I'm trying to combine two user inputs and a constant with setq without spaces so I can use it in an AutoCAD command.
I haven't seen a string command that does this. It always has spaces in between the fetched valvues.
I have 40 pages in one set of drawings and would like to rev-up the drawings. i will put same texts in same locations in the title blocks.
View 9 Replies View RelatedI just need the userinput to be incorporated in the insert command but don't know how to segregate the block name from the block path..
;;;PROMPT USER FOR BLOCK NAME HERE
(setq userinBLKNAME (getstring "
Please type in the block name shown in the allrevblocks - ex: IFCC4:"))
;;;INSERT BLOCK BASED ON BLOCK NAME PROVIDED HERE
(command "-insert" "B:\CAD\REVBLOCKS\IFC\"USERINBLKNAME PAUSE "1" "" "")
I've been trying to append a user input by adding this text "ABC" to the front of it. How can I do that?
(setq NUMX (getstring "
Please specify NUMBER:")); INPUT NUMBER 123 HERE
(SETQ NUMXX (append '(ABC) NUMX))
So that NUMXX now equals ABC123.
Any way to permanently disable polar. Like if autocad were to automatically switch to ortho every 10 mins or something?
View 5 Replies View RelatedI have a little LISP I have been working on that creates a text object as a "label" for 2D ductwork our company does. It makes a field for the mlinescale as the duct width, combines with user input for duct depth, and prompts user for location to place the text. The routine is functional...however, I would like to tweak two things that I cannot figure out.
First, I would like the command to continue until the user escapes, similar to the "multiple" command in AutoCAD. I have tried adding a while loop to the majority of the routine..which works until the user escapes...then my error handler undoes everything.
Second, when asking for user input, is it possible to ask for user input without a default the first time, but thereafter remember the input as a default?
Below is the code in question...not including error handler, etc. :
(if (= ducttemp nil)(setq ducttemp 12))
(initget 6)
(setq ductdepth (getint (strcat "
Enter duct depth in inches <" (itoa ducttemp) ">, or Esc to end: ")))
(if (= ductdepth nil) (setq ductdepth ducttemp) (setq ducttemp ductdepth))
[Code] .........
I want to write a very simple AutoLISP program to scale selected objects by a factor of (1/25.4). How to I get the program to pause and allow the user to select the base point? I know that "~" will bring up a selection window, but what is the character that will allow point selection (in this context)? While we're at it, what is the operator that would trigger a pause and allow user command line input?
View 7 Replies View RelatedI have a routine that sets user defined osnaps based on a text file.Here is what is an example of user stored osnap settings -
(setq User_Osnaps (list (list "Alan" "endp,midp,int") (list "John" "cen,ins")))
Here is routine I use to set user osnaps -
(defun CU ()
(vl-cmdf "-OSNAP" (cdr (assoc (getvar "LOGINNAME") User_Osnaps)))
(princ)
)
This works great so long as the user is not in the middle of another lisp routine.How can I change this to a transparent command that will work to set osnaps while running another lisp routine?I would like to store it in a toolbar button.
I need a command that will allow the user to select a layout tab. I thought the following would work, but it just ends the LISP program:
(command "layout" "s" pause)
Is there a way to have an alert box pop up at a certain point in the code which gives the user a chance to cancel the LISP program and not proceed any further?
View 9 Replies View RelatedI am looking for a way where a user is prompted to select a row of blocks and then that row is completely mirrored about the middle of the selection set - such that if the blocks are originally inserted, from left to right "A" "B" C" then after mirroring, we want them t occupy (roughly) the same space in the drawing area as "C" "B" "A".
Then, immediately after mirroring that selection set in place, each individual block that makes up the selection set is mirrored about its insertion point along the x axis..... basically i need to mirror a selection set of a row of blocks so I change their order of occurrence and then mirror each individual block back again to the way it is meant to look.
Is this possible?
I have situation where a block is inserted in paperspace before a leader is to be added into modelspace. I need it to work like the "CHSPACE" command - it pauses and asks the user to activate a viewport before continuing.
How that pause until viewport is active is done?
