AutoCAD Inventor :: 2012 Freeze When Macros Should Load Or Run?
Oct 16, 2012
Working with inventor pro 2012, whenever I try to run a macro, the program freezes. It happens when I press the tools/macros button and it can take 30 sec or more before the macros dialog release and active or I can try to run windows job list which seems to release the jam too. It also happens when I try to run my macro with shortcut key or customized button. It freezes before the macro even loads and it is very frustrating. If I open the macros editor and run the macro from there (run sub) then there is no delay at all!
Autodesk Inventor 2012 SP1 64-bit, win 7
View 9 Replies
ADVERTISEMENT
Oct 16, 2012
Working with inventor pro 2012, whenever I try to run a macro, the program freezes. It happens when I press the tools/macros buttonand it can take 30 sec or more before the macros dialog release and active or I can try to run windows job list which seems to release the jam too.It also happens when I try to run my macro with shortcut key or customized button. It freezes before the macro even loads. If I open the macros editor and run the macro from there (run sub) then there is no delay at all!
Autodesk Inventor 2012 SP1 64-bit, win 7
View 1 Replies
View Related
Mar 4, 2013
Macros in inventor drawing are not activating or it is not automatically generating vba codes.
when creating macros and i assign dimensions to objects but the macros are not generating any codes.
View 3 Replies
View Related
Dec 2, 2011
I just got a new computer and installed Product Design Suite Ultimate x64. Every time I close Inventor, the window immediately stops responding, then will only go away if I stop the process. If I click "End Task" in the Task Manager, it will start to look for a solution to the problem, then immediately close. No error report displays. All other programs work with no issue. All of the settings are default as installed.
So far I have tried:
-Reinstalling with and without SP1
-Installing the latest Autodesk Certified graphics driver
-Using software graphics
-Running as Admin
-Launching in Vista and 2008 Compatibility Modes
Computer:
Lenovo S20
Xeon W3565 3.2GHz
Windows 7 x64
12GB ECC DDR3 PC3-10600
Quadro 4000
View 2 Replies
View Related
Oct 19, 2011
I can't get iLogic to load on my laptop. If I select Tools - Add ins then iLogic shows as load automatically but currently unloaded. If I check loaded, close the dialogue, open it again, then it has gone back to unloaded.
On my desktop, if I check unloaded then iLogic goes away, but if I select loaded it comes back. Similarly, I can turn on/off any of the add-ins such as the Design Accelerator, BIM Exchange, etc at will.
On my laptop, I can load/unload anything except iLogic, which won't load.
Both machines are Dells, running NVIDIA graphics under XP x64. Inventor Pro Product Design Suite was installed on both machines at about the same time from the same installation files. The only difference is that my laptop has Service Pack 1 installed, the desktop machine doesn't.
View 4 Replies
View Related
Apr 30, 2012
How to load the content library for 2012?
View 2 Replies
View Related
May 27, 2013
What the inventor addin load sequence is. I want first load addin and then load another addin what i create it.
View 1 Replies
View Related
Mar 5, 2012
I'm a school teacher in the PLTW program that uses Inventor extensively in my classroom. Our district operates under a 125 seat license. The issue I've run into is on my personal computer (Windows Vista, x64) and is therefore outside the realm of the usual IT guy's duties. The Inventor software was installed on my laptop by the PLTW training staff during my summer session. I *think* it is a stand alone install of the program.
What happens is after I launch Autodesk Inventor, I can see the splash screen, and the inventor.exe task appears in the task manager, however after a few seconds, the splash screen disappears and the program does not launch. There is no error message.
This is confusing since until quite recently I am sure that Inventor was working hunky dory. Also, all the other Autodesk programs seems to function normally (Fusion, Design and Review)
I've tried a repair and reinstall, but the problem still persists. Also, I updated the install with SP 1, but this had no effect either.
I have recently updated my display drivers (ATI Radeon), however, I tried reverting back to the older drivers and still the problem persists, so I don't think it is graphics driver related
View 2 Replies
View Related
Oct 7, 2013
2012 showcase starts to load and then shuts down.
View 3 Replies
View Related
Feb 9, 2012
- Dell XPS 8300 running Windows 7 SP1 64-bit with 12 GB of RAM
- AMD Radeon HD 6800 Series with updated drivers installed
- AutoCAD 2012 64-bit SP1
- ACAD Hardware Acceleration is ON
This hotfix is already installed.
This particular file (and a few others) has an issue whereby the computer pauses for a LONG time whenever an XREF is placed OR a copy/paste system command is executed (not the COPY AutoCAD command, but Ctrl+C/V). I have audited and purged the file; there are no audit errors. I also tried recovering the file and it made no difference.
