experiencing is that a number of objects that have been rotated at an angle or lines that are curved appear dark grey on the screen in PDF format. I'm using the DWG to PDF. pc3 with monochrome setting selected. I've checked the Plot Style Table Editor and all colours have been selected to print 'black'; greyscale is 'off' and screening is at 100%.
View 9 Replies View RelatedAutoCAD Print / Plot :: Plotting Grey Instead Of Black LT 2010?
Aug 11, 2011how to stop AutoCAD Lt from ploting in grey... it doesnt seem to make sense to me why this is happening. We use to have Autocad 2007 and a lot of the files that we still work from were created in that. Everytime files are now plotted to pdf parts of the drawing appear a very light grey as oppose to black which is how they appear on the screen. In the plot style table in the page setup they are also black - and I have tried changing it from monochrome to custom pen assignments, nothing seems to change it. The files are usually in stb as oppose to ctb. whole page prints black or the colours that I have actually clicked on?
View 2 Replies View RelatedAutoCAD 2010 :: Copy Elements Of Files In Drawing - Copy To Clipboard Failed
Jan 11, 2013i have various files which I cannot copy elements of into other drawings.
when i use the ctrol+copy command, I get the "copy to clipboard failed". This has only started since I upgraded to AutoCAD2012.
AutoCAD 2010 :: Plot Drawing And Grey Lines Are Printing On Top Of Black?
Apr 9, 2013Im trying to plot a drawing and the grey lines are printing on top of black. how do I get black to print on top of grey? I am using MEP2013
View 4 Replies View RelatedAutoCad :: Object Set To Plot Grey (any Grey) In Paper Space
Jun 13, 2013I am currently running Map 3D 2012 with CadWorx and I am having an issue with one of my multi tab drawings. Any object set to plot grey (any grey), that is in paper space, is plotting black only in one of my layouts. similar objects in model space and in both spaces on other layouts are all plotting accordingly.
View 0 Replies View RelatedAutoCAD 2010 :: Grey Lines Flick White When Working In Large Dwg / Cutting And Pasting As Block?
May 4, 2012when I am working on a large drawing and/or pasting as a block, all the grey lines (colour 8) turn to white. When I select a grey line, it flicks back to grey, but de-select, and it's white again.
If I toggle on hardware acceleration, the problem is fixed for a short while, and also if I turn it off, it is fixed for a short while, and also if I save, close and re-open it's good untill I paste a block....
I suspect it may be because of my setup and an un tested graphics card:
Windows 7 64 bit Ultimate - running through bootcamp on a macbook pro
Autocad 2012 Lt
Machine Configuration
---------------------
Processor Speed : 2.2 GHz
RAM : 8103 MB
3D Device
---------
Name : AMD Radeon HD 6750M
Manufacturer : AMD
Chip set : Radeon HD 6750M
Memory : 707 MB
Driver : 8.17.0010.1063
Your machine contains a 3D Device that is not certified.
AutoCAD 2010 :: DWG To PDF Option While Printing Is Missing
Feb 8, 2012Actually on one of my draughtsman's computer, when he hits Ctrl + P, he is unable to see DWG to PDF option in the drop down menu, have I fortgot to install some feature because for rest of my draughtsman they all are getting that option.
View 3 Replies View RelatedAutoCAD 2010 :: Shaded Plot Option
Dec 16, 2012i want to know how to enable those options for shaded plot.
View 1 Replies View RelatedAutoCAD 2010 :: Snap Rotate Option
Mar 4, 2012I am working through an AutoCAD training book and on one exercise it tells me to use the Snap Rotate Option and select points A as the new origin and point E as the rotation angle. The problem is that I can't find this Snap Rotate control anywhere.
View 6 Replies View RelatedAutoCAD 2010 :: DimAngular Option To Always Dim From Horizontal?
