This drawing file doesnt allow copy to clipboard or even binding on to other drawing. It was originally sent to us from another company, I have deleted all the objects and layers, purged it. If I create a new line or other object, Ctrl+C doesnt work.
View 2 Repliesi have various files which I cannot copy elements of into other drawings.
when i use the ctrol+copy command, I get the "copy to clipboard failed". This has only started since I upgraded to AutoCAD2012.
I just got Gimp 2.8 for Mac. I can open a picture, do a blur and export. The copy paste is giving me problems. It worked once. I make a selection with the rectangle and do a control c. I also tried the menu. The selection doesn't go to the clipboard. After 6 tries, the same original copy was the only one in there.
View 1 Replies View RelatedI am trying to copy some items in cad but I keep getting the error ' copy to clipboard failed'.
View 9 Replies View RelatedI am having an issue while trying to copy/paste via clipboard. I copy (with or without basepoint) on one drawing then try to paste to another drawing using ctrl v. the first two times, the object pastes. On the third attempt my cursor looks like it is trying to paste something and if I move near an object on the drawing it snaps to points, but no object pastes. After doing so I check my layer manager and the layers involved with this action do paste. After a few attempts with no luck, a weird object I have never seen before appears.
I have tried to purge and audit as well as copying the whole drawing to a new drawing but have had no luck.
Side note, after ctrl v is pressed (or ctrl shift v) the command line says something about duplication of some block name ignored.
I somehow lost the toolbar with the "copy to the clipboard" and "paste from the clipboard" icons.. which tool bar i need to turn back on?
View 2 Replies View RelatedI am having a strange issue with a specific file. If I copy to clipboard any element in this file it locks up. If I wblock the drawing, it locks up. If I open a blank file and select an element and drag and drop it in to the new blank file, it works fine.
If I copy to clipboard the droped element in the new file it works fine. It is local to this one file. This one file is most probably a 2008 file originaly, opened and saved to 2012.
What gremlins should I look for from older verstion to newer version that would cause this issue?
When pasting a block from a drawing to a second drawing using the clipboard method the block pasted in with components of block in different area of drawing but still linked together. This even happened in the same drawing.
View 9 Replies View RelatedI'm attempting to copy paste a block and a line from one tab to another in the same drawing and it doesnt appear. I get
Command: _pasteclip Duplicate definition of block _Oblique ignored.
Duplicate definition of block _ArchTick ignored.
Duplicate definition of block attr_FFL ignored.
i've purged, i've audited, i've even created a new drawing and transfered the information but im still getting this problem.The strange thing is occasionally it works.also, i purge so the drawing it is clean, then i try to paste, then when purging again 1000's of blocks appear in the purge diologue box. A49285 to A55404 & a block called A$C4E2C21A4
I have binded an alignment drawing into another drawing. I am still able to use the alignments for calculations however they do not show up in toolspace. What is the reason for this? Can i export the alignments and import them without having issues now?
View 5 Replies View RelatedEventually after I copy and paste with the clipboard enough times within one drawing, the ability goes away and I can no longer copy and past one item from one drawing to a separate drawing. I need to use the clipboard function because that is the only way of getting an item from one drawing to another.
I have download a clear clipboard function but it doesn't work. Closing CAD and restarting does not reinstate the function.
How to bind/join an image file to an Inventor Drawing?
View 2 Replies View RelatedIm using autocad 2008 and i'm having difficulty in binding xref. i've been usign autocad for 3years now but sad to say, it's my first time to try binding xref.
So here's the scene, got xref file, then bind it, and then the whole xref drawing disappear but the xref filename is still in the list at the xref pallette? What should i do?
I have a keyboard shortcut for Copy (see directly below). This command doesn't copy multiple. But if I type "Copy" at the comment prompt (AutoCAD 2013) the copy multiple is the default. Copymode is already set to "0".
(DEFUN C:C()
(setvar "SNAPMODE" 1)(COMMAND "_COPY")
(PRIN1)
)
When using the Clipboard to move entities from one drawing to another I need to open the window Tools; Options; and that's it for the Paste as Block and Paste Options to be available. What I mean is do I need to do this with each new session of LT? That I will need to check out. I tried my Template and it allowed Paste without going to the Options Dialog in the same session.
Object selection limit for display of grips is set to 32,000
I am trying to copy some object from drawing but it's saying Copy to Clipboard failed!
View 3 Replies View RelatedI am working on a project which up until recently used Excel VBA and AutoCAD. To the point, one of the important things this process did was grab a range of cells in the Excel file and copy them to the clipboard. This range of cells was a nicely formatted table with borders, cell filled colors, etc... and the VBA code would copy it to the clipboard before laumching AutoCAD. Once AutoCAD was opened a LISP program would automatically paste this into the model space. It made a lovely OLE object in AutoCAD with crisp, clear appearance.
We are now trying to do away with the VBA part in favor of .NET. I am really at a loss to explain why the code I used before will not work, nor will anything else I try:
VBA CODE
Sheets("Sheet2").SelectRange("B1:K93").Copy
VB.NET CODE
vExcelRange1 - vExcelSheet2.Range("B1:K93")vExcelRange1.Copy()
The .NET code is not working at al.
