I have corrected my saturation on a photo in the Develop module and would like to copy that saturation to other photos. I click 'copy' in the lower left and get the dialog to select my choice of settings, so I only check saturation. I then move to my desired recipient image and click 'paste' and nothing happens. Same result in Library module when I use Photo > Develop Settings > Copy Settings and Paste Settings.
Only just noticed this one since upgrading from LR4 Beta to LR4. First session developing a few shots taken over the weekend (.CR2 RAW files). When I only have a few shots, all taken in the same environment, I tend to just get the first one right and then Copy the Develop settings, and paste them onto each subsequent shot.
What happens on my 64 bit Windows 7 box - the first time I paste the settings to any shot, I get the task bar appear at the top right, which after a brief time changes to 'task completed' - but no settings have been pasted. If I then paste the settings it works the second time.
Lightroom 5.2 I have been trieing to copy and paste settings from one .dng file into the next in the develop module. I tried to copy (shift command c) the color temperature and tint and paste in the other file (shift command v) but nor Kelvin nor green magenta balance changes.
I just recently reformated my computer and I've been having an issue with copy and paste from Illustrator to Photoshop. Before I could copy a 2"x2" vector box from Illustrator into photoshop making a new document and the size and resolution would match. That is the new document would say 2"x2" at 300 ppi in photoshop and the preset would read "clipboard". I would then hit ok and paste and it would match perfectly. Now since I've reformated, photoshop always creates a new document with the wrong size regardless of the settings I enter in Illustrator or photoshop. I have document raster and effects set at 300 ppi in Illustrator and I have the new document set at 300 in photoshop, but it always transfers the 2"x2" box at 72 dpi regardless of settings. Again this used to work before so I'm assuming there is some setting I forgot about.
The main issue is the clipboard preset is not matching the document size, its almost as if Illustartor is telling photoshop it's a different resolution when it's not. Copying to 72 ppi seems to have no issue, which makes me think Illustrator just isn't sending it out at 300 ppi, but I don't know why as I have the document set at 300 ppi. I confirmed this as I can make a 2"x2" box in photoshop and paste into Illustrator and it reads as 2"x2" at 300 ppi in Illustrator, but if I copy from Illustrator back to photoshop it pastes it at 72 ppi. Changing the settings to 300 ppi in Illustrator seems to have no effect. Might be a bug. Should I try reinstalling?
I have an image from a 7D to which I have only applied Enable Lens Profile, Remove CA, Constrain to warp, Manual Vert Perspective and Crop with Constrain Aspect Ratio Switched off.
The cropped dimensions of this image is now 2763 x 4472.
If I copy all settings and paste to a fresh untouched virtual copy of this image the resulting size is 2752 x 4453. The shot is part of a bracketed tripod shoot in AV mode, if I copy and paste to the other two untouched images the resulting size is also 2752 x 4453.
The question is basically when you copy the White Balance setting from one image and paste it into another, is the pasted setting an absolute value or a relative value?
For example... I import three RAW images, each shot with Auto White Balance.
Image #1 is a gray card and with a WB of 6500K.Image #2 is a product shot with a WB of 6000KImage #3 is a product shot with a WB of 6200K
Let's say I adjust the WB in Image #1 to 6400K - an adjustment of -100K from the "as shot" WB.
When I copy those WB settings from Image #1 to Images #2 and #3, will the target images get an absolute value of 6400K? Or an adjustment of -100K?
So here's the problem: I am working for a photo journalist/traveling photographer moving his 8tb database into Lightroom 4.Now, for whatever reason, he wants the ISPC-metadata headline, the title, and the caption to be same for each picture. What I mean by that is not simply giving every picture the same exact name, but rather have a picture with the headline "Machu Pichu during Sunset" also have the title ""Machu Pichu during Sunset" and the caption "Machu Pichu during Sunset". So far I've done copy and paste between those boxes (I usually only have a headline) for every single picture, but as you might imagine, with 8tb, this will drive you absolutely insane. What I'd like is to have is some sort of Metadata preset telling Lightroom to just take the headline and copy and paste it to title and caption. Is there any way that is possible? This would really save me tons of completely redundant work.
I transfer my adjustments from lightroom to photoshop for additional editing. The adjustments show in the new Photoshop file. However, when I make a selection from that file and copy and paste it into a different Ps file, it does not show the adjustments. I even tryed saving the adjusted photoshop file as a jpeg and then opening it up and reselecting what I want.....Copy and paste it.....and the adjustments still don't appear on the different Ps file/photo. How can I keep the adjustments made in lightroom as a selection to copy and paste to a new file?
There's a section of my video that needs a bit more saturation, especially with an effect, but applying it just "jumps" it in. Is it possible to keyframe the saturation? Or is there an effect that has a saturation control so I can add it as an effect and keyframe it's levels from there?
For example you take 2 shots of a model, but with slightly different position, it sucks having to redraw a whole new brush on the next photo. Would be great to be able to sync then just drag the brush pin into place. Like how you can with the radial fand ND filter. And it would be awesome to be able to copy the settings of one, and the paste them onto another pin on another area or another photo.Right now its so time consuming having to sync brush adjustments, erase them, then repaint where I want the same settings applied to a different part of another picture.
Second, need to be able to select multiple or all pins, to be able to move them at the same time. Same for for the ND, radial, spot healing pins.
Third, we need to be able to copy brush settings via right clicking the pin, as well as maybe in the brush panel at the top so its something like like:
I have a bunch of Fuji X-T1 raw images that I have converted to DNG form. Once Lightroom supports X-T1 raw images directly, I would like to replace the DNG files by the corresponding raw files (which I have saved) without having to redo all of my edits.