Nov 27, 2012I need to dimension numerous angles in a drawing, but I have a constraint on where I need the dimension to start from. I'm looking for the "least number of mouse-clicks" solution on this, since it's angles.
I need the dimension to always start from a quadrant, preferably 0 degrees.I'd prefer to simply pick (1) line and have AutoCAD auto-magically dimension that line from 0 degrees, rather than my having to draw short horizontal lines at each of these lines, then pick each one inside the DIMANGULAR command.
Photoshop Elements :: Alter Background Colour From GREY To Lighter Grey As In Album 2.00
Dec 27, 2012can I alter the BACKGROUND COLOUR from the Grey to a lighter grey as in P/Shop Album 2.00 which is just what I want..I hate the darker colour as background..I have just purchased the Elements 11.
View 5 Replies View RelatedAutoCAD 2010 :: Any Option To Export 3D Graphic To AutoMOD?
May 4, 2012I'm trying to export 3D models from AutoCAD 2011 to AutoMod Simulation software. However, every different export filetype that I try does not allow me to bring the model into AutoMod and still have the colors that the model had in AutoCAD. For example, If I create a car and it has several colors for the metal, the wheels, and the windshield, it brings it over as a single block, all in red. I'm not sure how to fix this. In the old models, I used to use 3DSOUT command, but that doesn't look like an option any longer.
View 3 Replies View RelatedAutoCAD 2010 :: CHSPACE Command - Copy Option?
Oct 10, 2013Version of the CHSPACE.lsp command that has a "copy" option like the one from Intellicad?This version makes a copy of the selected objects first then moves them into the space you want, leaving the original objects alone in their original space.
View 3 Replies View RelatedAutoCAD 2010 :: Join Option In Loft Command?
Mar 12, 2013"Join" option in "Loft" command.
View 2 Replies View RelatedAutoCAD 2010 :: Multileaders And Extend To Text Option
Dec 15, 2011I am in no way an expert in ACAD.We are experiencing "random" problems where we have a multileader with left justified text and the leader extension option turned on. There is probable a common trait with all the offending leaders but we are yet to see it.
Basically, with some leaders, the landing length is being set to a negative value. We have only noticed this since we turned on the extend leader to text option. The result of this is that the leader lines can sometimes cross through the text. Sometimes we fix them, then they revert to a negative value again when we close the drawing.
We can, of course, uncheck the extension option in the drawing and the problem appears to go away. However, we have unchecked this option in our templates now, but when we open a new drawing based on the updated templates, the option is checked again.
AutoCAD 2010 :: Dimension Layer - Way To Turn Off This Option
Oct 17, 2012When I go to do a dimension it changes to the dimension layer and then I have to change back to my object layer is there a way to turn this option off?
View 3 Replies View RelatedAutoCAD 2010 :: Command And Option Settings In File
Jan 19, 2012“Command” and “Option” settings in the AutoCAD...Is there a way to save the “Command settings” and the “Option settings” in the file but not on the “AutoCAD program”?
Examples:
The default of the “Isolate” command is “Lock and fade” For me I prefer to switch the this setting to be “Off”The default value of the command “FIELDEVAL” is 13. For me I prefer to switch the this setting to be “Off”The default setting of the “default mode” is “shortcut menu”. For me I prefer to switch this setting to be “repeat last command” ( I go to options>>user preferences”>>Windows standard behavior>>Right click customization>> default mode>>repeat last command. Is there a way to save these settings on the file such that if we open this file in another computer then we don't need to set them again?
In other words, why aren't the “Default settings” “Option settings” saved on the file the same way the “Drafting Settings: like sanps, Osanps” are?
AutoCAD 2010 :: Copy / Paste Option NOT Working
Oct 17, 2013When I try to copy and pate any element within the same drawing it won´t paste it will say: "specify insertion point" and I´ve given up.
I tried PICKFIRST but it is set to 1, also tried checking if it would fit in my screen or if the zoom was messed up, but nothing works!