Whenever I select some objects in an AUTOCAD drawing and Press Ctrl+C to copy them for taking it to any other file, it gives error "COPY TO CLIPBOARD FAILED."
However, this error is not for all the files but in some of the files. After much tweaking and researching on my own, I found out that this happens in files in which I have set viewports in LAYOUT. When i delete the entire LAYOUT by right Click + Delete, and then go to MODEL and do Ctrl+C, the copy to clipboard happens in normal way.
Why do I get the error when I have set viewports in LAYOUT ?
Is there anyway to copy an alignment from one drawing to another?I want to copy the alignment but not have it come in as a alignment just an object line
I don't want to spend the time drawing a PL over the top of it (its a very complex) then copying that.
when i copy paste another persons drawing into mine,all the xrefs get placed well away from the the original drawing.
View 7 Replies View RelatedI am using AutoCAD Architecture 2011 and am trying to export a file to a previous version (after i bind xrefs) so I can play with it in Sketchup. When I go through and have it export and chose the file name and location, nothing happens. I don't even get an error message and no file was created. To work around this, I was hoping to copy/paste the drawing into a new file to export from there but when I copy I get an error message that says "Copy to clipboard failed".
I audited, purged, audited, purged, restarted my computer and CAD. All this works fine on other files in the project so I'm guessing the problem lies within this particular file.
I've been teaching myself inventor over the past couple of months so I can design the rear suspension setup for my car.
I've got the IRS modelled with enough detail to show my engineer the concept, but I want the suspension to "work", ie each link will move as the suspension flexes.
I'm attaching the arms (blue, dark green, red and yellow) to the cradle (orange) using the joint command, and selecting "rotational". This works fine and the arms can swivel about a single axis as they should. But as soon as I attach the knuckle (lime green) to the other end of all the arms using the same type of joint (except the joint with the blue lower control arm, which is a ball joint), nothing will move.
I understand that in real life, each joint has a bit of "slop" in it, allowed by rubber bushings, which prevents the whole setup from binding.
To my uneducated mind, the solution would lie in one of 3 methods: Convert all the joints to ball joints (I'd like to avoid this if possible) Add some kind of flexible rubber bushing to all of the joints (probably not possible) Get rid of the rotational joint constraints altogether and somehow mate all the parts to each other using work points, rather than a cylindrical bolt and eyelet, so that each arm has full range of movement in both the X and Y axes.
You can copy both the surface and the original (in this case contour polylines) data or only the surface. In both cases paste operation results into a copy of both data and surface.
Ok, But when paste and rebuild, the distance from original base point and destination point is applied in turn to the surface itself. Maybe it is a BUG ?
Civil 3D (2013)
You'd think that being able to copy and paste would be a fairly straightforward task in any piece of software. Not in AutoCAD 2013. The Help file says the commands are located on the 'Clipboard' panel, under the 'Home' tab. I've spent a lot of time searching and can't find them, nor can I find any information about how to turn such a panel on.
This is the sort of thing that shouldn't be a problem in a well-designed piece of software. We're finding AutoCAD 2013 to be almost unusable out of the box, and have to spend ages fiddling with the (clunky) Custom User Interface commands to make it work. Every time AutoDesk bring out a new version of AutoCAD it seems to get even worse. I could resort to keyboard commands, but shouldn't have to. I'm starting to think the best solution would be to invest in a copy of Vectorworks instead.
Having a problem copy selection with base point and trying to past it in another drawing...
View 2 Replies View RelatedI have had this problem many times with both CS6 and CS5. I'm not sure if this is a Photoshop question or a Windows OS 8 question but anyways it seems to only happen with Photoshop.
I copy an image offline to edit in photoshop. After I'm finished I save it and delete the image layer from the workspace to get ready for the next image. I grab another image that I want to paste in the same photshop workspace. When I paste, it pastes the same image I copied first. It even does this when I restart Photoshop, so that's why I think it may have to do with Windows Clipboard.
I'm also really interested in details about how 'Copy/Paste" and the "Clipboard" work with different programs so I can best understand how to utilize it with what seems to be a simple tool, yet I still find myslef with questions because I don't filly undertsnad it.
Have several pages that I'd like to copy to a new drawing file. I care about paper space info. Not concerned with model space or view ports.
View 6 Replies View RelatedIs there any way to copy a viewport that includes model space and paper space at the same time to another drawing?
View 5 Replies View RelatedThe file autocad 2010 (dwg) that I've been working for ages doesn't open. It starts loading but then get stuk on 96%. I tried to recover it and no errors are detected.
View 9 Replies View RelatedI can't find the option to copy an image from LR's library to the clipboard - I'm sure I'm just overlooking it -
View 9 Replies View RelatedWhen I try to create a new font style using the standard Autodesk Swiss fonts, I get the message "font file doesn't exist". I can see that the fonts are in the AutoCAD fonts folder and that I have a file path set to that folder.
View 3 Replies View Related