AutoCAD Visual LISP / AutoLISP :: Freeze All Xref Layers?
Apr 24, 2013
I have the following code that works, most of the time. Actually, it works or completes itself all the time, but there is no "all encompassing" measures incorporated.
All of the reference entities, believe it or not, are on layer "0". There are also some consistent layers, that you can see in the code below. However, a user may create or even remove any layer in the reference drawing. Therefore in my current drawing, I may have layers that are not frozen in the xref.
Like i said, the following code works, but not all encompassing.
(setq filename "7102-002-950 UC10-03")
(setq FreezePRD (strcat filename "|_PRD"))
(setq FreezeSLD (strcat filename "|_SLD"))
(setq FreezeBORDER (strcat filename "|0_BORDER"))
[Code] ........
I guess what I'm looking for is to freeze all layers that begin with "7102-002-950 UC10-03|".
View 5 Replies
ADVERTISEMENT
Jan 8, 2014
How would I get LAYISO to freeze not turn off layers I do not want to see? I did this in AutoCAD 2006 but recently upgraded to 2014 and do not remember how I did it.
View 6 Replies
View Related
Jun 24, 2013
I am in need of a LISP to freeze layers in viewports on named pages. I found the following functions to return the frozen vport, but it only returns the list of already frozen and it only works if the viewport is active; besides just listing the frozen layers isn't enough. I need to be able to supply the page/tab and a list of layers to freeze.
; by Jürg Menzi 1999(DEFUN GetFrozenLaysInVport (/ LayLst) (FOREACH memb(GetMviewInfo) (IF(= (CAR memb) 1003) (SETQ LayLst (CONS (CDR memb) LayLst)) ) ) (REVERSE LayLst))(DEFUN GetMviewInfo (/ ActVpt CurSet IDX RetVal TmpVal) (SETQIDX TActVpt (CAAR (VPORTS)) ) (IF (OR(= ActVpt 1)(= (GETVAR "TILEMODE") 1) ) (SETQ RetVal nil) (PROGN (SETQ CurSet (SSGET "X" '((0 . "VIEWPORT")))) (WHILE IDX(SETQ TmpVal (ENTGET (SSNAME CurSet 0) '("ACAD")))(IF (= (CDR (ASSOC 69 TmpVal)) ActVpt) (SETQIDX nilRetVal (CDR (ASSOC "ACAD" (CDR (ASSOC -3 TmpVal)))) ) (SETQ CurSet (SSDEL (SSNAME CurSet 0) CurSet))) ) (SETQ CurSet nil) ) ) RetVal)
Is it possible to provide the page/tab name and a list of layers as aguments to a subfunction that could either activate the viewport and freeze a list of layers, or simply freeze the layer list for the named page's/tab's corresponding vport.
Important: most of my pages/tabs contain at least two vports. The largest of the two vports is the only one I wish to change, but if the layer list is frozen on all vports (per page/tab) it will make no difference because the smaller vport only requires that layer 0 is visible.
View 6 Replies
View Related
Oct 1, 2012
How to edit this string so that it would change ONLY XREF layers in a dwg. to color 3 bylayer, and leave all of my additional layers in the current dwg. as is.
^C^Cchprop;(ssget"x");;color;bylayer;;-layer;color;3
View 2 Replies
View Related
Jul 31, 2009
Is it possible to run a lisp which can extract all the xref names, make a layer with that name and then change the xref on the layer? I have got a similar routine from earlier posts but it doesn't work if any xrefs inserted in paper space (works fine on model space). could change this routine allowing to change the layer of xref in paper space too.
(defun dxf (i a) (cdr (assoc i a)))
(defun c:lxr ( )
(setq ss (ssget "x" '((0 . "INSERT"))))
[Code].....
View 8 Replies
View Related
Oct 2, 2012
I am using (trying to anyway) a :VLR-xrefSubcommandReloadItem reactor. My only question is how to get the xref/block name from the 'reactor callback data' Object ID.
