Downloaded X4 upgrade. When trying to install it fails with the message "The installed version of the application could not be determined".
View 10 RepliesI tried to download this SP but got a message "The installed version of the application could not be determined. The set up will now terminate"
View 2 Replies View RelatedI bought Video Studio X5 about 6 months ago,Installed it, tried the feature I was interested (Video capture) and it failed. As I really didn't have the time to look deeper into that, I just put it on the side for later. I knew I would need it at a later timeNow, I need it.Of course, it didn't repair itself and failed again (When I launch vid capture it give me the now classic "prepare record failed #15" message and will not record).
Checked the website, there is one update, a service Pack 1. It fails to install "The version of the installation could not be determined"
cs6 upgrade is installed, do I need to keep CS4 installed?
View 7 Replies View RelatedI downloaded and paid for the upgrade version of CorelDraw X6 because I have X3,X4 and X5. I have installed it already but I went to reinstall on my desktop PC as I wiped my hard drive back to factory state, CorelDRAW no longer gives the upgrade option.
On start up it gives the following message ( see below ) as a 30 day trial.
I have located a person who bought a CS3 upgrade, not realizing it was an upgrade. He has said the store would not take it back because he had tried to install it. He now wants to sell it so he can use the money to put towards the full version.
If he tried to install the upgrade, is it registered during that process, even if he had to stop at the point Adobe asked for proof of a previous version?
I just /L'd the CS4 Extended and installed. when I try to run it I get the screen that asks if I have a serial or want a trial. I have now tried the serial 8 times (each time getting the green check mark) and tried the trial option as well. As soon as I hit "ok" nothing happens. All of the other programs that came with it, like Bridge, all fire up no problem. Vista Ultimate Sooper Dooper or whatever the top one is, 32 bit4 G RamNVIDIA CardMega ton of disk space.
View 5 Replies View RelatedAfter downloading I got a message that CS6 was installed but don't see it on my desktop and my copy CS5 still says it is "5". What can I do?
View 2 Replies View RelatedI have LR 3 and I would like to upgrade to LR 4. Can I install the upgrade to LR 4 and still keep my LR 3 installation intact so that I can switch back and forth between the two versions if I want to?
View 2 Replies View RelatedI am trying to upgrade from CS3 to CS4 in a Windows VISTA environment and the installation of Bridge and CS4 fails. The message is:
Adobe CMaps CS4
Error:
Error 1603. Error 1714.The older version of Adobe CMaps CS4 cannot be removed. Contact your technical support group.
It's probably really simple but I can't find how to email Customer Support.
i get the green progress bar.. then suddenly a error message "can not install application manager".of course no further explanation... tried a few times.we use CS6 with a volume license at work.
View 7 Replies View RelatedI've photoshop CS5 and I've bought the upgrade to CS6...I'm trying to install it, but in the installation it says that I don't have a valid software installed, is this a bug or I'm doing something wrong?
View 3 Replies View RelatedI was advised to download photoshop via adobe application manager as I have an XP OS. I even downloaded the application manager but now it fails to install saying "remote server not properly placed.Try after a few minutes" Whenever I retry I get the same message. Even I am getting the same message in case of installing adobe flash player. The installer always says installation not complete.
View 1 Replies View RelatedInstalled lightroom 4.4. Crashes every time I try to upgrade my PE11 catalog.
View 3 Replies View RelatedAdobe Bridge (CS6) Stopped Working & Application Manager Fails No Matter What I do.
Â
I have uninsalled, ran the cleaner, installed, and Bridge will not open, Application manager will not run.
Â
Win 7 x64 Pro
CS6
I have upgraded to Lightroom 5.3. After uploading the software, when I attempt to open the program, I get the message: "The application was unable to open correctly (0xc000007b). Click OK to close the application. I have not been able to contact Adobe for support.
View 2 Replies View RelatedIst it o.k. or recommneded to have both the 2012 and 2013 versions of AutoDesk Product Design Suite - Premium installed on the same computer? Our design engineers would like this so they can learn the new version while still using the old version, but I'm concerned about the two versions conflicting with each other on the same PC.
View 2 Replies View RelatedCan a 32 bit version of AutoCAD 2012 be installed on a 64 bit machine with windows 7 and a 64 bit version of AutoCAD 2012 on it? It is a network machine.
