Lightroom :: Synchronize / Copy And Paste Settings Not Working In 4.1
Jun 22, 2012Recently upgraded to LR 4.1.The copy and paste settings and also synchronize setttings in LR 4.1 has stopped working. Rebooted, nothing new added.
View 14 Replies
ADVERTISEMENT
Lightroom :: 5.3 - Copy / Paste Saturation Settings?
Jan 21, 2014I have corrected my saturation on a photo in the Develop module and would like to copy that saturation to other photos. I click 'copy' in the lower left and get the dialog to select my choice of settings, so I only check saturation. I then move to my desired recipient image and click 'paste' and nothing happens. Same result in Library module when I use Photo > Develop Settings > Copy Settings and Paste Settings.
I am using LR 5.3 on Windows Pro 7
Lightroom :: Copy / Paste Settings In Develop Module Never Works First Time
Mar 12, 2012Only just noticed this one since upgrading from LR4 Beta to LR4. First session developing a few shots taken over the weekend (.CR2 RAW files). When I only have a few shots, all taken in the same environment, I tend to just get the first one right and then Copy the Develop settings, and paste them onto each subsequent shot.
What happens on my 64 bit Windows 7 box - the first time I paste the settings to any shot, I get the task bar appear at the top right, which after a brief time changes to 'task completed' - but no settings have been pasted. If I then paste the settings it works the second time.
Lightroom :: Copy / Paste Color Tint / Temperature Settings In Develop
Dec 8, 2013Lightroom 5.2 I have been trieing to copy and paste settings from one .dng file into the next in the develop module. I tried to copy (shift command c) the color temperature and tint and paste in the other file (shift command v) but nor Kelvin nor green magenta balance changes.
View 2 Replies View RelatedIllustrator :: Won't Copy And Paste At 300 PPI Regardless Of Settings
Feb 10, 2014I just recently reformated my computer and I've been having an issue with copy and paste from Illustrator to Photoshop. Before I could copy a 2"x2" vector box from Illustrator into photoshop making a new document and the size and resolution would match. That is the new document would say 2"x2" at 300 ppi in photoshop and the preset would read "clipboard". I would then hit ok and paste and it would match perfectly. Now since I've reformated, photoshop always creates a new document with the wrong size regardless of the settings I enter in Illustrator or photoshop. I have document raster and effects set at 300 ppi in Illustrator and I have the new document set at 300 in photoshop, but it always transfers the 2"x2" box at 72 dpi regardless of settings. Again this used to work before so I'm assuming there is some setting I forgot about.
The main issue is the clipboard preset is not matching the document size, its almost as if Illustartor is telling photoshop it's a different resolution when it's not. Copying to 72 ppi seems to have no issue, which makes me think Illustrator just isn't sending it out at 300 ppi, but I don't know why as I have the document set at 300 ppi. I confirmed this as I can make a 2"x2" box in photoshop and paste into Illustrator and it reads as 2"x2" at 300 ppi in Illustrator, but if I copy from Illustrator back to photoshop it pastes it at 72 ppi. Changing the settings to 300 ppi in Illustrator seems to have no effect. Might be a bug. Should I try reinstalling?
Photoshop :: Why Copy / Paste Not Working On CS5 On Mac
Dec 21, 2012I'm using two different .psd files - on one, copy/paste (or Cmd+C, then Cmd+V) works perfectly after I have made a selection - it creates a new layer. On the other, this doesn't happen at all. I would attache the file but I don't think I can...
In any case, they are both simple files for Photoshop beginners. The one started out the same as the other, but I went through some basic steps in my learning, and now I am unable to copy/paste in the second file.
Illustrator :: Copy And Paste Not Working
Apr 16, 2013All of a sudden I am not able to copy and paste. I am trying to copy a vector outlined image from one illustrator file to another. I have used both my short cut keys and the edit tab. I tried closing out and starting on a new document, but nothing. I don't know if I accidentally changed an important setting or what?
View 2 Replies View RelatedPhotoshop :: Copy And Paste Stopped Working In CC?
Aug 17, 2013I've been using Photoshop CC since march and this is a new issue. Not previously a problem until today.
When I select and area to copy, from a JPEG or photoshop PSD photograph, and make a new file to paste it into, the new file comes up the same size as the clipboard contents, as it is meant too, but photoshop will no longer allow me to paste. The selection EDIT, Paste is still there in black, not greyed out. I temporarily fixed it by restarting my computer and it worked until I closed Photoshop down again and reopened it, problem is back...what is going on?
