AutoCAD 2010 :: 2012 Freeze Or Long Lag With Copy / Paste And XREF Placement
Feb 9, 2012
- Dell XPS 8300 running Windows 7 SP1 64-bit with 12 GB of RAM
- AMD Radeon HD 6800 Series with updated drivers installed
- AutoCAD 2012 64-bit SP1
- ACAD Hardware Acceleration is ON
This hotfix is already installed.
This particular file (and a few others) has an issue whereby the computer pauses for a LONG time whenever an XREF is placed OR a copy/paste system command is executed (not the COPY AutoCAD command, but Ctrl+C/V). I have audited and purged the file; there are no audit errors. I also tried recovering the file and it made no difference.
I checked one of the problemmatic files on my machine (different machine but still AutoCAD 2012 and Win7) and the same file has the same issues.
New files do NOT have this problem. I have attached the file. Steps to recreate the problem:
1. draw a simple rectangle
2. try to copy/paste it with ctrl+c/v
3. this other machine and my machine both pause for 8-10 seconds
I'm confident that it's something in the file, but I don't know how to track it down.
View 3 Replies
ADVERTISEMENT
Jul 10, 2013
My AutoCAD often will not copy & paste. It prompts for insertion point and when picked nothing appears. This happens on many different drawings. Windows 7.
View 2 Replies
View Related
Aug 12, 2013
When I copy and paste on Autocad 2012, it goes very slow.
I installed the service pack, I tried removing the layer filters and a few other fixes that are out there. The machine is powerful enough to handle the application.
I tried reinstalling the application and that didn't do anything. The DWG file that's on the network share is being used by other people without any issue, I'm the only one having this problem.
View 3 Replies
View Related
Feb 28, 2012
why does it take ages to copy and paste from one drawing to another
View 3 Replies
View Related
Feb 18, 2013
I am having trouble with Adobe Illustrator "copy" and "paste" functions. It take a very long time (as long as 30 min) to copy a simple line and even longer to paste it. This probles is getting worse. My file size is unusual as well. A comparable file is 155k and this one is up to 65 meg and growing.
View 20 Replies
View Related
Aug 10, 2012
I have recently upgraded to AutoCAD LT 2012. The copy/paste function and the group/ungroup function are not working. I have run service pack 2 with no improvement.
View 9 Replies
View Related
Jan 29, 2013
In the past (using Autocad 2007), I could copy my AutoCAD drawing and paste it into a sketch in Solidworks. Since my company updated to AutoCAD 2013, I can't seem to paste anything into the Solidworks sketch.
View 1 Replies
View Related
Jan 23, 2012
I wonder if its possible to Xref in DWG TrueView 2012, right now I can only open either the "Building drawing" or the "Plumber drawing" and I need to see them both.
Can I Xref or is it any other way to solve my problem?
View 2 Replies
View Related
Oct 31, 2012
I'm in AutoCAD 2012. This xref won't go away. I've done the obvious fixes but can't get rid of it.
View 4 Replies
View Related
Feb 2, 2012
using map 3d 2012 with windows 7 and when copy and try to paste it takes roughly 3.5 minutes.
View 1 Replies
View Related
May 9, 2013
I am having an issue while trying to copy/paste via clipboard. I copy (with or without basepoint) on one drawing then try to paste to another drawing using ctrl v. the first two times, the object pastes. On the third attempt my cursor looks like it is trying to paste something and if I move near an object on the drawing it snaps to points, but no object pastes. After doing so I check my layer manager and the layers involved with this action do paste. After a few attempts with no luck, a weird object I have never seen before appears.
I have tried to purge and audit as well as copying the whole drawing to a new drawing but have had no luck.
Side note, after ctrl v is pressed (or ctrl shift v) the command line says something about duplication of some block name ignored.
View 2 Replies
View Related
Oct 12, 2012
when I trying to publish in single-sheet file. so I type publish on my command bar, then I chose publish to pdf but when i try to click on publish options to set the location where I need to put the pdf files the publish window freeze. same thing when i click on add sheet button.
NOTE: I have this problem especialy when I used AUtoCAD from home. to use AutoCAD from home I made borrow licence.
