AutoCAD Inventor :: Computer Freeze When Trying To Draw Something?
Sep 4, 2012
i managed to download and install autodesk inventor 2013, licensing is ok, i can start the program and look at some tutorial videos, but as soon as i try to draw anything the program freezes and my whole computer seizes, i tried to install the update but program still freezes, what can be the reason for this?
my computer is in the lower range performance wise, intel core 2 duo processor(1.83GHz) 3GB DDR2 ram but autocad 2010 ran fine on the same computer
View 3 Replies
ADVERTISEMENT
Aug 26, 2004
After a limited time on Photoshop my computer completely freezes.
View 9 Replies
View Related
Oct 26, 2010
I have a few problems with my autoCAD 2010 version on my new computer.When I make a few hatches, there is a possibility that my entire computer freezes and the only way out is a hard shut down of my computer.
The same problem also appeared when I tried to open a drawing direct in autoCAD or when I search the file to make an exref into the drawing.
View 7 Replies
View Related
May 27, 2013
I recently installed CS 6 on my Mac (OS X 10.8.3). When I try to save a file in CS 6, my computer freezes.
View 1 Replies
View Related
Oct 16, 2012
Working with inventor pro 2012, whenever I try to run a macro, the program freezes. It happens when I press the tools/macros buttonand it can take 30 sec or more before the macros dialog release and active or I can try to run windows job list which seems to release the jam too.It also happens when I try to run my macro with shortcut key or customized button. It freezes before the macro even loads. If I open the macros editor and run the macro from there (run sub) then there is no delay at all!
Autodesk Inventor 2012 SP1 64-bit, win 7
View 1 Replies
View Related
Oct 16, 2012
Working with inventor pro 2012, whenever I try to run a macro, the program freezes. It happens when I press the tools/macros button and it can take 30 sec or more before the macros dialog release and active or I can try to run windows job list which seems to release the jam too. It also happens when I try to run my macro with shortcut key or customized button. It freezes before the macro even loads and it is very frustrating. If I open the macros editor and run the macro from there (run sub) then there is no delay at all!
Autodesk Inventor 2012 SP1 64-bit, win 7
View 9 Replies
View Related
Dec 2, 2011
I just got a new computer and installed Product Design Suite Ultimate x64. Every time I close Inventor, the window immediately stops responding, then will only go away if I stop the process. If I click "End Task" in the Task Manager, it will start to look for a solution to the problem, then immediately close. No error report displays. All other programs work with no issue. All of the settings are default as installed.
So far I have tried:
-Reinstalling with and without SP1
-Installing the latest Autodesk Certified graphics driver
-Using software graphics
-Running as Admin
-Launching in Vista and 2008 Compatibility Modes
Computer:
Lenovo S20
Xeon W3565 3.2GHz
Windows 7 x64
12GB ECC DDR3 PC3-10600
Quadro 4000
View 2 Replies
View Related
Jun 1, 2012
Having problem with a particular file crash/freeze/not respond whenever using the shell feature on Inventor LT 2013? I am operating with Windows 7. I have the AutoCAD Inventor LT 2013 Suite. Just bought the computer two weeks ago and just installed Inventor about two weeks ago also.
In any case, it seems the file of this model is corrupted, as I have never had a problem using the Shell feature before this and shelling other objects even while the corrupted part is open works fine. However, if the "visibilty" of the part in question is checked and i click on the shell button, the program immediately freezes. I am not sure how to work around this and I really do not want to start the entire part modeling over from scratch.
Working with... Autodesk: AutoCAD Inventor LT Suite 2013 | OS: Windows 7 | GC: ATI 6670 | Mem: 8 gigs RAM | Proc: Intel core i5 | Monitor: Acer V213HL
View 9 Replies
View Related
Feb 24, 2012
In the engineering notebook, I have sectioned the assembly so that I can show what I need to note. I would like to freeze the view. When I freeze the view, the section goes away and I cant see what I need to.
View 4 Replies
View Related
Jan 2, 2013
Ist it o.k. or recommneded to have both the 2012 and 2013 versions of AutoDesk Product Design Suite - Premium installed on the same computer? Our design engineers would like this so they can learn the new version while still using the old version, but I'm concerned about the two versions conflicting with each other on the same PC.
View 2 Replies
View Related
Jun 23, 2011
I just became a part of the Student Community here, and downloaded Inventor Pro. I actually had some problems right off the bat: some kb971153 file was missing, so I had to find a hotfix from MS and install it before it would let me install Inventor.
Anyway, I opened up Inventor, and found that within seconds of loading up a new .ipt file, my computer would freeze. I can confirm that ctrl+alt+del, mashing several other buttons in frustration, and thinking of creative ways to use four-letter words to describe the situation don't work. As far as I can tell, .dwg files work just fine, it's just the .ipt ones that are kick my blood pressure up a notch.
If I remember correctly, the hotfix had to do with individual licensing or something, so it shouldn't be the cause right? Everything else on the computer works just fine; if I downloaded the wrong fix or something, I figure I'd see some problems with the computer overall. So I'm lost. Maybe it has to do with the stuff the .ipt file is trying to load or access but, either way, it's causing me to have to turn my computer via power button, something I'd rather avoid.
