AutoCAD Visual LISP / AutoLISP :: Allow User To Move Room Tag That Is XRef Into Discipline Specific Models
Jun 14, 2013
I am looking for an alternative to in place XRef Edit.
The third party software I am stuck with has disabled in place editing an Xref.
The specific application I need is to allow the user to move an intelligent room tag that is XReffed into discipline specific models. Disciplines are Architectural, Mechanical, Electrical..Etc. Each discipline has their own room tag and needs to move their own tag to a location that can be clearly seen on their finished plot. Xref edit in place is the perfect tool for this..But since the third party has disabled the command, I need an alternative method.
View 9 Replies
ADVERTISEMENT
Dec 7, 2011
I've had a simple lisp I've been using for years that suddenly disappeared. It required that you identify a block name, tag name, and the value that you want the tag to be. All of this is performed via command line, so it is scriptable. Since I lost it, I've been experimenting with -attedit. This command comes frustratingly close to what I'm looking for, except it only appends an existing tag, or replaces a specific string within the tag; I can't get it to replace the entire tag, regardless of its value.
1> Any lisp routine that does what I describe?
or
2> How to make -attedit replace a tag value without regard to what the value currently is (like a * wildcard)?
View 9 Replies
View Related
Jul 31, 2009
Is it possible to run a lisp which can extract all the xref names, make a layer with that name and then change the xref on the layer? I have got a similar routine from earlier posts but it doesn't work if any xrefs inserted in paper space (works fine on model space). could change this routine allowing to change the layer of xref in paper space too.
(defun dxf (i a) (cdr (assoc i a)))
(defun c:lxr ( )
(setq ss (ssget "x" '((0 . "INSERT"))))
[Code].....
View 8 Replies
View Related
Oct 2, 2012
I am using (trying to anyway) a :VLR-xrefSubcommandReloadItem reactor. My only question is how to get the xref/block name from the 'reactor callback data' Object ID.
I am ultimately trying to pass it to (vla-get-xrefdatabase ....), but I cannot figure out how to turn the second parameter from the reactor callback data into something I can use - for example the second parameter returned may be "65" or some other number.
Civil 3D 2011
Windows 7 x64
View 1 Replies
View Related
Jan 13, 2013
Lisp routine that divided up a normal square / rectangle room and insert a block at each given point.
At present if the room was to have four lights width ways and three lights length ways we would divide the width by eight to give us 1/2 1 1 1/2 so the lights would be placed on every second point after the divde command (dividing the room by twice the amound of lights needed).
View 9 Replies
View Related
Dec 19, 2012
make a LISP that will work with my room dimensioning? I'd like to be able to specify the width and depth of the room using a command similar to the "dist" command, and then click a point to place a text based on the distances gathered. I'd also like the text to be formated into architectural units and displayed like this: 12'-0" X 13'-5". Also, if possible, round the result to the nearest inch (to avoid 1/2" and 1/4" dimensions).
View 9 Replies
View Related
Jul 25, 2013
I am using Autocad 2012. I need to make some 2D execution drawings from a 3D model. I tried to use the following commands: flatshot, flatten §ion plane. All of them are having bad results. From all this 3 commands the closer to my needs is the flatshot. But I am working with many layers which have different colors, so when I will generate the 2D views I need to see the same color as the layers have (each color is for a particular medium).
I am using this command without showing the obscured lines. When I am generatic the isometric views with the flatshot I am seeing strange objects (UFO), is far away from the original model, you can see in the attachment.
My questions are: It is possible to generate somehow 2D views (front views&isometric views) seeing the color which every element has, and it is possible to correct somehow those ugly isometric views ( the guys from autocad should do something with this, because when I am generatic a isometric view the 2d drawing that I recived is completely different from the 3D model !).
I want to make the drawings using the 2D views, because the 3D Models are very big (50-60MB) and it is very hard to work with them!
