AutoCAD 2010 :: Copy And Paste Wait?

Feb 2, 2012

using map 3d 2012 with windows 7 and when copy and try to paste it takes roughly 3.5 minutes. 

View 1 Replies


ADVERTISEMENT

AutoCAD 2010 :: Copy / Paste Via Clipboard?

May 9, 2013

I am having an issue while trying to copy/paste via clipboard. I copy (with or without basepoint) on one drawing then try to paste to another drawing using ctrl v. the first two times, the object pastes. On the third attempt my cursor looks like it is trying to paste something and if I move near an object on the drawing it snaps to points, but no object pastes. After doing so I check my layer manager and the layers involved with this action do paste. After a few attempts with no luck, a weird object I have never seen before appears.

I have tried to purge and audit as well as copying the whole drawing to a new drawing but have had no luck.

Side note, after ctrl v is pressed (or ctrl shift v) the command line says something about duplication of some block name ignored.

View 2 Replies View Related

AutoCAD 2010 :: 2012 Often Will Not Copy And Paste

Jul 10, 2013

My AutoCAD often will not copy & paste. It prompts for insertion point and when picked nothing appears. This happens on many different drawings. Windows 7.  

View 2 Replies View Related

AutoCAD 2010 :: Copy And Paste To Original Coordinates

Nov 20, 2012

I am currently designing a kitchen with a complete floor plan. I had requested some accessories files from a company called Pearl works and they sent me each file that I requested. The problem is that when I copy and paste each image file into my existing floor plan, they all show up as the same image and not the seperate images that should appear. Am I doing something wrong with the clipboard process?

I have also tried deleting the drawing and re-inserting a different file and when I do every file thereafter is the same as the one that I just switched.

View 9 Replies View Related

AutoCAD 2010 :: Copy / Paste And Delete Don't Work

May 9, 2012

I've got a user that when he clicks on an item to highlight it, he can't drag it anywhere, can't copy and paste it, and can't delete it. I've uninstalled and resinstalled the application more than once.  After an uninstall, I went through all directories and deleted all remaining files and folders that had either Autodesk or AutoCAD in the name and spent 1 1/2 hrs sifting through the registry and eliminating all Autodesk and AutoCAD entries.  I then reinstalled the application (AutoCAD 2010), and the user is still having the same issues. 

OS: Windows XP SP3

Product: AutoCAD 2010

View 9 Replies View Related

AutoCAD 2010 :: Copy Paste Very Slow On 2012?

Aug 12, 2013

When I copy and paste on Autocad 2012, it goes very slow.

I installed the service pack, I tried removing the layer filters and a few other fixes that are out there. The machine is powerful enough to handle the application.

I tried reinstalling the application and that didn't do anything. The DWG file that's on the network share is being used by other people without any issue, I'm the only one having this problem.

View 3 Replies View Related

AutoCAD 2010 :: Possible To Copy And Paste Visio Objects Into DWG?

Sep 21, 2012

I have objects in Visio that I want to place into an AutoCad DWG. They can go in as a block. How do I do that?

View 6 Replies View Related

AutoCAD 2010 :: Copy / Paste Option NOT Working

Oct 17, 2013

When I try to copy and pate any element within the same drawing it won´t paste it will say: "specify insertion point" and I´ve given up.

I tried PICKFIRST but it is set to 1, also tried checking if it would fit in my screen or if the zoom was messed up, but nothing works!

View 9 Replies View Related

AutoCAD 2010 :: Xrefs Placed Away When Copy / Paste Drawing

Mar 6, 2012

when i copy paste another persons drawing into mine,all the xrefs get placed well away from the the original drawing.

View 7 Replies View Related

AutoCAD 2010 :: Copy Selection With Base Point And Paste It In Another Drawing?

May 23, 2012

Having a problem copy selection with base point and trying to past it in another drawing...

View 2 Replies View Related

AutoCAD 2010 :: 2012 Freeze Or Long Lag With Copy / Paste And XREF Placement

Feb 9, 2012

- Dell XPS 8300 running Windows 7 SP1 64-bit with 12 GB of RAM

- AMD Radeon HD 6800 Series with updated drivers installed

- AutoCAD 2012 64-bit SP1

- ACAD Hardware Acceleration is ON

This hotfix is already installed.

This particular file (and a few others) has an issue whereby the computer pauses for a LONG time whenever an XREF is placed OR a copy/paste system command is executed (not the COPY AutoCAD command, but Ctrl+C/V). I have audited and purged the file; there are no audit errors. I also tried recovering the file and it made no difference.

I checked one of the problemmatic files on my machine (different machine but still AutoCAD 2012 and Win7) and the same file has the same issues.