I am ultimately trying to pass it to (vla-get-xrefdatabase ....), but I cannot figure out how to turn the second parameter from the reactor callback data into something I can use - for example the second parameter returned may be "65" or some other number.
Civil 3D 2011
Windows 7 x64
View 1 Replies
View Related
Apr 23, 2010
is there any way to freeze a layer without opening the drawing in lisp?
View 7 Replies
View Related
Jan 27, 2012
I am looking for some mleader customization.Basically looking for a mleader that will add an objects name(in my case an xref or block) in the text. Attached is a picture of our current process... nothing special. basically instead of typing in text we use the insert field. In the field dialog that opens we select "object" under Field names, then under object the type button is pressed to select object(in my case and xref or block) then under property the "Name" option is chosen. This will insert the xref name in the multileader. This is not terribly hard but am curious if I can automate and save some steps.
View 1 Replies
View Related
May 10, 2012
I can't seem to find the SYSVAR that controls insert to 0,0,0 instead of pick on screen..
Quad Core 2.3GHz Intel, 64-Bit, Win 7
16GB Ram, 2GB Graphics Card
256GB SSD
View 2 Replies
View Related
Jun 29, 2013
I'm new to the programming thing, and this one has me stumped. We have a problem with people accidently dragging xrefs. The simple solution would be to put all of the xrefs on a locked layer, but I was vetoed on this suggestion. I've been trying to figure out if I can write a lisp that will do one of the following: Give an alert if an xref is moved.Not allow an xref to be moved.Tell the user when they open a drawing that an xref is not at 0,0,0 insertion point.
View 1 Replies
View Related
Jun 18, 2013
This lsp was passed on to me from a colleague but he doesn't know where he got it. It does a useful procedure of placing each xref, residing in the drawing, to a unique layer. The layer name is derived from the xref name. I would like to edit this to take only part of the xref name. This system I work with requires all files to have the job number as a prefix eg LE1399901_Contours.dwg, so the xref name would be LE1299901_Contours by default. I want to remove the first 10 characters to be left with "X_Xref-Contours" layer name using this code.
(defun dxf (i a) (cdr (assoc i a)))
(defun c:lxr ( / ss cnt xrs en ed bn xp xbn )
(setq ss (ssget "x" '((0 . "INSERT"))))
(setq cnt 0)
[code]........
View 5 Replies
View Related
Nov 25, 2012
what i would like to do is rename (externally) and repath about 4-8 xrefs in a drawing set of about 100 drawings.
you may ask why? it is because we are trying to establish a template set of drawings for a civil design office. and when we start a new project, copy over the drawings to the relevant project folder, change the project number, run the script across the drawings and go from there. I've also tried this using the reference manager, but it doesn't work when you change the name of the xrefs (loses association)
basically i know if i could use a lisp i would run it using autoscript or something equal. All i need is to figure out the code to change the project number in the xref
for example
current - "xxxx-PN009999-aaa-00-survey.dwg"
change to - "xxxx-PN001234-aaa-00-survey.dwg"
from my research so far, the easiest way is to make a lisp with the following
-rename
b
xxxx-PN009999-aaa-00-survey
xxxx-PN001234-aaa-00-survey
-xref
p
xxxx-PN001234-aaa-00-survey
c:acadcivildummyfolderxref
If this is the correct code, do i have to rename the CAD xref files in explorer first?
View 1 Replies
View Related
Aug 14, 2009
I'm looking for a lisp that will change all the layer colors of selected xref by clicking the xref and select color from the color table palette. I have a routine that would change the layer color of a selected entity other than xref.
;;Changes selected object layer to a true color
;;of chose from a dialog
box
(defun c:cvc (/ ent ent_data rgb str objlay)
(setq ent
(entsel)
)
[code]....
View 5 Replies
View Related
Oct 19, 2011
Is there way get field object att in xref ?
View 3 Replies
View Related
Feb 11, 2013
is it possible to bind an an xref via ObjectDBX without opening the drawing?
View 1 Replies
View Related
Nov 7, 2013
Any routine or way to convert a nested xref to a regular xref?