Is there a way to determine the type of ACAD object that the user selected? I need to retrieve the value from either a dimension or text. The info could be in either format so the lisp routine needs to determine what was selected so the correct vla-get command is used.
Once I determine what the object is I can use an if statement to retrieve the value.
;user selects the object
(setq dimobj (vlax-ename->vla-object(car(entsel))))
;If ACAD object is a dimension do this.
(setq dimvalue (vla-get-textoverride dimobj))
;If ACAD object is text do this.
(setq dimvalue (vla-get-textstring dimobj))
I'm putting together a simple lisp routine to issue bound, purged drawings.
I have code that will do the binding & purging but need handling the saving.
This is my approach :
(1) ask the user to save the drawing using this line (command "_saveas" "" "~")
(2) run a subroutine that binds xrefs etc (this works ok)
(3) run the QSAVE command
Trouble is, if the user cancels or hits escape during the SAVEAS command the subroutine & QSAVE will still run, overwriting the current drawing. How do I handle this scenario? Or should my appoach be different?
We are using .cuix file which gives access to tools in custom .arx file in AutoCAD 2012/2013. We load the menu using the .bundle mechanism and the plug-in - using button from the menu. If the user is Administrator (or executes AutoCAD as Administrator) the menu, toolbars and ribbons are loaded correctly and the user can load and unload the application (lisp function in .mnl file is used for that), but if the user is not an administrator either the menu, toolbars and ribbons are not correctly loaded or they are loaded, but the user can not load the application.
We have found that a probable cause for this behaviour is that AutoCAD tries to create/renew the .mnr file when first loading a .cuix file and since the user has no administrator rights this can't be done in the "C:Program FilesAutodeskApplicationPlugins" folder where the bundle is and AutoCAD creates the .mnr file in its own support folder ("C:Users<User>AppDataRoamingAutodeskAutoCAD 2012R18.2...Support") together with a copy of the .cuix file and changes the path for loading the .cuix file to this location. Since the .mnl file containing the function for loading/unloading is not copied with the .cuix file the application can not be loaded.
The user has to delete the created files under the support path of AutoCAD, unload the .cuix file and then reload it from the correct location to resolve the problem. Restarting AutoCAD leads to the same problem.
Is there a way to prevent this behavior other then running AutoCAD as administrator (that is not always an option)?
I am trying to locate a .wdp file with minimal user input. this is what I have so far
;All file saved in this folder
(setq filedir "I://PROJECTS//")
;User will put the following in, but there might be a small description after 915-01. That is why I have a wildcard
(setq filename (strcat "915-01*"))
; string together everything
(setq nextlevel (strcat filedir "JOB " filename "*" "//ACAD"))
;; the final path should look something like this:
I://Projects// JOB 915-01(something here... could be anything or nothing)//ACAD//915-01(something else could be here as well).wdp
;set file extension
(setq fileext ".wdp")
; search files
(setq wdp_file (vl-directory-files nextlevel (strcat filename "*" fileext)))
I am confused on where and when I can use wildcards for searching directories.
Main question: I need the user to be able to type a command. Then use it or cancel it. Then i need them to type another lisp command. In the second command i need to know (have the string of) the previous command they typed in. How do i get that string?
What I have tried.
I have looked at "LASTPROMPT" though not extensively, and i believe it would just return "ineedhelp" if i tried that.
I have looked at "CMDNAMES" but that gives the command you're currently in.
And I have found one page on this forum titled: Command Line History Macro, but there was no answer on that post.
I could create a global variable for that string, but then I would have to put the set code in every function I create. Nope, will not.
Backstory:
There's a person that is going to make how-to videos on how to use some of my lisp routines.
Anyhow, I need the user to be able to type in "ineedhelp" and the lisp that runs must get the last command's string go to the shared drive and pull up the video file for that command.
I have made a lisp that opened a word file before, and if i could get the string of the previous command, i'm fairly certain that I can get the videos to work.
There will be approximately 60 lisp routine video's.
I have a list function that asks for the user to pick points when it is run. It looks something like this (foo arg1 arg2) When invoked it asks the user to pick points and press enter when done It.
