AutoCAD LT :: 2012 Copy And Paste Not Working?
Aug 10, 2012I have recently upgraded to AutoCAD LT 2012. The copy/paste function and the group/ungroup function are not working. I have run service pack 2 with no improvement.
View 9 RepliesI have recently upgraded to AutoCAD LT 2012. The copy/paste function and the group/ungroup function are not working. I have run service pack 2 with no improvement.
View 9 RepliesMy AutoCAD often will not copy & paste. It prompts for insertion point and when picked nothing appears. This happens on many different drawings. Windows 7.
View 2 Replies View RelatedWhen I copy and paste on Autocad 2012, it goes very slow.
I installed the service pack, I tried removing the layer filters and a few other fixes that are out there. The machine is powerful enough to handle the application.
I tried reinstalling the application and that didn't do anything. The DWG file that's on the network share is being used by other people without any issue, I'm the only one having this problem.
In the past (using Autocad 2007), I could copy my AutoCAD drawing and paste it into a sketch in Solidworks. Since my company updated to AutoCAD 2013, I can't seem to paste anything into the Solidworks sketch.
View 1 Replies View Related- Dell XPS 8300 running Windows 7 SP1 64-bit with 12 GB of RAM
- AMD Radeon HD 6800 Series with updated drivers installed
- AutoCAD 2012 64-bit SP1
- ACAD Hardware Acceleration is ON
This hotfix is already installed.
This particular file (and a few others) has an issue whereby the computer pauses for a LONG time whenever an XREF is placed OR a copy/paste system command is executed (not the COPY AutoCAD command, but Ctrl+C/V). I have audited and purged the file; there are no audit errors. I also tried recovering the file and it made no difference.
I checked one of the problemmatic files on my machine (different machine but still AutoCAD 2012 and Win7) and the same file has the same issues.
New files do NOT have this problem. I have attached the file. Steps to recreate the problem:
1. draw a simple rectangle
2. try to copy/paste it with ctrl+c/v
3. this other machine and my machine both pause for 8-10 seconds
I'm confident that it's something in the file, but I don't know how to track it down.
Within drawing and between drawing copy with basepoint and paste is not working anymore.
View 9 Replies View RelatedStill getting used to the new versions of AutoCAD, I'm using AutoCAD 2012 Lt version.
So my problem is, I want to copy something from one drawing and paste it into another drawing, however, when I copy over my lines/polylines etc, it comes into the new drawing as one straight line, I assume it is in some other orthographic projection to my current drawing, and I don't know how to change it (rotate it?) to suit the current drawing....
I regularly use CTL-C & CTL-V to move objects from one drawing to another. That is I used to but now it's broken. When I select objects and use CTL-C, the command line says "_copyclip x found" (where "x" is the number of objects). I then go to another drawing and use CTL-V whereupon the command line says "_pasteclip" but I get no opportunity to select a base point and nothing more happens. I found a string describing this exact problem and a member suggested a "HotFix" of file "acdb17.dll" I searched my ACAD install folder and found no such file. I searched the entire hard drive and didn't find it. I put the supposed magic file in my ACAD folder (along with all the other dll files), re-started AutoCAD and still I can't use windows copy and paste. These commands work as expected in all other programs, just not Auto CAD. It's not that I'm married to the clipboard but I really need to move objects from one drawing to another. I also tried first saving all objects as a block but that didn't work. I've read where this problem exists in 2007 but I used to use 2007 with no problem. I'm on 2002 now and it used to work on that too.
View 4 Replies View RelatedA few of the computers are having problems with the Copy/Paste function. They had it working a few times and after that, it stopped working (can't paste after copying). Have tried restarting autocad and the computer but the issue is still there. Have also tried updating the service pack to the latest version. It works for a while and stopped working again.
View 5 Replies View RelatedWhen I try to copy and pate any element within the same drawing it won´t paste it will say: "specify insertion point" and I´ve given up.
I tried PICKFIRST but it is set to 1, also tried checking if it would fit in my screen or if the zoom was messed up, but nothing works!
I am using ACAD 2000. My wblock and copyclip commands are not working only in one specific drawing. I am working in modelspace.
When I wblock it lets me select the objects and assign a file to save the objects to. When I hit OK it gives me no error but no file is created.
When I copyclip it gives me no error, but when I pasteclip, nothing happens.
I tried saving the drawing as something else. This drawing simply won't let me copyclip or wblock. I can use the copy command to make multiple copies of the object in question within the drawing. I tried restarting my PC and this particular drawing still has the same problem. Other drawings are fine.
I'm using two different .psd files - on one, copy/paste (or Cmd+C, then Cmd+V) works perfectly after I have made a selection - it creates a new layer. On the other, this doesn't happen at all. I would attache the file but I don't think I can...
In any case, they are both simple files for Photoshop beginners. The one started out the same as the other, but I went through some basic steps in my learning, and now I am unable to copy/paste in the second file.
All of a sudden I am not able to copy and paste. I am trying to copy a vector outlined image from one illustrator file to another. I have used both my short cut keys and the edit tab. I tried closing out and starting on a new document, but nothing. I don't know if I accidentally changed an important setting or what?
View 2 Replies View RelatedI've been using Photoshop CC since march and this is a new issue. Not previously a problem until today.
When I select and area to copy, from a JPEG or photoshop PSD photograph, and make a new file to paste it into, the new file comes up the same size as the clipboard contents, as it is meant too, but photoshop will no longer allow me to paste. The selection EDIT, Paste is still there in black, not greyed out. I temporarily fixed it by restarting my computer and it worked until I closed Photoshop down again and reopened it, problem is back...what is going on?