View 4 Replies
View Related
Aug 15, 2013
I think there is a function that will cause the selected object that is in the XRef to highlight.
View 1 Replies
View Related
Oct 5, 2012
How to edit the string below so that it will ignore all layer names starting with "E-". I want to change all XREF layers in the current dwg. to 161 but ignore all XREFED layer names that start with E- such as E-lighting, E-power etc.
View 4 Replies
View Related
Apr 30, 2013
I need a routine that will duplicate the current sheet's Layout tab and content to the next tab, set it current, delete the titleblock (by name) on the new tab and reference in a differently named titleblock, 1:1, 0,0 onto the new Layout tab. I'll be running this in a batch script.
View 9 Replies
View Related
Aug 22, 2012
I have a Lisp that I have been working on with some folks in the office, and i feel like i am close, but i am not getting the cigar. The idea would be to have the lisp allow the user to select a nested x-ref entity, and change the color and linetype of the selected layer, similar to the old "LAP" command (I know it is a dinosaur, but I still miss it). I seem to be doing swimmingly, code I have quasi-plagiarized. It seems to crap out where i try to pass the selected linetype back to the layer. I get the nastygram "Command: ; error: no function definition: GETLINETYPE" right after selecting the linetype from the dialog.
Code below...
x(defun c:CX (/ Sel EntList DataList cnt Num ClrNum EntData)
(if (setq Sel (nentsel "
Select object to change layers color and linetype: "))
(progn
[Code]...
HP Elitebook Workstation
Windows 7
View 6 Replies
View Related
Feb 13, 2013
I am trying to write a LISP that does the following:
-Open drawing
-Saveas as NEW drawing based on certain criteria from DCL menu
-Deletes old drawing
-*THEN, if drawing contain attached IMAGE FILE (.tiff in my case)
-Rename image file and repath image file based on the new file name
I have gotten it to do all of this, except I can not figure out how to change the "reference name" of the attached image file (.tiff)
Is this read-only data? I can manualy change it under xref manager, so there should be a way to do it via code...
The closest I have gotten:
;;after renaming and repath image file...
(SETQ NAME2 (substr (getvar "dwgname") 1 (- (strlen (getvar "dwgname")) 4)))
(setq item (vlax-ename->vla-object (entlast)));convert to vl object
(setq check (vlax-property-available-p item "Name" T));check if the entity can be updated
;if it can
(if check
;change value to match
(vlax-put-property item 'Name NAME2))
'Name seems to be valid w/ xref'd blocks but not xref'd/attached image files..
View 1 Replies
View Related
May 28, 2013
I have used Autocad since 1991, and my current job required me to use Microstation. One feature I liked from Microstaiton is the ability to select and open an external DGN reference, and then match the view of the parent DGN. In AutoCAD, you can also select and open an xref, but the DWG opens to the previous saved view, and not to the desired view that matches the layout.
My thought was to experienting with lisp or scipt and export the "Viewctr", "Viewtwist" and "Viewsize" variables to a text file, then importing the text file and using the "Viewtwist" as my "SNAPANG" value, then "Viewctr" as my "ZOOM, CENTER" value, and finally the "Viewsize" as the "Enter magnification or height:" value.
But, alas, have no time, and not quite the knowledge to duplicate MicroStation's open-xref-and-zoom-to-view feature.
View 6 Replies
View Related
Jun 14, 2013
I am looking for an alternative to in place XRef Edit.
The third party software I am stuck with has disabled in place editing an Xref.
The specific application I need is to allow the user to move an intelligent room tag that is XReffed into discipline specific models. Disciplines are Architectural, Mechanical, Electrical..Etc. Each discipline has their own room tag and needs to move their own tag to a location that can be clearly seen on their finished plot. Xref edit in place is the perfect tool for this..But since the third party has disabled the command, I need an alternative method.