Is it to do with preferences and how do I change them to fix this?
the only thing I've changed recently was telling JPEG files to use photoshop as the default programme to open up in my computer. I changed this because Bridge was no longer showing photoshop as an option when you rightclick an image and chose which file to use to open it. The fix was to close Bridge, chose a jpeg and change the default to photoshop to open it.
I'm running windows 7 home premium 64 bit.
AutoCAD LT :: 2012 Copy And Paste Not Working?
Aug 10, 2012I have recently upgraded to AutoCAD LT 2012. The copy/paste function and the group/ungroup function are not working. I have run service pack 2 with no improvement.
View 9 Replies View RelatedAutoCad :: Copy With Basepoint And Paste Not Working
Feb 27, 2013Within drawing and between drawing copy with basepoint and paste is not working anymore.
View 9 Replies View RelatedAutoCad 2D :: Copy / Paste To New Drawing Not Working?
Jan 2, 2012Still getting used to the new versions of AutoCAD, I'm using AutoCAD 2012 Lt version.
So my problem is, I want to copy something from one drawing and paste it into another drawing, however, when I copy over my lines/polylines etc, it comes into the new drawing as one straight line, I assume it is in some other orthographic projection to my current drawing, and I don't know how to change it (rotate it?) to suit the current drawing....
AutoCad :: Windows Copy Paste Not Working
Oct 1, 2011I regularly use CTL-C & CTL-V to move objects from one drawing to another. That is I used to but now it's broken. When I select objects and use CTL-C, the command line says "_copyclip x found" (where "x" is the number of objects). I then go to another drawing and use CTL-V whereupon the command line says "_pasteclip" but I get no opportunity to select a base point and nothing more happens. I found a string describing this exact problem and a member suggested a "HotFix" of file "acdb17.dll" I searched my ACAD install folder and found no such file. I searched the entire hard drive and didn't find it. I put the supposed magic file in my ACAD folder (along with all the other dll files), re-started AutoCAD and still I can't use windows copy and paste. These commands work as expected in all other programs, just not Auto CAD. It's not that I'm married to the clipboard but I really need to move objects from one drawing to another. I also tried first saving all objects as a block but that didn't work. I've read where this problem exists in 2007 but I used to use 2007 with no problem. I'm on 2002 now and it used to work on that too.
View 4 Replies View RelatedAutoCAD LT :: 2013 Copy / Paste Not Working After Few Times
Jan 6, 2014A few of the computers are having problems with the Copy/Paste function. They had it working a few times and after that, it stopped working (can't paste after copying). Have tried restarting autocad and the computer but the issue is still there. Have also tried updating the service pack to the latest version. It works for a while and stopped working again.
View 5 Replies View RelatedAutoCAD 2010 :: Copy / Paste Option NOT Working
Oct 17, 2013When I try to copy and pate any element within the same drawing it won´t paste it will say: "specify insertion point" and I´ve given up.
I tried PICKFIRST but it is set to 1, also tried checking if it would fit in my screen or if the zoom was messed up, but nothing works!
AutoCad :: Wblock And Copy / Paste Clip Not Working
Nov 26, 2008I am using ACAD 2000. My wblock and copyclip commands are not working only in one specific drawing. I am working in modelspace.
When I wblock it lets me select the objects and assign a file to save the objects to. When I hit OK it gives me no error but no file is created.
When I copyclip it gives me no error, but when I pasteclip, nothing happens.
I tried saving the drawing as something else. This drawing simply won't let me copyclip or wblock. I can use the copy command to make multiple copies of the object in question within the drawing. I tried restarting my PC and this particular drawing still has the same problem. Other drawings are fine.
Lightroom :: Difference Between Copy Metadata And Synchronize Metadata
Mar 23, 2012As far as I can tell, Copy Metadata and Synchonize Metadata do the same thing. Is there a difference in what they do?
View 1 Replies View RelatedCorelDRAW Graphics Suite X6 :: Copy / Paste Commands Still Not Working With Linked Texts - Even After Update
Dec 4, 20121, the commands DO work if the text is confined to just ONE page, even if there are multiple linked text frames.