I've tried an experiment with a NEF file, which Lightroom supports: If I convert it to a DNG file, import the DNG file, then replace the DNG file with the corresponding NEF file, Lightroom still thinks the file is named DNG. This behavior makes me nervous. So what I would like to do is to import all of the Fuji raw files, then transfer the develop settings from each DNG file to the corresponding raw file, then finally archive and delete the DNG files.
Is there any way to do this other than by hand? That is, if I have a folder with a few hundred DNG files, is there any way to tell Lightroom to take the develop settings of every file in the folder and transfer them to the correspondingly named file in the folder of raw files?
way of accomplishing this that does not involve copying and pasting the data for every image by hand?
I have been working on a file in photoshop cs5 that had come from lightroom 5.3. This was then saved (automatically becomes tiff file in Lightroom). I then wanted to make some more adjustments to it in lightroom (using local adjustment clarity). I then tried to copy the settings of the adjustment brush from the tiff to the original raw file. This is where it gets very strange. The adjustments are copied but they are rotated ccw by 90 degrees! I can replicate this every time.
I have autocad lt 2009, previously when I wanted to trace a drawing I would go to paint, copy the drawing and then paste it in autocad on one layer and do the drawing on another layer worked great, But now when I do the same process it doesn't work.....previously I could draw on the image, could edit the lines, copy, erase, move etc. But now when do this if I have to copy a line I select copy and when I click on the line I want to copy the jpg drawing goes away, or if I try to erase a line the drawing will get deleted, Do I need to uninstall autocad and reinstall?
I am running Windows Vista Home Premium 64-bit. I am having trouble copying and pasting things. The issue is that after I copy something/Print Screen, it takes several pastes for Photoshop to finally realize the change. Basically, the first couple of times I paste, the thing that was previously copied gets pasted it. I don't know if it's making a difference but it switches the paste to the latest thing that was copied faster after I minimize and maximize back the program. It's extremely annoying especially because then I have to either undo each time/delete the layers. Plus, I do a lot of frame comparisons between different video sources and it's hard to tell whether the thing being pasted was changed or not.
How do I do a simple copy of one pixel and paste it to another place (I have zoomed in a lot) or if I have't zoomed in that close, copy some area and paste it to another place?
how I can simply copy and paste an area of an image back onto the same image?
On my previous graphics software it was simply a case of highlighting the required area, click 'copy' then click 'paste' and bingo! To copy and paste on Photoshop seems much more involved including a number of complicated steps.
When i copy or copy merged and paste into a new canvas or layer, i get like a small Gradient round the sides of the image, the Gradient goes white. I know its a Copy problem because if i paste the layer selection into MS Paint it still gets that gradient around the sides.
So when you copy and then paste a selection, photoshop almost always pastes way far away from where I copied. Why does it do that and how can I make it stop?
I commonly need to be able to copy something and then paste in the exact same spot.
Ever since I upgraded to CS6, I have big problems copying from illustrator to photoshop. I can get it to succesfully paste about 20% of the time. AI starts "not responding" while I'm trying to paste to photoshop every single time, but can usually snap out of it after a few minutes. It seems to have no rhyme or reason to when it works and when it doesn't.
I am trying to copy and paste a paragraph and only get a single line and not the paragraph here are the steps I take:
- Copy text - select text tool - drag text box - paste text
I get all the words but bunched in one line. I have tried selecting the text layer and selecting Convert to Paragraph and it does nothing. I am sure there is a single option or button I am missing. I can only type titles not a wrapping paragraph in the box
I am not able to copy and paste text from non-Adobe programs (like Keynote or Word) into Photoshop CS6. I get an error message reading "Could not complete the Paste Text command because the clipboard data is empty or invalid." I have tried shutting down Photoshop, shutting down other programs, re-starting my computer, adjusting my Preferences and asking Adobe by phone and chat. I am on a new iMac and have no third party plug-ins installed.
When copying a gradient filled shape from illustrator CS6 to Photoshop CS6 an outline "halo" appears in the Photoshop image although the shape has no outline to begin with. Is this a clipboard issue? Is it an anti-aliasing setting I can change? Apparently it isn't as noticeable when I drag the shape from illustrator to Photoshop as it is when using the copy/paste command. But in both situations there seem to be issues in the border when gradient filled shapes touch other shapes.
I'm sick en tired of copy pasting text and get another output of my font size. For example: I copy a text with a font sz of 16 px, that size become 15.98px.
What's the problem with Photoshop CS6? I only have this problem since i've updated my software.
I'm using two different .psd files - on one, copy/paste (or Cmd+C, then Cmd+V) works perfectly after I have made a selection - it creates a new layer. On the other, this doesn't happen at all. I would attache the file but I don't think I can...
In any case, they are both simple files for Photoshop beginners. The one started out the same as the other, but I went through some basic steps in my learning, and now I am unable to copy/paste in the second file.
I have had this problem many times with both CS6 and CS5. I'm not sure if this is a Photoshop question or a Windows OS 8 question but anyways it seems to only happen with Photoshop.
I copy an image offline to edit in photoshop. After I'm finished I save it and delete the image layer from the workspace to get ready for the next image. I grab another image that I want to paste in the same photshop workspace. When I paste, it pastes the same image I copied first. It even does this when I restart Photoshop, so that's why I think it may have to do with Windows Clipboard.
I'm also really interested in details about how 'Copy/Paste" and the "Clipboard" work with different programs so I can best understand how to utilize it with what seems to be a simple tool, yet I still find myslef with questions because I don't filly undertsnad it.