View 9 Replies
View Related
Jan 25, 2013
I know that for layers ON/OFF in current open dwg file, I should use:
[I just want to On/Off for my "STAMP" layer]
(COMMAND "LAYER" "ON" "STAMP" "")
(COMMAND "LAYER" "OFF" "STAMP" "")
but I have more than 150 dwg file and I should open all of dwgs one by one and setting ON/OFF for STAMP layer for every drawing and it takes so much time!
I just want to select files and LISP program set the STAMP layer to ON or OFF value.
View 5 Replies
View Related
May 31, 2012
I am running a simple script to color some layers in XRefs. I need to colour all layers in XRef files that don't have part of their name containing the characters NWP and I can do this with the line
-layer c 32 ~*|*NWP*
but then all the layers in the sheet file (not in Xrefs) also turn to 32 which I do not want. Is there some way to include an "except" statement in scripts.
View 3 Replies
View Related
Oct 23, 2013
I'm trying to set up an easy way to import layers from a certain dwt. file with a shortcut.
Now I found this code, which kind of works, but doesn't do the whole trick. It works with a Popup where I have to insert the dwt. file. It's also annoying that it opens this file than and I have to close it manually.
I would like to have this without any import options and automatically takes this one file always for the layers.
My file would be located here:
"I:AutoCAD BlöckeTemplate\__Bürostandard"
(defun c:IL (/ oAcad oCurDoc strFile oOpenDoc oOpenDocLayers lstObj oLayer array)
(setq oAcad (vlax-get-acad-object))
(setq oCurDoc (vla-get-ActiveDocument oAcad))
(setq strFile (getfiled "choose file:" (getvar "DWGPREFIX") "dwt" 0))
[code]........
View 4 Replies
View Related
Jan 21, 2013
We have our pipe networks living in a master file that is XREF'd to our sheet files. Now, the pipe and structure objects are all the layer C-PNET. The style for the pipes is comprised of the layers C-STRM-PIPE (for pipe walls) and C-STRM-PIPE-PATT (for the center line that is the width of the pipe). When I go into the XREF I cannot freeze OR change the color of the layers comprising the pipe style even though they are all set to ByLayer in the style dialog. The only way to freeze the network is to freeze the layer the pipe network is on C-PNET. However, this presents other problems with our file setup and we dont want to universally freeze C-PNET.
why we cant freeze the portions of the pipe network that are defined in the style as being on C-STRM-PIPE, and C-STRM-PIPE-PATT? If so, how do we remedy this?
View 3 Replies
View Related
Aug 23, 2011
What the require setting to enable me to lock of several layer continuously when i click the "LAYER OFF" button at the toolbar? I wish to set to be like whenever i use the "LAYER OFF" command, i can direct just continue to click several layers for it to be turn off.
View 9 Replies
View Related
Apr 24, 2013
If I have BLOCKA on a layer (or specifically layer 0), how do you copy blockA onto every layers? I'm sure there are 5 ways of doing this.
View 9 Replies
View Related
Dec 11, 2013
I want to make a list of layers due to their index (order) in the "layers combo box" in the AutoCAD. I prepared this:
(defun c:ListLayers ( / a b)(setq a(list(cdr(assoc 2(tblnext "layer" T)))))(while(setq b(tblnext "layer")) (setq a(append a(list(cdr(assoc 2 b))))));while);end
But, It's not match with the order of layers.
View 9 Replies
View Related
Feb 13, 2013
I have an old routine that freezes layers that are off. I would like it to also turn off layers that are frozen. It took a while but I think I figured out how the old routine works. I was having trouble determining how the routine would know if a layer was off or not. I found if the color was a negative number that meant the layer was off (cond ((< (dxf 62 l) 0) (command "f" (dxf 2 l)))). How do I tell if the layer is frozen?
I was also wondering what the character was after the DXF code ie. (dxf 62 l). Is is a lowercase L or an upper case i and what function does it have?
Below is the old routine that freezes layers that are off.
(defun c:fo (/ l dxf code list)
(defun dxf (code list)
(cdr (assoc code list))
);defun
(setq l (tblnext "layer" T))
[code].........
View 2 Replies
View Related