View 7 Replies
View Related
Oct 24, 2013
LSP file i downlaoded from web.it is to use for Area with (m2) and room name. by click polyline.
i want to modify it to use without adding Room Name, just insert area to the drawing.
(defun drtxt (/ rn tx ls vl lt ht lb hb nr pt)
(setq tx (strcat "Area: "
(rtos (/ (getvar "area") 1000000) 2 2)
" m2"
)
rn (getstring "
Room Name: ")
[code]....
View 5 Replies
View Related
Sep 5, 2012
I just need the userinput to be incorporated in the insert command but don't know how to segregate the block name from the block path..
;;;PROMPT USER FOR BLOCK NAME HERE
(setq userinBLKNAME (getstring "
Please type in the block name shown in the allrevblocks - ex: IFCC4:"))
;;;INSERT BLOCK BASED ON BLOCK NAME PROVIDED HERE
(command "-insert" "B:\CAD\REVBLOCKS\IFC\"USERINBLKNAME PAUSE "1" "" "")
View 3 Replies
View Related
May 7, 2012
I've been trying to append a user input by adding this text "ABC" to the front of it. How can I do that?
(setq NUMX (getstring "
Please specify NUMBER:")); INPUT NUMBER 123 HERE
(SETQ NUMXX (append '(ABC) NUMX))
So that NUMXX now equals ABC123.
View 2 Replies
View Related
Dec 17, 2012
Any way to permanently disable polar. Like if autocad were to automatically switch to ortho every 10 mins or something?
View 5 Replies
View Related
Apr 25, 2012
I have a little LISP I have been working on that creates a text object as a "label" for 2D ductwork our company does. It makes a field for the mlinescale as the duct width, combines with user input for duct depth, and prompts user for location to place the text. The routine is functional...however, I would like to tweak two things that I cannot figure out.
First, I would like the command to continue until the user escapes, similar to the "multiple" command in AutoCAD. I have tried adding a while loop to the majority of the routine..which works until the user escapes...then my error handler undoes everything.
Second, when asking for user input, is it possible to ask for user input without a default the first time, but thereafter remember the input as a default?
Below is the code in question...not including error handler, etc. :
(if (= ducttemp nil)(setq ducttemp 12))
(initget 6)
(setq ductdepth (getint (strcat "
Enter duct depth in inches <" (itoa ducttemp) ">, or Esc to end: ")))
(if (= ductdepth nil) (setq ductdepth ducttemp) (setq ducttemp ductdepth))
[Code] .........
View 4 Replies
View Related
Dec 14, 2013
I want to write a very simple AutoLISP program to scale selected objects by a factor of (1/25.4). How to I get the program to pause and allow the user to select the base point? I know that "~" will bring up a selection window, but what is the character that will allow point selection (in this context)? While we're at it, what is the operator that would trigger a pause and allow user command line input?
View 7 Replies
View Related
May 16, 2012
I'm trying to combine two user inputs and a constant with setq without spaces so I can use it in an AutoCAD command.
I haven't seen a string command that does this. It always has spaces in between the fetched valvues.
View 9 Replies
View Related
Jan 27, 2012
I am looking for some mleader customization.Basically looking for a mleader that will add an objects name(in my case an xref or block) in the text. Attached is a picture of our current process... nothing special. basically instead of typing in text we use the insert field. In the field dialog that opens we select "object" under Field names, then under object the type button is pressed to select object(in my case and xref or block) then under property the "Name" option is chosen. This will insert the xref name in the multileader. This is not terribly hard but am curious if I can automate and save some steps.
View 1 Replies
View Related
May 10, 2012
I can't seem to find the SYSVAR that controls insert to 0,0,0 instead of pick on screen..
Quad Core 2.3GHz Intel, 64-Bit, Win 7
16GB Ram, 2GB Graphics Card
256GB SSD
View 2 Replies
View Related
Feb 13, 2013
I need to delete a specific block from current opened drawing by LISP command.
for example removing XREF attached is very easy:
(COMMAND "-XREF" "D" "FRAME")
I can remove "FRAME" XREF from drawing. Now, I want to delete a/all block with "TB12" name with same action!