2, it's only the Copy command that doesn't work. Once copied, text does paste irrespective of the amount of text or linked pages.
And do I have to wait for 6.3 to get a resolution ? On Win 7, 64 bit
Lightroom :: Cut And Paste All To Virtual Copy Changes Dimensions
Sep 4, 2013I have an image from a 7D to which I have only applied Enable Lens Profile, Remove CA, Constrain to warp, Manual Vert Perspective and Crop with Constrain Aspect Ratio Switched off.
The cropped dimensions of this image is now 2763 x 4472.
If I copy all settings and paste to a fresh untouched virtual copy of this image the resulting size is 2752 x 4453. The shot is part of a bracketed tripod shoot in AV mode, if I copy and paste to the other two untouched images the resulting size is also 2752 x 4453.
Lightroom :: Copy Part Of Image And Paste It Onto Another Photo?
May 30, 2012I'm trying to take some writing from one image and paste it onto another photo.
View 1 Replies View RelatedLightroom :: Copy And Paste Part Of Image In One Photo To Another In 4?
Jul 28, 2012Is it possible to copy and paste part of an image in one photo to another in LR4? I have a pc.
View 1 Replies View RelatedLightroom :: White Balance Copy / Paste - Absolute Or Relative Value?
Mar 19, 2013The question is basically when you copy the White Balance setting from one image and paste it into another, is the pasted setting an absolute value or a relative value?
For example... I import three RAW images, each shot with Auto White Balance.
Image #1 is a gray card and with a WB of 6500K.Image #2 is a product shot with a WB of 6000KImage #3 is a product shot with a WB of 6200K
Let's say I adjust the WB in Image #1 to 6400K - an adjustment of -100K from the "as shot" WB.
When I copy those WB settings from Image #1 to Images #2 and #3, will the target images get an absolute value of 6400K? Or an adjustment of -100K?
Would I have:
Image #1 = 6400KImage #2 = 6400KImage #3 = 6400K
... or ...
Image #1 = 6400KImage #2 = 5900KImage #3 = 6100K
Lightroom :: IPTC Metadata - Copy And Paste Data Within One Picture
Nov 26, 2012So here's the problem: I am working for a photo journalist/traveling photographer moving his 8tb database into Lightroom 4.Now, for whatever reason, he wants the ISPC-metadata headline, the title, and the caption to be same for each picture. What I mean by that is not simply giving every picture the same exact name, but rather have a picture with the headline "Machu Pichu during Sunset" also have the title ""Machu Pichu during Sunset" and the caption "Machu Pichu during Sunset". So far I've done copy and paste between those boxes (I usually only have a headline) for every single picture, but as you might imagine, with 8tb, this will drive you absolutely insane. What I'd like is to have is some sort of Metadata preset telling Lightroom to just take the headline and copy and paste it to title and caption. Is there any way that is possible? This would really save me tons of completely redundant work.
View 1 Replies View RelatedPhotoshop :: Keep Adjustments Made In Lightroom As A Selection To Copy And Paste To New File?
Jun 25, 2012I transfer my adjustments from lightroom to photoshop for additional editing. The adjustments show in the new Photoshop file. However, when I make a selection from that file and copy and paste it into a different Ps file, it does not show the adjustments. I even tryed saving the adjusted photoshop file as a jpeg and then opening it up and reselecting what I want.....Copy and paste it.....and the adjustments still don't appear on the different Ps file/photo. How can I keep the adjustments made in lightroom as a selection to copy and paste to a new file?
View 2 Replies View RelatedLightroom :: Move Brush Adjustment - Copy Settings
Aug 19, 2013For example you take 2 shots of a model, but with slightly different position, it sucks having to redraw a whole new brush on the next photo. Would be great to be able to sync then just drag the brush pin into place. Like how you can with the radial fand ND filter. And it would be awesome to be able to copy the settings of one, and the paste them onto another pin on another area or another photo.Right now its so time consuming having to sync brush adjustments, erase them, then repaint where I want the same settings applied to a different part of another picture.
Second, need to be able to select multiple or all pins, to be able to move them at the same time. Same for for the ND, radial, spot healing pins.
Third, we need to be able to copy brush settings via right clicking the pin, as well as maybe in the brush panel at the top so its something like like:
Mask: New | Edit | Copy | Paste
Lightroom :: Copy Develop Settings On Multiple Images From One Folder To Another?