Is it to do with preferences and how do I change them to fix this?
the only thing I've changed recently was telling JPEG files to use photoshop as the default programme to open up in my computer. I changed this because Bridge was no longer showing photoshop as an option when you rightclick an image and chose which file to use to open it. The fix was to close Bridge, chose a jpeg and change the default to photoshop to open it.
I'm running windows 7 home premium 64 bit.
Recently upgraded to LR 4.1.The copy and paste settings and also synchronize setttings in LR 4.1 has stopped working. Rebooted, nothing new added.
View 14 Replies View Related1, the commands DO work if the text is confined to just ONE page, even if there are multiple linked text frames.
2, it's only the Copy command that doesn't work. Once copied, text does paste irrespective of the amount of text or linked pages.
And do I have to wait for 6.3 to get a resolution ? On Win 7, 64 bit
I can't paste any object only in one drawing
View 9 Replies View RelatedI have autocad lt 2009, previously when I wanted to trace a drawing I would go to paint, copy the drawing and then paste it in autocad on one layer and do the drawing on another layer worked great, But now when I do the same process it doesn't work.....previously I could draw on the image, could edit the lines, copy, erase, move etc. But now when do this if I have to copy a line I select copy and when I click on the line I want to copy the jpg drawing goes away, or if I try to erase a line the drawing will get deleted, Do I need to uninstall autocad and reinstall?
View 5 Replies View RelatedWhen using the Clipboard to move entities from one drawing to another I need to open the window Tools; Options; and that's it for the Paste as Block and Paste Options to be available. What I mean is do I need to do this with each new session of LT? That I will need to check out. I tried my Template and it allowed Paste without going to the Options Dialog in the same session.
Object selection limit for display of grips is set to 32,000
One of our AC08LT workstations is very slow on Copy / Paste command... Not bound to one dwg... Happens with any dwg.
View 4 Replies View RelatedI'm using Autocad 2002.
I am having trouble copying out of a drawing (model space) which i received from someone else, and pasting into my own. The properties on the original dwg file suggest it was created Sept 2001. It appears to copy OK (copyclip/copybase), but when i jump into my file and try to paste, the command line just reads:
_pasteclip
and nothing appears in my model space.
I've tried zooming extents, exploding the original, changing layers and line types etc into the same as in my own dwg. I've also tried to convert/save the dwg file into dxf's and other version dwg's....without success.
I have about half a dozen drawings received from the same source, and they all let you copy data into them, but won't let you copy/cut out.
I have been having a problem with AutoCad 2012 LT when a am working in the model space I can you the ctrl c and ctrl p commands for a short amount of time and then they will not work. I can open a different model space and they will work in that one, but when I go back to the original one the will not work. I have tried shutting down autocad and the computer, but when I open everything back up the commands still will not work in that model space. I have reinstalled autocad and that brings them back for a short amount of time.
View 5 Replies View Relatedis it possible to copy and paste parts in an assembly but also keeping any constraints set on the part?
I.e. if I had a square block constrained to a flat face of a floor, when I copy and paste the block many times I would like all the copy blocks to still be constrained to the floor.
LT 2011- I place a JPEG of a logo on my sheet in model space. Is there any way to manipulate it as in moving it, making it a tad smaller, etc.? Am I able to copy and paste it
View 1 Replies View RelatedUsing copy and paste to add symbols to a layer, after a point the symbols will no longer paste.
View 3 Replies View RelatedI have one big problem copy and paste symbols in one idw to another idw it takes to much time.it's possible through macro or ilogic for copying symbols in drawings?
View 4 Replies View Relatedusing map 3d 2012 with windows 7 and when copy and try to paste it takes roughly 3.5 minutes.
View 1 Replies View RelatedMe and some fellows at work have been noticing a significant increase in the time it takes to copy with base point and paste into a different drawing file. Maybe it is just the 2012 version of the software , what has changed or how to minimize the time this takes. I don't see any reason it should take up to a minute to copy a few polylines from one drawing to the next.
View 5 Replies View RelatedI cannot seem to paste into this one drawing that a client has issued to me. I can paste into all associated x-refs just fine, but the main drawing is the issue. Before we get into things I have tried all the most common things already.
- I have checked layeer Visibilties and unreconciled layers.
- I have run audit and have purged/scalelistedit all drawings
- I have done almost everything ><
To sum it up I think it is global variable of some sort.
We installed 2013 version of Autodesk Civil3D, and strange things with Copy/Paste from one drawing to another happend!
If I try to copy some autocad objects like solid HATCH for ex,. from one file to another - I select drawing copy from, select Hatch, press Ctrl+C or rightclick > Clipboard > Copy, then select destination drawing, press Ctrl+V or rightclick > Clipboard > Paste, and I see in command window:
" _pasteclip Duplicate definition of block _Closed ignored.Duplicate definition of block _DotBlank ignored."The time interval is very long for single hatch copying.
I tryed audit/purge, and copying the HATCH again, - and now I see in destination drawing some strange array of LINE obects, it is not my HATCH! AutoCAD always starts do temporary save while doing this copy.
Else, if I open new two pure drawings, and start copy any types of acad objects between each other, so all works fine and quickly, no temporary saves, only remarkable pause starts above 20000 object copying, its quite acceptable for me, and still shorter time, than copy a single HATCH.
I suppose the problem is in drawing file, because if we make purge/audit than save and reopen drawing - sometines is it possible to copy, but after all we need to do this each time we want to copy acad objects to another file. This annoying issue have our another team members too, it prevents to do our job.
I found, that with HATCH object some blocks is ALWAYS copying from one file to another.
I have 2006 AutoCAD LT and have been trying to copy and paste something from one drawing to another and
ARX ERROR: eDuplicateKey
keeps popping up!