New files do NOT have this problem. I have attached the file. Steps to recreate the problem:

1. draw a simple rectangle

2. try to copy/paste it with ctrl+c/v

3. this other machine and my machine both pause for 8-10 seconds

I'm confident that it's something in the file, but I don't know how to track it down.

View 3 Replies View Related

AutoCAD 2010 :: Open DWG - Wait For The Command Line To Scan For

Dec 31, 2012

Every time i open some drawings i have to wait for the command line to to scan some files or something.

It is very similar to this one but it is not solved. [URL] .....

here is what the command line writes every time: 

(setq flag nil)
(setq flag1 t)
(if (findfile target)
(progn
(setq wjm1 (open target "r"))

[Code] .....

View 4 Replies View Related

AutoCAD LT :: Copy And Paste Jpg In Dwg

May 2, 2012

I have autocad lt 2009, previously when I wanted to trace a drawing I would go to paint, copy the drawing and then paste it in autocad on one layer and do the drawing on another layer worked great, But now when I do the same process it doesn't work.....previously I could draw on the image, could edit the lines, copy, erase, move etc. But now when  do this if I have to copy a line I select copy and when I click on the line I want to copy the jpg drawing goes away, or if I try to erase a line the drawing will get deleted, Do I need to uninstall autocad and reinstall?

View 5 Replies View Related

AutoCAD LT :: Clipboard Copy / Paste

May 20, 2011

When using the Clipboard to move entities from one drawing to another I need to open the window Tools; Options; and that's it for the Paste as Block and Paste Options to be available. What I mean is do I need to do this with each new session of LT? That I will need to check out. I tried my Template and it allowed Paste without going to the Options Dialog in the same session.

Object selection limit for display of grips is set to 32,000

View 9 Replies View Related

AutoCAD LT :: Slow On Copy / Paste

Jun 24, 2010

One of our AC08LT workstations is very slow on Copy / Paste command... Not bound to one dwg... Happens with any dwg.

View 4 Replies View Related

AutoCad :: Cannot Copy And Paste Between Drawings

Nov 21, 2006

I'm using Autocad 2002.

I am having trouble copying out of a drawing (model space) which i received from someone else, and pasting into my own. The properties on the original dwg file suggest it was created Sept 2001. It appears to copy OK (copyclip/copybase), but when i jump into my file and try to paste, the command line just reads:

_pasteclip

and nothing appears in my model space.

I've tried zooming extents, exploding the original, changing layers and line types etc into the same as in my own dwg. I've also tried to convert/save the dwg file into dxf's and other version dwg's....without success.

I have about half a dozen drawings received from the same source, and they all let you copy data into them, but won't let you copy/cut out.

View 8 Replies View Related

AutoCAD LT :: Copy And Paste Commands

Oct 4, 2013

I have been having a problem with AutoCad 2012 LT when a am working in the model space I can you the ctrl c and ctrl p commands for a short amount of time and then they will not work. I can open a different model space and they will work in that one, but when I go back to the original one the will not work. I have tried shutting down autocad and the computer, but when I open everything back up the commands still will not work in that model space. I have reinstalled autocad and that brings them back for a short amount of time.

View 5 Replies View Related

AutoCAD Inventor :: Copy And Paste Constraints

Aug 12, 2012

is it possible to copy and paste parts in an assembly but also keeping any constraints set on the part?

I.e. if I had a square block constrained to a flat face of a floor, when I copy and paste the block many times I would like all the copy blocks to still be constrained to the floor.

View 1 Replies View Related

AutoCAD LT :: Manipulate JPEG - Copy And Paste?

Apr 10, 2012

LT 2011- I place a JPEG of a logo on my sheet in model space. Is there any way to manipulate it as in moving it, making it a tad smaller, etc.? Am I able to copy and paste it

View 1 Replies View Related

AutoCAD LT :: Copy And Paste Symbols Become Invisible

Aug 2, 2013

Using copy and paste to add symbols to a layer, after a point the symbols will no longer paste.

View 3 Replies View Related

AutoCAD LT :: 2012 Copy And Paste Not Working?

Aug 10, 2012

I have recently upgraded to AutoCAD LT 2012. The copy/paste function and the group/ungroup function are not working. I have run service pack 2 with no improvement.

View 9 Replies View Related

AutoCAD Inventor :: Copy And Paste Symbols In One IDW To Another

Jun 27, 2013

I have one big problem copy and paste symbols in one idw to another idw it takes to much time.it's possible through macro or ilogic for copying symbols in drawings?