I checked one of the problemmatic files on my machine (different machine but still AutoCAD 2012 and Win7) and the same file has the same issues.
New files do NOT have this problem. I have attached the file. Steps to recreate the problem:
1. draw a simple rectangle
2. try to copy/paste it with ctrl+c/v
3. this other machine and my machine both pause for 8-10 seconds
I'm confident that it's something in the file, but I don't know how to track it down.
View 3 Replies
View Related
Apr 27, 2012
on a couple of my lager project i have recently had issues with Autodesk Civil 3D 2012 Freezing in Model Space switching between Isometric views. the number of view changes varies each time but seams to freeze during regen of the model.
I have checked the performace tuner and updated my driver, see Attached Log.
We are in the process of changing our CAD Stations over to Windows 7 64 bit, but im not scheduled for a couple more months.
System:
Dell Precision T3400
Windows XP SP3 32 bit
Intel Core2 Quad (Q9550 @ 2.53GHz)
4GB RAM
View 3 Replies
View Related
Sep 21, 2011
I have made some macros and now with the 2012 version of Inventor it is very very slowly to open the dialog box to choose a macro. I have the windows cursor during 30 second in each time I want to select a macro.
When I have made a shortcut for one of my macros it goes good and quikly.
View 1 Replies
View Related
Oct 12, 2012
when I trying to publish in single-sheet file. so I type publish on my command bar, then I chose publish to pdf but when i try to click on publish options to set the location where I need to put the pdf files the publish window freeze. same thing when i click on add sheet button.
NOTE: I have this problem especialy when I used AUtoCAD from home. to use AutoCAD from home I made borrow licence.
View 1 Replies
View Related
Jul 5, 2012
Inventor 2010:
when i create a note in an assembly (accidentally, we never use them), all my macros refuse to run from the buttons in the "User Commands" panel.
Why? Bug? What's happening to cause this? Can we programmatically remove or disable the "Create Note" option from the right-click menu?
View 3 Replies
View Related
Oct 23, 2012
If I set a keyboard shortcut for a macro, it will function properly until the session is closed. When Inventor is opened again, the shortcut will not be on the keyboard customization list. So far, all shortcuts for regular Inventor functions, and even Add-Ins, will stay present when the session is closed and opened. I've been able to reproduce this on a co-worker's computer, so I don't believe it is an issue related to my system.
Edit: Forgot to add, using Inventor 2012
View 3 Replies
View Related
Oct 7, 2013
Short of converting to an add-in is there any way to place macro's into toolbars where you can set the Text of the button to something other than the macro name?
I mean, while to those who write them, there's nothing wrong (really) with a command button titled Invoke_This_Fuction or InvokeFunction, it looks quite odd to everyone else.
If the only way is via add-in, that's fine (though a friendly display name should be an option). Just trying to find out before I spend a boatload of time only to figure out you can't
Also, do all add-ins 'have' to be installed? Or is there a way you can just drop a file in the correct path and it'll appear on next running of Inventor?
View 9 Replies
View Related
Jun 22, 2011
I have a users machine that is displaying some odd behaviour. Their Macros and VBA Editor buttons have stopped working. We have tried several things already but nothing appears to have any effect.
View 9 Replies
View Related
Sep 21, 2012
We have a problem at work with buttons disappearing from the quick access toolbar.
I already looked around and it is being said that it is a bug, wich can be fixed with a service pack. I work in a big company, and they are refusing to do the service pack.
So the next best thing I can figure is to make a macro, wich will add all the macros I want to the quick access toolbar in assembly level, part level, sketch level and drawing level.
View 1 Replies
View Related
Dec 1, 2012
I was trying to figure out the best way of loading an external WPF executable assembly into Autocad. The scenario is simple though to explain.
The user enters a command in Autocad. The command invokes a WPF application, which loads a particular WPF Window. The command also need to pass a parameter to the WPF application when it requests the WPF Window to load. When the user is done with the Window, he closes it like any modal window that appear in Autocad. What are the possible ways to have such an interaction in AutoCAD using .Net and C# and WPF
View 5 Replies
View Related
Aug 26, 2011
My work helpdesk has recently installed AutoCad 2012 and my co worker and I noticed that at the start up its loads very slowly and often when we double click on a DWG to open (without Autocad being already open) it crashes.
View 2 Replies
View Related
Jan 15, 2013
On starting autocad, before anything else appears an error box pops up saying "Unable to load Profile file, some profile information saved in the last session may not be restored". Click to accept the message and autocad starts normally with the exception that the ribbon doesn't show -at all. The user then switches to the classic workspace and back again and the ribbon will appear as expected.
The user, I believe, has local admin rights. I've tried uninstalling and reinstalling to no avail. My next step, is a last resort, which will involve uninstalling, then using some kinda registry cleaner to erase any trace of autocad on the laptop, then reinstalling - this is a bit severe, and will require the co-operation of my own IT dept, which can be like pulling teeth. I'm wondering if there's any other, less time consuming solution to this irritating problem?
ACad, MEP, 3DS Max
Windows 7x64
X5482 @3.2Ghz 8Gb Ram
Quadro FX1700
View 9 Replies
View Related
Aug 4, 2011
I've just switched to autocad 2012, and when I'm opening dwg files it takes up to 2-3 minutes to open and save them. Autocad 2007 opens and saves the same files in mere seconds without problems.
View 9 Replies
View Related
Jun 25, 2012
At home I have 3ds Max 2013 and at my class I am currently taking, they have 3ds Max 2012. When I tried to upload my 3ds Max 2013 file using 2012 I got; "File Load Failure (*file path*).
I now understand that I can save the file as a 2012 (from the 2013 version) but is there anyway to convert the file while at the class? I will not have access to my 2013 file for a while, and this file is homework..
View 8 Replies
View Related
May 3, 2011
I was working on setup up several camera animations in a file. I saved the file, and put the settings in for all 4 cameras to render. I started Batch Render running, it saved, began rendering the first frame and then Maya crashed. It was able to save a .mb version as it was closing. I have since been unable to get either file to open correctly.
If I try to directly open the files, they load 100%, the status bar immediately switches to "Writing <username>.20110503.<time>.ma" and the Crash Reporter appears before the viewport can even update and show the model.
If I try importing either file into a new document, it will load completely, and a dialog window pops up with: Could not save file"/var/folders/FL/FLo7J2o4H4OV9SDiREDU4U+++TI/-Tmp-/thompirson.20110503.1216.ma".
If you click OK, Maya crashes without the Crash Reporter opening.
View 4 Replies
View Related
Sep 4, 2012
i managed to download and install autodesk inventor 2013, licensing is ok, i can start the program and look at some tutorial videos, but as soon as i try to draw anything the program freezes and my whole computer seizes, i tried to install the update but program still freezes, what can be the reason for this?
my computer is in the lower range performance wise, intel core 2 duo processor(1.83GHz) 3GB DDR2 ram but autocad 2010 ran fine on the same computer
View 3 Replies
View Related
Jun 1, 2012
Having problem with a particular file crash/freeze/not respond whenever using the shell feature on Inventor LT 2013? I am operating with Windows 7. I have the AutoCAD Inventor LT 2013 Suite. Just bought the computer two weeks ago and just installed Inventor about two weeks ago also.
In any case, it seems the file of this model is corrupted, as I have never had a problem using the Shell feature before this and shelling other objects even while the corrupted part is open works fine. However, if the "visibilty" of the part in question is checked and i click on the shell button, the program immediately freezes. I am not sure how to work around this and I really do not want to start the entire part modeling over from scratch.
Working with... Autodesk: AutoCAD Inventor LT Suite 2013 | OS: Windows 7 | GC: ATI 6670 | Mem: 8 gigs RAM | Proc: Intel core i5 | Monitor: Acer V213HL
View 9 Replies
View Related
Feb 24, 2012
In the engineering notebook, I have sectioned the assembly so that I can show what I need to note. I would like to freeze the view. When I freeze the view, the section goes away and I cant see what I need to.
View 4 Replies
View Related
Mar 6, 2012
I'm using LT 2011, and have made the following macros to move a piece of text onto the same Y value as another piece of text, but keep the X value as is:
^C^C_move;;.x;0;_ins;
^C^C_change;;.x;0;_ins;;;;;
The first macro works fine but the second brings up the message 'Point or option keyword required'.
View 1 Replies
View Related
Jan 31, 2014
All of a sudden, my action macros aren't working. I'm getting "Unknown command" errors. I've checked my options, everything's pointing to the right folder, and the macro files are in the right folder. Why would I be getting this error?
View 4 Replies
View Related
Jan 11, 2012
Something strange happened recently where in order for my Right-Click Menu commands to work properly, and the double click ddedit to work, I had to take the "^C^C" out of the macro. All my related variables are set correctly, PICKFIRST, DBLCLKEDIT, etc...
What is happening is, I would get a selection set, right-click, copy with base point. Normally because the selection set is there, once a base point is selected, the command ends. In this case, after specifying the basepoint, I am asked to select objects again... This goes for ALL right click menu commands. Command line input is NOT affected.
View 5 Replies
View Related
Apr 17, 2012
Toolbar macros I've been using for several versions now are not working in LT 2013?
Here an example of one of the macros:
^C^C_select;_auto;\_copy;_p;;@;@;_move;_p;;\_rotate;_p;;@;\_redraw:
View 4 Replies
View Related