View 1 Replies
View Related
Nov 20, 2012
I am currently designing a kitchen with a complete floor plan. I had requested some accessories files from a company called Pearl works and they sent me each file that I requested. The problem is that when I copy and paste each image file into my existing floor plan, they all show up as the same image and not the seperate images that should appear. Am I doing something wrong with the clipboard process?
I have also tried deleting the drawing and re-inserting a different file and when I do every file thereafter is the same as the one that I just switched.
View 9 Replies
View Related
May 9, 2012
I've got a user that when he clicks on an item to highlight it, he can't drag it anywhere, can't copy and paste it, and can't delete it. I've uninstalled and resinstalled the application more than once. After an uninstall, I went through all directories and deleted all remaining files and folders that had either Autodesk or AutoCAD in the name and spent 1 1/2 hrs sifting through the registry and eliminating all Autodesk and AutoCAD entries. I then reinstalled the application (AutoCAD 2010), and the user is still having the same issues.
OS: Windows XP SP3
Product: AutoCAD 2010
View 9 Replies
View Related
Sep 21, 2012
I have objects in Visio that I want to place into an AutoCad DWG. They can go in as a block. How do I do that?
View 6 Replies
View Related
Oct 17, 2013
When I try to copy and pate any element within the same drawing it won´t paste it will say: "specify insertion point" and I´ve given up.
I tried PICKFIRST but it is set to 1, also tried checking if it would fit in my screen or if the zoom was messed up, but nothing works!
View 9 Replies
View Related
Mar 6, 2012
when i copy paste another persons drawing into mine,all the xrefs get placed well away from the the original drawing.
View 7 Replies
View Related
May 23, 2012
Having a problem copy selection with base point and trying to past it in another drawing...
View 2 Replies
View Related
Feb 9, 2012
Autocad 2012 copy button freezes once i have finished copying and pressing enter. Just been installed 32 Bit
View 5 Replies
View Related
Jun 6, 2011
Whenever I place a copy or paste from the clipboard AutoCAD freezes for about 5 -8 seconds and is very annoying. Time is money people. I know it's not a RAM issue. I don't have the problem with 2011 when I go back to it. What gives Autodesk? When is the next service pack due? This only happens with teh copy command
View 9 Replies
View Related
Jan 21, 2013
We have our pipe networks living in a master file that is XREF'd to our sheet files. Now, the pipe and structure objects are all the layer C-PNET. The style for the pipes is comprised of the layers C-STRM-PIPE (for pipe walls) and C-STRM-PIPE-PATT (for the center line that is the width of the pipe). When I go into the XREF I cannot freeze OR change the color of the layers comprising the pipe style even though they are all set to ByLayer in the style dialog. The only way to freeze the network is to freeze the layer the pipe network is on C-PNET. However, this presents other problems with our file setup and we dont want to universally freeze C-PNET.
why we cant freeze the portions of the pipe network that are defined in the style as being on C-STRM-PIPE, and C-STRM-PIPE-PATT? If so, how do we remedy this?
View 3 Replies
View Related
Apr 5, 2011
I am using Auto Cad 2011 and I always use the option to 'attach' xrefs. what is the difference between attaching and an overlay? Does one use less memory than the other? When would be the best time to use an overlay?
Also when my new version was installed when I bring in an xref the layers show light (I really like this) another girl in our office has the same version but her layers are still saturated. how does she change it to show ghosted layers in the xref?
is there a way to not have the long list of xref layers when I bring them into a drawing?
View 3 Replies
View Related
Apr 24, 2013
I have the following code that works, most of the time. Actually, it works or completes itself all the time, but there is no "all encompassing" measures incorporated.
All of the reference entities, believe it or not, are on layer "0". There are also some consistent layers, that you can see in the code below. However, a user may create or even remove any layer in the reference drawing. Therefore in my current drawing, I may have layers that are not frozen in the xref.
Like i said, the following code works, but not all encompassing.
(setq filename "7102-002-950 UC10-03")
(setq FreezePRD (strcat filename "|_PRD"))
(setq FreezeSLD (strcat filename "|_SLD"))
(setq FreezeBORDER (strcat filename "|0_BORDER"))
[Code] ........
I guess what I'm looking for is to freeze all layers that begin with "7102-002-950 UC10-03|".