View 4 Replies View Related

AutoCAD Civil 3D :: Copy / Paste Latency

Jul 18, 2013

Me and some fellows at work have been noticing a significant increase in the time it takes to copy with base point and paste into a different drawing file. Maybe it is just the 2012 version of the software , what has changed or how to minimize the time this takes. I don't see any reason it should take up to a minute to copy a few polylines from one drawing to the next.

View 5 Replies View Related

AutoCAD 2013 :: Unique Copy N Paste

Jul 15, 2013

I cannot seem to paste into this one drawing that a client has issued to me. I can paste into all associated x-refs just fine, but the main drawing is the issue. Before we get into things I have tried all the most common things already.

-  I have checked layeer Visibilties and unreconciled layers.

- I have run audit and have purged/scalelistedit all drawings

- I have done almost everything ><

To sum it up I think it is global variable of some sort.

View 9 Replies View Related

AutoCAD 2013 :: Copy / Paste From One Drawing

Oct 19, 2012

We installed 2013 version of Autodesk Civil3D, and strange things with Copy/Paste from one drawing to another happend!

If I try to copy some autocad objects like solid HATCH for ex,. from one file to another - I select drawing copy from, select Hatch, press Ctrl+C or rightclick > Clipboard > Copy, then select destination drawing, press Ctrl+V or rightclick > Clipboard > Paste, and I see in command window: 

" _pasteclip Duplicate definition of block _Closed ignored.Duplicate definition of block _DotBlank ignored."The time interval is very long for single hatch copying.

 I tryed audit/purge, and copying the HATCH again,  - and now I see in destination drawing some strange array of LINE obects, it is not my HATCH!  AutoCAD always starts do temporary save while doing this copy.

Else, if I open new two pure drawings, and start copy any types of acad objects between each other, so all works fine and quickly, no temporary saves, only remarkable pause starts  above  20000 object copying, its quite acceptable for me, and still shorter time, than copy a single HATCH.  

I suppose the problem is in drawing file, because if we make purge/audit than save and reopen drawing - sometines is it possible to copy, but after all we need to do this each time we want to copy acad objects to another file. This annoying issue have our another team members too, it prevents to do our job. 

I found, that with HATCH object some blocks is ALWAYS copying  from one file to another.

View 9 Replies View Related

AutoCAD LT :: ARX ERROR - EDuplicateKey (Copy / Paste)

Jan 10, 2012

I have 2006 AutoCAD LT and have been trying to copy and paste something from one drawing to another and

ARX ERROR: eDuplicateKey

keeps popping up!

View 1 Replies View Related

AutoCAD Inventor :: How To Copy / Paste A Loft

Jul 24, 2012

Okay I've been building random things to teach myself how to use Inventor and right now I'm stuck on a rim I'm creating. My question is.. is there a way to copy and paste a lofted item since there are three parts to it (2 planes and 1 guide) because I need 4 more spokes and if I copy the loft it copies all three parts seperately. Then when I paste and orientate the small end of the loft to the plane I want it tells me "Unsatisfied Geometric Inputs". 

View 4 Replies View Related

AutoCAD Inventor :: Can't Copy And Paste Leader

Jul 24, 2013

Ever since updating to the latest service pack I can no longer copy and paste leaders inside a drawing. 

I used to be able to set up the leader I wanted and then copy and paste to all the parts I wanted to assign it to but I can't paste anymore. 

I am using the iproperties data within the text box..

Inventor 2013

View 2 Replies View Related

AutoCAD 2013 :: Copy And Paste Scaling

Oct 31, 2013

I still have a problem with copy and pasting drawings in the right units. I checked discussions but nothing seems to work. To make things less confusing for me I'll explain the situation in detail:

- I have a drawing file, in metres, that I want to copy to another file.

- My second drawing, in inches, is where I want to paste the drawing from the first file.

Let's say I have a line that's 1 m in the first drawing. When I paste onto the second drawing, it pastes as 1 in.

I tried insunits, units, etc. but it always comes out small when I paste it. Manually scaling the files will lose the accuracy.

View 6 Replies View Related

AutoCAD .NET :: Copy Paste With New Block Definition

Sep 8, 2011

I'm trying to develop one tool with that objective:

View 9 Replies View Related

AutoCad :: Copy / Paste Certain Amount Of Text?

Feb 7, 2012

Using Autocad_2k10 and ScriptPro

Trying to write a srcipt to copy/paste a certain amount of text in these coordinates (ie.: 1.8520, 13.1085, 0.0000) in 100+ drawings to a file (ie.: 123.txt or 123.xls)

I'm stuck on the "paste to file", is this possible?

I'm using ScriptPro cause of the batch process.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved