AutoCAD Inventor :: More Than One Version Installed On The Same Computer?
Jan 2, 2013
Ist it o.k. or recommneded to have both the 2012 and 2013 versions of AutoDesk Product Design Suite - Premium installed on the same computer? Our design engineers would like this so they can learn the new version while still using the old version, but I'm concerned about the two versions conflicting with each other on the same PC.
I`ve just installed Inventor student and I can`t use it at all since I can not see anything in the main screen! I`ve installed, reinstalled and nothing
I`ve attached two screen shots - hovering over the main screen I get the options and data showing like the correct thing is happening - just nothing visible!
I am running ACAD 2012 & Civil3d 2012 and would like to install ACAD 2014 to start playing around with the software. Are there issues with running both versions on the same computer?
Can a 32 bit version of AutoCAD 2012 be installed on a 64 bit machine with windows 7 and a 64 bit version of AutoCAD 2012 on it? It is a network machine.
I just installed Photoshop CC and Lightroom 5 CC onto my computer. Lightroom had no problems getting set up and is ready to go. I had an old demo version of Photoshop CS6 on my computer and was told to delete it, which I did. Unfortunately, it also damaged Photoshop 6 CC and I had to unistall it also. Now CC is saying it is up to date and won't reinstall it. I really need to start working on something I promised I would have ready by Monday and can't do it because I don't have Photoshop again.
I've installed PS6 on my computer and it simply won't open. I get an error message that says it needs to close. I've reinstalled, ran a virus scan and tried to take my computer back to an earlier time....nothing.
I have numerous Hebrew fonts installed in my computer which can be used in all other programs by changing the language icon at the bottom of my screen. How can the same fonts be used in corel draw?
I have a new computer with 2012 Autocad LT. My settings are from 2010 Autocad LT. I can only figure out how to import my settings if they are from my current system or migrate my settings if I have an old version of Autocad installed on my computer which I don't. How do I get my 2010 settings into my 2012 autocad LT on my new computer?
I would like to determine if the installed version is CS4 or higher using the Windows Registry.I currently have Photoshop CS4 and CS6 installed on my computer. They appears as follow in the registry:
I have tried so many times to remove Photoshop cs6 pre-release, but without any success.
I have downloaded Photoshop cs6 extended from this link:
[URL].........
I put it in the bin first and emptied the bin when actually I shouldn't have done so. So I tried the cleaner
[URL]........
I've put first to remove cs5 , cs5.5 and cs6. then I did it again with cs6 alone. I've restarted my computer. Still doesn't work, I always get the message:
"A conflicting or prerelease version of adobe Photoshop exists on this computer (...) "
I have searched previous similar topics about the same problem, no success.
I am using Photoshop Elements 11, using WIndows 7 Operating System. I have a new camera Canon Rebel T5i, and having problem viewing images in raw format (cr2).Message in PE11, states, "Camera model not supported by installed version of Camera raw."
Canon software views images. Suspect my minimum camera raw plug in version does not support this new camera..I am unable to locate in the software any menu item that allows me to view the camera raw plug in version.
I had IT install our network version of IV 2012. That seemed to install flawlessly. I still have IV 2011 on my machine IV 2011 and will be running it for the time being.
My problem is when I try to get the iProperties I get this error. "Plugin not available or not properly installed. Notify the System Administrator that the installation is incomplete. DTCP"
We tried to repair/reinstall 2011 and then removed it and reinstalled, to no avail. I have not tried 2012 yet, as all our files need to be migrated to 2012.
I am using inventor 2012 and am trying to import my MDT(2002) drawings but when I try the translation process I receive an error message that says Mechanical Desktop must be installed. I currently of both Inventor and MDT installed and both operate correctly.
I am working with inventor 2014 professional now. But There is a problem. it is ( a: 2d translator not installed and b:sketch export failed ) . dxf drawings of sheet metal environment, particularly these problems started recording format.
i managed to download and install autodesk inventor 2013, licensing is ok, i can start the program and look at some tutorial videos, but as soon as i try to draw anything the program freezes and my whole computer seizes, i tried to install the update but program still freezes, what can be the reason for this?
my computer is in the lower range performance wise, intel core 2 duo processor(1.83GHz) 3GB DDR2 ram but autocad 2010 ran fine on the same computer
I just became a part of the Student Community here, and downloaded Inventor Pro. I actually had some problems right off the bat: some kb971153 file was missing, so I had to find a hotfix from MS and install it before it would let me install Inventor.
Anyway, I opened up Inventor, and found that within seconds of loading up a new .ipt file, my computer would freeze. I can confirm that ctrl+alt+del, mashing several other buttons in frustration, and thinking of creative ways to use four-letter words to describe the situation don't work. As far as I can tell, .dwg files work just fine, it's just the .ipt ones that are kick my blood pressure up a notch.
If I remember correctly, the hotfix had to do with individual licensing or something, so it shouldn't be the cause right? Everything else on the computer works just fine; if I downloaded the wrong fix or something, I figure I'd see some problems with the computer overall. So I'm lost. Maybe it has to do with the stuff the .ipt file is trying to load or access but, either way, it's causing me to have to turn my computer via power button, something I'd rather avoid.
My computer freezes when I create a mate in any assembly, at the first attempt to create a mate, I select both faces, and just when I click to make the mate, the part moves, and after the part moves, my computer just freezes, totally, nothing to du but turn it off by forcing it with the power button, this happend with Inventor 2011 and now with Inventor 2012 student version.
I have an ASUS Notebook G73jh Series with ATI Mobility Radeon HD 5870 1GB GDDR5 graphics card