Apr 5, 2014I have a bunch of Fuji X-T1 raw images that I have converted to DNG form. Once Lightroom supports X-T1 raw images directly, I would like to replace the DNG files by the corresponding raw files (which I have saved) without having to redo all of my edits.
I've tried an experiment with a NEF file, which Lightroom supports: If I convert it to a DNG file, import the DNG file, then replace the DNG file with the corresponding NEF file, Lightroom still thinks the file is named DNG. This behavior makes me nervous. So what I would like to do is to import all of the Fuji raw files, then transfer the develop settings from each DNG file to the corresponding raw file, then finally archive and delete the DNG files.
Is there any way to do this other than by hand? That is, if I have a folder with a few hundred DNG files, is there any way to tell Lightroom to take the develop settings of every file in the folder and transfer them to the correspondingly named file in the folder of raw files?
way of accomplishing this that does not involve copying and pasting the data for every image by hand?
Lightroom :: How To Copy Settings Of Adjustment Brush From TIFF To Original Raw File
Jan 21, 2014I have been working on a file in photoshop cs5 that had come from lightroom 5.3. This was then saved (automatically becomes tiff file in Lightroom). I then wanted to make some more adjustments to it in lightroom (using local adjustment clarity). I then tried to copy the settings of the adjustment brush from the tiff to the original raw file. This is where it gets very strange. The adjustments are copied but they are rotated ccw by 90 degrees! I can replicate this every time.
View 22 Replies View RelatedLightroom :: Edit A Copy With Adjustments No Longer Working
Jan 12, 2013I use to be able to edit a copy with lightroom adjustments when I sent my photo to CS5. It is no longer working. how can I recover that function?
View 1 Replies View RelatedLightroom :: Edit Copy With Adjustment Suddenly Stopped Working
Feb 4, 2013I have been using lightroom 3.4 and photoshop CS6 for sometime. However suddenly I cant move images from lightroom to photoshop (Ctrl+E) with the "Edit a copy with lightroom adjustment".
When I click this option, it opens the Photoshop. But doesnt open the image. However the other two options "edit a copy" and "Edit original" works fine.
Also when i add photoshop again as another external editor, it works fine. But as you all are aware this create another copy of the image.
What I did I checked the applications path for photoshop and it was correct. I uninstalled lightroom and reinstalled.
Lightroom :: 4.4 - Cannot Synchronize To The Catalog
Apr 7, 2013Adobe lightroom 4.4
MAC 10.8.3
I cannot synchronize to the catalog. The proccess never finish and don't find any photo.
Lightroom :: Synchronize Folders Is Out Of Sync
Nov 28, 2012I keep my photos in a folder, with hundreds of sub-folders.
I use Photo Mechanic for tagging, selecting, purging and meta-data management becuase it is very fast. Then I import into LR by asking it to synchronize with the top folder.
The problem is that LR4 (and LR3 before it) identifies a couple of thousand photos as being "new" and needing to be imported, then when I tell it to Import by clicking the "Synchronize" button, it grunts for a minute or two and then comes back and says "No photos or videos were found to import". So if there is nothing to import, why does it keep saying there are 2,563 "new" photos? It hangs on this same number for weeks at a time, though it has crept up from LR3 when it was only about 1600.
Why is Synchronize out of sync? How can I get it really sychronized and keep it synchronized?
I have the box regarding JPGs adjacent RAW checked so that they are treated as separate images. I've tried checked and unchecked and it has no effect on this problem.
Lightroom :: 4.2 Doesn't Synchronize All Selected Photos
Dec 7, 2012I'm using Lightroom 4.2 (I have used Lightroom since the very beginning) and I found following problem:
I am in the development moduleI select all photos in my folderI activate the automatic synchonizationI change the selected user defined lens from the Tamron 70-200/2.8 (which is wrong) to the correct Tamron 28-75/2.8 (-> there's a known problem in the automatic detection of the different Tamron lenses because of the ID in the lenses, so automatic detection doesn't work - tell me if I am wrong!)The progress bar shows that it's writing the changes to the selected photos (which takes a moment)Then it seems to be synchronized and I continue workingAfter some photos it shows the 70-200 mm lens to be selected again!
So obviously it didn't sychronize all selected photos!
My system: Windows 8 64-Bit computer, 16 GB RAM