View 5 Replies
View Related
May 8, 2013
In previous versions of Autocad 2008 and earlier you could start a new drawing xref in a drawing then switch to layout and create a viewport that would show the xref. Then you could click inside that viewport and run the FL (freeze layer) command and selectively freeze layers by clicking on them.
In my current version of Autocad Civil 3D 2010, when I follow the same steps as above and run the FL (freeze layer) command inside the viewport, the entire layer contents within the viewport freeze as if everything is on that one layer.
I notice that if I pull up the layer manager box and go down the list of xref'd layers and select the freeze in viewport option for each of the layers I need to freeze it will do what I need to have done, But I'd like to be able to be able to selectively freeze these layers visually within the viewport like I've always been able to do, instead scrolling down a long list of layer names and freezing them that way.
how to do this in Civil 3D 2010?
View 4 Replies
View Related
Oct 26, 2010
I have a few problems with my autoCAD 2010 version on my new computer.When I make a few hatches, there is a possibility that my entire computer freezes and the only way out is a hard shut down of my computer.
The same problem also appeared when I tried to open a drawing direct in autoCAD or when I search the file to make an exref into the drawing.
View 7 Replies
View Related
Oct 16, 2012
Working with inventor pro 2012, whenever I try to run a macro, the program freezes. It happens when I press the tools/macros buttonand it can take 30 sec or more before the macros dialog release and active or I can try to run windows job list which seems to release the jam too.It also happens when I try to run my macro with shortcut key or customized button. It freezes before the macro even loads. If I open the macros editor and run the macro from there (run sub) then there is no delay at all!
Autodesk Inventor 2012 SP1 64-bit, win 7
View 1 Replies
View Related
Oct 16, 2012
Working with inventor pro 2012, whenever I try to run a macro, the program freezes. It happens when I press the tools/macros button and it can take 30 sec or more before the macros dialog release and active or I can try to run windows job list which seems to release the jam too. It also happens when I try to run my macro with shortcut key or customized button. It freezes before the macro even loads and it is very frustrating. If I open the macros editor and run the macro from there (run sub) then there is no delay at all!
Autodesk Inventor 2012 SP1 64-bit, win 7
View 9 Replies
View Related
Dec 2, 2011
I just got a new computer and installed Product Design Suite Ultimate x64. Every time I close Inventor, the window immediately stops responding, then will only go away if I stop the process. If I click "End Task" in the Task Manager, it will start to look for a solution to the problem, then immediately close. No error report displays. All other programs work with no issue. All of the settings are default as installed.
So far I have tried:
-Reinstalling with and without SP1
-Installing the latest Autodesk Certified graphics driver
-Using software graphics
-Running as Admin
-Launching in Vista and 2008 Compatibility Modes
Computer:
Lenovo S20
Xeon W3565 3.2GHz
Windows 7 x64
12GB ECC DDR3 PC3-10600
Quadro 4000
View 2 Replies
View Related
Apr 27, 2012
on a couple of my lager project i have recently had issues with Autodesk Civil 3D 2012 Freezing in Model Space switching between Isometric views. the number of view changes varies each time but seams to freeze during regen of the model.
I have checked the performace tuner and updated my driver, see Attached Log.
We are in the process of changing our CAD Stations over to Windows 7 64 bit, but im not scheduled for a couple more months.
System:
Dell Precision T3400
Windows XP SP3 32 bit
Intel Core2 Quad (Q9550 @ 2.53GHz)
4GB RAM
View 3 Replies
View Related
Jul 31, 2011
I'm using ACA 2012 with Windows 7 Pro x64 in a stand-alone environment. Lately it seems that even running a very simple script file takes multiple minutes where it used to take 1 or 2 seconds. Also, the script no longer scrolls through the 4 or 5 commamd lines I show at the bottom of the monitor; it just lays there like an egg. This behavior is common to all of my scripts. Also, saves seem to be taking a lot longer than before. I've turned virus protection off to no avail.
View 5 Replies
View Related
Nov 27, 2012
I noticed that some multileader move when editing and some do not. This is very frustrating. Usually this seems to happened when annotative scale is on. I tried to avoid this happening by turning off annotative scale and this does not work. Instead I go to another file to find the other multileader text that doesn't move when I edit. I tried to find what causing this shift in the properties menu but can't see the difference between the two.
How to stop the multileader shifting!? Is this a bug?
View 2 Replies
View Related