View 4 Replies View RelatedI need to identify the Adobe Photoshop CS4 Trial installation to that of fully purchased/licensed installation, only using files/registry entries.
View 2 Replies View RelatedI would like to determine if the installed version is CS4 or higher using the Windows Registry.I currently have Photoshop CS4 and CS6 installed on my computer. They appears as follow in the registry:
[Photoshop CS4] HKEY_LOCAL_MACHINE/SOFTWARE/Adobe/Photoshop/11.0[Photoshop CS6] HKEY_ LOCAL_ MACHINE/ SOFTWARE/ Adobe/ Photoshop/60.0Â
Does the folder "number" (50.0?) used for Photoshop 5?Also, for example, is it always 60.0 for Photoshop CS6? Even when an update has been installed?
Just installed version 11 of PhotoShop Elements. In trying to convert the Version 10 Catalog to Version 11, the conversion fails. I have repaired and optimized the Catalog with Version 10, but still no luck with the conversion. A
View 12 Replies View RelatedI have a Visual Basic 6.0 Project , to manage CAD Data I want to open a file in Autocad
1) in VB6 , I add Project / Reference / Autocad 2006 Type Library
2) I use following code (see below) , to select application , start Autocad if not already started , open File
3) I compile Mycode : MyCADProject.exe
=> start MyCADProject.exe , I select a DWG file and I can open the file in Autocad 2006 : OK
Problem , I have new PC one with Autocad 2010, one with Autocad 2009 (all other PC are with Autocad 2006) in My VB6 Project 1) I can not sellect both library "Autocad 2006 Type Library" and "Autocad 2007 Type Library" => I get a Windows error Message "Librairie déja utilisée" 2) If I select only one Library , this run well for one version of Autocad , but not fot the other version ! I want to manage only one version of MyCADProject.exe
Is is possible to run a VB6 project with different version of Autocad ?
Dim Acadapp As AcadApplication
On Error Resume Next
Set Acadapp = GetObject(, "AutoCAD.Application")
If Err.Number <> 0 Then
On Error GoTo 0
Set Acadapp = CreateObject("AutoCAD.Application")
End If
Acadapp.Documents.Open (Myfile)
Acadapp.Visible = True
I just got a shrinkwrap version of PS CS3 upgrade. I have a full version of PS 7 installed on my machine. Can I upgrade to this version. Adobe supports upgrades from 3 versions back, but I read somewhere that after Oct 2008, I won't be able to upgrade to CS3 - It doesn't make sense.
View 5 Replies View RelatedAfter computer crash I now have installed a new version of PS. However, all tags are missing. Is there a simple way of recapturing them?
View 5 Replies View RelatedUpgrading Photoshop cs2 to any highe available version, is it possible?
View 7 Replies View RelatedI get a different answer depending on where I ask.
if PS 5.5 Academic version is upgradable?
When installing an upgraded version of Designer or Web Designer, Xara never overwrites or uninstalls the old program like many software companies do. Is there any problems encountered with data files or anything else if you just uninstall the old program through the Control Panel (Windows)?
View 2 Replies View RelatedI have recently installed a copy of Autodesk Product Design Suite Ultimate 2013 and am having problems with assemblies in Inventor turning into educational versions. When I was at Purdue University I used the free educational version of Autodesk Inventor. I recently uninstalled Inventor, deleted the autodesk folders in program files, program data, and my documents folders.
Then I installed this professional version. Everything works great until i use something from the content center. Once a bolt is placed in the assembly the entire assembly becomes educational when I open it again.
I have upgraded from Win XP to 8.1 by buying a new machine. I have a valid copy of elements 11 on DVD. This was upgraded from elements 8 which was downloaded and those files have been lost. Windows 8.1 will not read the DVD.
Â
How can I get PSE11 onto the new machine?
I was wondering if you can upgrade to lightroom 5 from a previously upgraded version of Lightroom as I'd like to do this.
View 2 Replies View RelatedI have successfully turned off the Application Frame on my Mac version of CS6 but can not find the same functionality in my Windows version. How to turn off this feature in the Windows version?
View 2 Replies View Related