Instead of getting the points from the user i want to pass it a list of pre-defined points. The code cannot be changed so I must use it as is.Is this possible, if so how can it be done?
I have various Button macros with the user input select in them, but in 2014 they dont seem to be working anymore.
they worked in 2013.
It just says invalid selection.
example
^C^CSelect;change;p;lt;phantom;;
I'm trying to change a routine i just wrote that draws 3d pipes. I wanted to make it so that when a user selects the beginning point and ending point of the pipe, the LISP changes the ucs to that vector, draws the circle at the beginning point and extrudes it to the second point.
It actually works great except when the ucs changes, so do my user points because of teh origin change. Is there a better way I might get this to do what I wnat it to?
(setq ip (getpoint "
Pick First Point:"))(setq ep (getpoint "
Pick Second Point:"))(command ".ucs" "za" ip ep)(setvar "osmode" 0)(command ".circle" ip "d" od)(command ".extrude" (entlast) "" (distance ip ep))(command ".ucs" "w")(setvar "osmode" oldsnap))
I am looking for an alternative to in place XRef Edit.
The third party software I am stuck with has disabled in place editing an Xref.
The specific application I need is to allow the user to move an intelligent room tag that is XReffed into discipline specific models. Disciplines are Architectural, Mechanical, Electrical..Etc. Each discipline has their own room tag and needs to move their own tag to a location that can be clearly seen on their finished plot. Xref edit in place is the perfect tool for this..But since the third party has disabled the command, I need an alternative method.
Tool to combine multiple pieces of Mtext into a single Mtext with paragraphs?
View 9 Replies View RelatedI have more DWG files, all dwg file convert same size (A3 SIZE) PDF file and combine one PDF file. Find script program or lisp program.
I have script program for convert dwg file to pdf file but i don't know all pdf compile one pdf file.
Is there a lisp that will allow me to do a continuous dimension, but will alternate the dimension position from low, high, low and high? If there is no lisp already created, how to create one?
See Continuous dimension attachment for example.
I work at a glass and glazing company and this is how we dimension mullion width and DLO. See typical window dimensioning attachment for window elevation with dimensions.
I have a list ("temp.dwg" "temp2.dwg") and would like to add the string "insert text here" into each item in the list resulting in ("insert text heretemp.dwg" "insert textheretemp2.dwg"). how would i go about doing that using LISP?
View 2 Replies View RelatedIs there a way to programatically set a visual style before a drawing actually opens?
We have some huge models and people seem to forget to change their visual styles back to 2D wireframe before saving and exiting drawings. Some models will crash on some workstations when trying to open in a rendered mode.
I found a lisp with a function that looked to set viewport visual styles. But it does not seem to be supported anymore. --> (vla-put-VisualStyle vport 1)
I'm trying to write a lisp routine that, when I invoke the mleader command, osmode is set to "nearest" & orthomode is set off. I then would like the original settings to be returned.
attached is what I have written so far:-
Lisp that switches back on Selection Preview i.e. thickens and highlights lines when you hover over them?I don't know why, but they are always unticking the boxes.
View 4 Replies View RelatedIs it possible to execute a certain command based on multiple selections withinin a dcl? for example: two radio colums, one with selections A and B, and a second with selections 1 and 2. is it possible to program commands based on user selections from each column? ex: if A and 1- do a command. A 2- do a different command, etc...
I tried :
(action_tile "key1" "(setq A t")
(action_tile "key2" "(setq B t")
(action_tile "key3" "(setq 1 t)(done_dialog)")
(action_tile "key4" "(setq 2 t)(done_dialog)")
(if
(and (a) (1)
)
(command ...
but was unsuccessful. no matter which combination was selected, the command under all combinations would run.
I am trying to find a lisp that would get an attribute value (tag name = NBR_5) . I'm trying to run a simple routine that would let the user place the value from the titleblock attribute as text on a drawing. I see a ton of articles regarding getting attributes but I am not well versed in programming.
View 9 Replies View RelatedI have a routine that work fine, but I receive a nil at the end of command. How to fix that?
View 7 Replies View Related