Lightroom :: Move Brush Adjustment - Copy Settings
Aug 19, 2013
For example you take 2 shots of a model, but with slightly different position, it sucks having to redraw a whole new brush on the next photo. Would be great to be able to sync then just drag the brush pin into place. Like how you can with the radial fand ND filter. And it would be awesome to be able to copy the settings of one, and the paste them onto another pin on another area or another photo.Right now its so time consuming having to sync brush adjustments, erase them, then repaint where I want the same settings applied to a different part of another picture.
Second, need to be able to select multiple or all pins, to be able to move them at the same time. Same for for the ND, radial, spot healing pins.
Third, we need to be able to copy brush settings via right clicking the pin, as well as maybe in the brush panel at the top so its something like like:
Mask: New | Edit | Copy | Paste
View 4 Replies
ADVERTISEMENT
Jan 21, 2014
I have been working on a file in photoshop cs5 that had come from lightroom 5.3. This was then saved (automatically becomes tiff file in Lightroom). I then wanted to make some more adjustments to it in lightroom (using local adjustment clarity). I then tried to copy the settings of the adjustment brush from the tiff to the original raw file. This is where it gets very strange. The adjustments are copied but they are rotated ccw by 90 degrees! I can replicate this every time.
View 22 Replies
View Related
Oct 16, 2013
I have a client, who use Lightroom.After software update, all his pre-defined custom brush settings are disappeared. It is possible to reload the old settings from somewhere?
View 2 Replies
View Related
Jun 19, 2004
I have an action that creates an adjustment layer (curves) which stops and prompts you to load the saved curves file.
If I double click that step to edit, I can load the "saved" curves file and it will run flawlessly. BUT...if I move the curves file or share this action with someone, the action will no longer function since the saved path is incorrect.
Is there any way to open up the saved curves file and just write that into the action? There are a lot of settings and I would have a very hard time recreating the curves adjustment from scratch.
View 4 Replies
View Related
Mar 20, 2012
It's never been a problem before, but the anchor point for the Adjustment Brush in ACR is sitting exactly where I need to see what is happening. I can delete and start again, but if there is way to move or hide the anchor point while still being able to adjust the setting, it would be handy to know for next time it happens.
View 2 Replies
View Related
Jun 11, 2013
When I use the Adjustment brush it turns the brush line red.... even is I change the exposure, tint, saturation, color...etc
I cant seem to undone it... even if i restart program
View 1 Replies
View Related
Jun 11, 2013
When I use the Adjustment brush it turns the brush line red.... even is I change the exposure, tint, saturation, color...it is always red
View 1 Replies
View Related
Oct 15, 2008
In Using the adjustment brush with exposure mode active I get a light red/pink color over the area the brush is used, this is not the mask that shows up when the curser is put over the pin. I also can not not make real time adjustment but when I click the adjustment brush to turn it off I can see the changes I tried to make.
View 2 Replies
View Related
May 19, 2013
My adjustment brush doesn't want to move away from painting local colour adjustments. I would like to move it to paint local exposure adjustments. What I am doing incorrectly.
View 1 Replies
View Related
Jul 17, 2012
When I try to use the adjustment brush by selecting the brush, the sliders shown for the brush change the complete photograph, which I do not want it to do. When I use the brush it makes changes. But, if I make a slider change that I want for the brush it actually changes the complete photograph. It has worked properly in the past. I was able to make a slider change and it would only make changes to the area the brush selected.
View 1 Replies
View Related
Jul 7, 2012
In Develop, when preparing to use the Adjustment Brush, first I adjust the size of the brush. I slide my cursor along the Size slider and the displayed adjacent "sample brush" varies in size. Next, I move the cursor into the field of the image. When the cursor crosses over into the image field, the circle indicating brush size changes; it gets larger by roughly 25%. I have been using the adjustment brush now for what seems like 2 or 3 years, but I can't recall it changing size before. Is this normal? 2 screenshots: a) the cursor(sadly not reproduced in the screenshots) hovers at the slider; b) The cursor is moved to the image field, and the Adjustment brush circle has increased in size.
Mac OS 10.7.4(current), Macbook Pro w/ NEC external mon., 2.8GHz, 8GB ram on 2 cores, Catalog on internal HDD, Library on external HDD, LR 4.1, Nikon raw files.
View 8 Replies
View Related
Jan 20, 2013
I am new to lightroom - trying to use adjustment brush - but it always is pink regardless of where I set the color
View 18 Replies
View Related
Oct 11, 2012
I am using LR 4.2 and I have a question about the non-destructive editor, specifically the use of adjustment brushes. After I work with an adjustment brush and then go on with my editing I can't figure out how to make tweaks to what was darn earlier on the adjustment brush area. With all the other editing functions I can change something and then later make a change. For example, I can set -10 highlights and then later I can change it to -15 highlights and then later change it to something else. With things I have done with adjustment brushes though I haven't figured out the technique to do that. If I select adjustment brush and then click on the area that I had earlier changed with an adjustment brush it doesn't seem to reselect that area so that I can tweak it. Is there a way to go back and tweak areas selected with an adjustment brush?
View 3 Replies
View Related
Mar 11, 2013
everytime i try to use the adjustment brush it crashes lightroom?
View 12 Replies
View Related
Oct 12, 2013
Wheever I try to use my adjustment brush in LR 4 I get a red tint as I apply what ever adjustment I'm trying to do.
View 1 Replies
View Related
Jan 23, 2014
When I select the adjustment brush and paint across the image no changes are made. I have tried moving the sliders to the extremities but no effects to the image are made.