(command "BlockDelete" "TB12")
so, how can I delete a/all block with specific name in current drawing?
View 9 Replies
View Related
Aug 30, 2011
How would one modify
(= (cdr (assoc 0 data)) "ATTRIB")
in order to filter for a certain attribute tag named MYTAG
I am working with a custom LISP routine which reports out to a CSV file, an attribute extraction file - but I need my routine to ONLY evaluate blocks which have the MYTAG attribute tag. Then, if it passes that first check, it evaluates another list of Tags within those blocks - a list of tags which I have specified elsewhere in the code.
I am trying to modify my existing code as little as possible, and I think that if I do it at the line (which I've pasted above) - that will "pre-qualify" my selection set....
ATTACHED LISP IS THE FILE I AM WORKING WITH --- THE ACTUAL LINE I WANT TO MODIFY IS AT:
"(while (eq ENSUB "ATTRIB")"
View 3 Replies
View Related
Jul 16, 2013
I have a routine that sets user defined osnaps based on a text file.Here is what is an example of user stored osnap settings -
(setq User_Osnaps (list (list "Alan" "endp,midp,int") (list "John" "cen,ins")))
Here is routine I use to set user osnaps -
(defun CU ()
(vl-cmdf "-OSNAP" (cdr (assoc (getvar "LOGINNAME") User_Osnaps)))
(princ)
)
This works great so long as the user is not in the middle of another lisp routine.How can I change this to a transparent command that will work to set osnaps while running another lisp routine?I would like to store it in a toolbar button.
View 9 Replies
View Related
Sep 13, 2011
I need a command that will allow the user to select a layout tab. I thought the following would work, but it just ends the LISP program:
(command "layout" "s" pause)
View 9 Replies
View Related
Jul 30, 2012
Is there a way to have an alert box pop up at a certain point in the code which gives the user a chance to cancel the LISP program and not proceed any further?
View 9 Replies
View Related
Oct 25, 2011
I am looking for a way where a user is prompted to select a row of blocks and then that row is completely mirrored about the middle of the selection set - such that if the blocks are originally inserted, from left to right "A" "B" C" then after mirroring, we want them t occupy (roughly) the same space in the drawing area as "C" "B" "A".
Then, immediately after mirroring that selection set in place, each individual block that makes up the selection set is mirrored about its insertion point along the x axis..... basically i need to mirror a selection set of a row of blocks so I change their order of occurrence and then mirror each individual block back again to the way it is meant to look.
Is this possible?
View 9 Replies
View Related
Oct 1, 2012
How to edit this string so that it would change ONLY XREF layers in a dwg. to color 3 bylayer, and leave all of my additional layers in the current dwg. as is.
^C^Cchprop;(ssget"x");;color;bylayer;;-layer;color;3
View 2 Replies
View Related
Jun 29, 2013
I'm new to the programming thing, and this one has me stumped. We have a problem with people accidently dragging xrefs. The simple solution would be to put all of the xrefs on a locked layer, but I was vetoed on this suggestion. I've been trying to figure out if I can write a lisp that will do one of the following: Give an alert if an xref is moved.Not allow an xref to be moved.Tell the user when they open a drawing that an xref is not at 0,0,0 insertion point.
View 1 Replies
View Related
Jun 18, 2013
This lsp was passed on to me from a colleague but he doesn't know where he got it. It does a useful procedure of placing each xref, residing in the drawing, to a unique layer. The layer name is derived from the xref name. I would like to edit this to take only part of the xref name. This system I work with requires all files to have the job number as a prefix eg LE1399901_Contours.dwg, so the xref name would be LE1299901_Contours by default. I want to remove the first 10 characters to be left with "X_Xref-Contours" layer name using this code.