View 9 Replies
View Related
Oct 27, 2011
My computer freezes when I create a mate in any assembly, at the first attempt to create a mate, I select both faces, and just when I click to make the mate, the part moves, and after the part moves, my computer just freezes, totally, nothing to du but turn it off by forcing it with the power button, this happend with Inventor 2011 and now with Inventor 2012 student version.
I have an ASUS Notebook G73jh Series with ATI Mobility Radeon HD 5870 1GB GDDR5 graphics card
View 4 Replies
View Related
Jan 7, 2013
If Inventor is on the screen when the pc locks (win+L) Inventor will not display properly after unocking the pc. Moving the mouse around will change what is highlighted in the feature tree and things like that, but I cannot at all see the actual object I am working on. Changing from one open component to another does not work. I have to restart each time this happens. I have updated both Inventor and my display drivers to a supported version.
View 7 Replies
View Related
Jan 6, 2012
I am using Ilogic to complete details in the drawing iproperties to use in a drawing border.
I can successfully enter the creation date with the line:- iProperties.Value("Project", "Creation Date") = Now
But is there a way of doing the same so that the iProperties.Value("Summary", "Author") = computer user ?
View 2 Replies
View Related
Aug 5, 2012
How can i draw a SPRING around a circle ? like Attachment picture. (not in the Sketch) in the Part Modeling.
View 1 Replies
View Related
Jul 30, 2012
How can i Draw a SPRING around a circle ?
View 3 Replies
View Related
Sep 30, 2013
How to add in revision clouds in Inventor 2014? I want to draw in drwaings revision clouds.
View 9 Replies
View Related
Feb 19, 2013
I have to rebuild 3d geometry from existing *.pdf drawings. What would be the best way to proceed?
I thought an option would be to import the *.pdf in a kind of layer, rescale it and sketch on top of it.
However the pdf importation fails. How to import a *.pdf in sketch mode?
View 2 Replies
View Related
Jun 19, 2013
how to draw chair frame like this?what feature should I deal with it.
View 8 Replies
View Related
Nov 7, 2013
how to draw this groove from blueprint .
View 9 Replies
View Related
Mar 15, 2014
I started a new computer with LR5, and it runs fine. But, when I imported my pics from a previous computer running LR4, all the pics loaded into the new LR without any tags or processing. How can I get that info without having ot reprocess thousands of pictures?
View 1 Replies
View Related
Jul 5, 2012
I need to draw a cylindrical cam in Inventor Professional 2013. I tried using the cam module but it is not what I need. My cam can be generated by a third-degree polynomial. You could use the new "curve from equation"?
View 1 Replies
View Related
May 24, 2012
How do I draw ribs on a curved surface. Attached is model that I am working on and I need to create ribs on the curved surface in radial direction. How do I do it?
View 8 Replies
View Related
Sep 28, 2012
I am trying to draw a bevel gears from drawings, one is a scroll plate and the others are gears with a key hole. As you can see in the following attachment.
My question is how do you draw bevel gears on the face of the scroll plate and the cylindrical face of the other 3 gears?
View 4 Replies
View Related
Jun 11, 2012
How would you draw a spiral garden hose? If you don't know what i mean by spiral garden hose Google it. How would you draw the hose.
And would it be possible to make it flexible?
View 9 Replies
View Related
Feb 17, 2012
more than one closed shape on the same plane.
View 9 Replies
View Related
Jan 9, 2013
I have been doing the design and shop drawings for lattice structures using AutoCad in 2D. It works fine but there are a few problems where parts collide in final assembly. My client suggests Inventor as he thinks it iwll be faster (and thus cheaper) and it would also automatically make shop drawings of each piece.
While I have no doubt it is possible to design and draw a lattice structure in Inventor, would it be efficient or would it be a waste of time compared to another program. Would 2D AutoCad be more efficient?
View 6 Replies
View Related
Oct 28, 2013
I have CS5 installed on a desktop computer that crashed and I can't get it working to deactivate CS5. I am going to purchase a new desktop and would like to install CS5 on the new computer, but it was already installed on two computers (desktop and laptop) so no activations are left. I have the Disk and serial number.
View 1 Replies
View Related
Apr 21, 2011
Im using the bolted connection tool and when i chose all of circluar reference and pick out my bolt and nut the tool will only draw one bolt and ignore all the other circular references. It previews all the bolts just fine ut will only place a bolt in one of the circular references.
View 7 Replies
View Related
Sep 5, 2013
How to draw this junction on the Shet metal Elbow that i have create, i am sending what i have made so far and the 2d of what i need. My version of the Inventor is 2013.
View 4 Replies
View Related
Nov 19, 2013
Now I am trying to draw 2 hemisphere structures which have a hall and a pillar (bumo) like in the appended file.
Even though I used 2 rectangular parallelepiped in that, I like to use hemisphere.
1) How can I divide a sphere into two parts?
2) How can I make them aprat to make a hall and a pillar? I like to know how I can control them separately after separation.
3) Is there other way except 1) and 2) to make my model?
4) Is there a way to make one hemisphere? I think that I can use "draw sphere -> make workplane at the center of the sphere -> extrude cut half of the sphere".
View 4 Replies
View Related