View 2 Replies
View Related
Feb 28, 2012
I have a couple questions regarding adjustment brushes in LR 3.6 .
1. I recently found out there should be Iris Enhance, Skin Soften, etc. brushes in the presets. I can't find them under the adjustment brush. I've tried going to Edit->Preferences->Presets->Restore Local Adjustment Presets as several others have suggested but it doesn't appear to do anything.I have found these files where I've read they're supposed to be (../AppData/Roaming/Adobe/Lightroom/Local Adjustment Presets) but I can't find them in LR unless they're somewhere other than the Adjustment Brush panel.
2. Also, 'O' turns the mask overlay on and off as it should. I have 'on' set to red but for some reason 'off' is set to blue and I have to desaturated it everytime I turn off the overlay mask. How do I change the "off" state to be no color?
View 3 Replies
View Related
May 18, 2012
My adjustment brush is not working. I can select it, move it, etc. but it makes no changes. i.e. I want to whiten teeth, I have tried to adjust exposure, brightness, contrast even make them green nothing works. But I can move the brush, it shows up as if I had made changes when I click the done button and reselect my adjustment brush but no change has been made!
View 4 Replies
View Related
Nov 5, 2012
In Jeff Schewe's book "The Digital Negative," I read that Lightroom 4 comes with Adjustment Brush and Graduated Filter presets. I use Camera Raw (CS6), which doesn't come with presets. Looking for the settings for each Lightroom 4 preset so I can create the same presets in Camera Raw?
View 1 Replies
View Related
Aug 8, 2012
I am fairly new to Lightroom, and the Adjustment Brush tool specifically, and I am having some problems with it! I have watched tons of tutorials on using it, and it seems relatively easy...although when I go into my program and attempt to use it, nothing happens to my photo...say if I wanted to adjust the exposure on the face of an individual, I will go in and select the tool, decrease the exposure, make the brush and feather the size I want it, and when I go to "paint" the area I want altered, nothing happens? The pins appear as if to show me that's where I started, but then no change happens to the area I attempted to paint. Do I need to select something somewhere to be able to actually use the brush to paint?
View 3 Replies
View Related
Mar 19, 2013
Say you have a gradient adjustment that you're using on one side of an image? Can you copy it to use on the other side of the image?
View 2 Replies
View Related
Jan 10, 2014
I have a new computer and would like to move my adjustment brushes from my old computer to my new computer i.e. teeth whitning.
View 4 Replies
View Related
Aug 19, 2013
So why in the world would I update Lightroom in the middle of a job.?
Before I was able to do in and touch up shadowy areas using (K) adjustment brush, but now it doesn;t seem to work. The radial brush does a good job for a defined area but for SPOT touching I have always used the the adjustment brush?
Is there a setting or am I missing something or is this a bug?
View 1 Replies
View Related
Jan 14, 2013
I just installed the LR4 upgrade (MAC). All other functions seem to work, but when I select the adjustment brush, LR quits unexpectedly.
View 2 Replies
View Related
Apr 6, 2014
I recently took some Milky Way photos and was attempting to process them in Lightroom. Many of the effects I am using are hardly doing anything. I'll use clarity for an example.
I typically use the adjustment brush to add effects like clarity soley to the Milky Way. I find a setting of 40-60 is usually sufficient. Sliding the scale from -100 to 100 is DRAMATIC, making the Milky Way overly "pop" in a disgusting, artificial manner.
However, on my most recent batch when I applied a clarity of 50 I could hardly tell. Sliding the slider from -100 to 100 had a very small difference. Other effects are behaving similarly.
When I go back to my older photos the brushes seem to work. However, any of these new photos (which have various exposures settings) all behave similary in that I just can't get the effects to do much. The originals of my older photos and my new photos look comparable.
View 3 Replies
View Related
Nov 8, 2013
How do I get the adjustment brush to "paint" white? I have tried the color panel, but nothing works.
View 2 Replies
View Related
Mar 31, 2013
When I first started using Lightroom, the adjustment brush worked fine. Now, I will select the adjustment brush, click on the photo I'm editing, and a red circle will appear depending on the circumference I chose. If I look at the thumbnail in the navigation sidebar to the left, the red circle appears as a black circle in that photo. In addition, none of the sliders will work with the exception of the exposure adjuster. However, the effects of adjusting the exposure only appear in the thumbnail in the navigation sidebar; the main image will stay red in the area selected.
View 1 Replies
View Related
Oct 7, 2013
My adjustment brush in LR 5 suddenly quit working. It paints a white smudge instead of doing what it should. Even with the latest update, Ver. 5.2, the results are the same.
View 2 Replies
View Related
Feb 1, 2013
I downloaded the trial version of Lightroom 4 onto my Macbook pro and when I try to use the adjustment brush the cursor that normally turns to a brush when you hover any part of the photograph only changes at the very edges of the picture. When I move the cursor towards the center of the photo the cursor changes back to an arrow and I cannot make any adjustments. If I start an adjustment at the edge of the photo I can drag it into the center of it, but I cannot release and then do any further painting in that region. At the point where the brush icon changes the cursor becomes a small arrow that points to the edge of the frame and if I hold down the left mouse button and move to the transition line it becomes a double facing arrow, I can then drag the area I can work in to make it even smaller, but I cannot increase the area.
View 1 Replies
View Related
Aug 22, 2013
Is there any relationship between the amount of luminance slider on the detail panel and the adjustment brush noise slider?
View 2 Replies
View Related
Mar 27, 2013
I recently bought lightroom 4.1. In the first days, everything worked. But now, the adjustment brush doesn't work anymore! What is the reason and what can i do?
View 9 Replies
View Related