(defun dxf (i a) (cdr (assoc i a)))
(defun c:lxr ( / ss cnt xrs en ed bn xp xbn )
(setq ss (ssget "x" '((0 . "INSERT"))))
(setq cnt 0)
[code]........
View 5 Replies
View Related
Nov 25, 2012
what i would like to do is rename (externally) and repath about 4-8 xrefs in a drawing set of about 100 drawings.
you may ask why? it is because we are trying to establish a template set of drawings for a civil design office. and when we start a new project, copy over the drawings to the relevant project folder, change the project number, run the script across the drawings and go from there. I've also tried this using the reference manager, but it doesn't work when you change the name of the xrefs (loses association)
basically i know if i could use a lisp i would run it using autoscript or something equal. All i need is to figure out the code to change the project number in the xref
for example
current - "xxxx-PN009999-aaa-00-survey.dwg"
change to - "xxxx-PN001234-aaa-00-survey.dwg"
from my research so far, the easiest way is to make a lisp with the following
-rename
b
xxxx-PN009999-aaa-00-survey
xxxx-PN001234-aaa-00-survey
-xref
p
xxxx-PN001234-aaa-00-survey
c:acadcivildummyfolderxref
If this is the correct code, do i have to rename the CAD xref files in explorer first?
View 1 Replies
View Related
Apr 24, 2013
I have the following code that works, most of the time. Actually, it works or completes itself all the time, but there is no "all encompassing" measures incorporated.
All of the reference entities, believe it or not, are on layer "0". There are also some consistent layers, that you can see in the code below. However, a user may create or even remove any layer in the reference drawing. Therefore in my current drawing, I may have layers that are not frozen in the xref.
Like i said, the following code works, but not all encompassing.
(setq filename "7102-002-950 UC10-03")
(setq FreezePRD (strcat filename "|_PRD"))
(setq FreezeSLD (strcat filename "|_SLD"))
(setq FreezeBORDER (strcat filename "|0_BORDER"))
[Code] ........
I guess what I'm looking for is to freeze all layers that begin with "7102-002-950 UC10-03|".
View 5 Replies
View Related
Sep 20, 2013
I have some code that starts a new drawing with a specific template from a lisp routine
(defun ghd:load_newdwg (template / ae-acad-object newdwg)
(setq ae-acad-object (vlax-get-acad-object))
(setq newdwg (vla-add (vla-get-documents ae-acad-object) template))
(vla-put-activedocument ae-acad-object newdwg)
)
The template location and file is stored in variable clienttemplate (and is not the standard template path set under options). All works okay except if I close the new drawing, when I return to the previous drawing that was current when the new drawing was created (i.e. the drawing that the routine was run from). I get the following error:
Command: ; error: Exception occurred: 0xC0000005 (Access Violation)
; error: Unknown exception occurred
; warning: unwind skipped on unknown exception
I assume this has something to do with the original routine not closing/finishing before switching to the new drawing. This is the last line of the routine:
(cond ((= startnewdwg 1) (ghd:load_newdwg clienttemplate)))
View 3 Replies
View Related
Oct 3, 2013
I need a lisp which is i can draw a line or pline with circle in every 30 meters ( circle diameter and total line or pline length will be optional )
View 6 Replies
View Related
Apr 9, 2013
I have a lisp which I use to erase all points in a specific layer.
(defun cPL ()
(setq ss1 (ssget "x" (list '(0 . "point")'(8 . "Points"))))
(command ".erase" ss1 "")
(princ)
)
It is working only if I have the points in the DWG. If there are no points, I receive "Unknow command DPL". Is there anything I can do in order to avoid this error?
View 5 Replies
View Related
Dec 4, 2013
I have situation where a block is inserted in paperspace before a leader is to be added into modelspace. I need it to work like the "CHSPACE" command - it pauses and asks the user to activate a viewport before continuing.
How that pause until viewport is active is done?
View 7 Replies
View Related
