AutoCAD Inventor :: Plugin Not Available Or Not Properly Installed
Dec 19, 2011
I had IT install our network version of IV 2012. That seemed to install flawlessly. I still have IV 2011 on my machine IV 2011 and will be running it for the time being.
My problem is when I try to get the iProperties I get this error. "Plugin not available or not properly installed. Notify the System Administrator that the installation is incomplete. DTCP"
We tried to repair/reinstall 2011 and then removed it and reinstalled, to no avail. I have not tried 2012 yet, as all our files need to be migrated to 2012.
View 7 Replies
ADVERTISEMENT
Mar 25, 2013
So I just started at a new firm and they are using datalinks for the attic vent calculations. The table is in Excel and once filled out it should populate in the drawing. My CPU was an old employee's so it isn't new installed software but my datalink button says that Excel is not installed properly and will not let me edit the datalink in Autocad. I can however open the Excel file from the reference manager just fine and it opens. I have tried hard pathing and softpathing with no luck. Other people can insert it for me which they did in one file but I want to be operating at 100% like they are.
View 3 Replies
View Related
Apr 6, 2012
I downloaded a trial of CS3 a few years ago and i'm trying to uninstall it. When I try to I get an error message that says "Setup is not properly installed. Please re-install". How can I fix this?
View 4 Replies
View Related
Mar 24, 2014
on my IMAC 10.9.1 with Mavericks. I am very disappointed with Adobe as I paid for service warranty as well ($39) and I am scheduled for another call as the third team tries.Could this be a.s.a.p or should I write CEo Shantanu Narayen and express my displeasure or blog it?
View 8 Replies
View Related
Jul 27, 2012
I downloaded and installed the Shaped Gradient Plugin from here:
[URL]
Installed in the Effects folder as per usual.
When I restarted PDN (several times) and I just can't seem to find where the plugin is. I have been through the Effects and submenus with a fine tooth comb each time but it's not there....
Using Paint.NET v3.5.10 (Final Release build 3.510.4297.28964)
View 11 Replies
View Related
Mar 24, 2011
I have installed the PSD Plugin for opening Photoshop files in Paint.NET
But still Paint.NET won't recognize the PSD file type
I simply still do not get the option to open this kind of file!
I have tried to force the files to open with "Open with" but Paint.NET answers with a prompt: "The image type can not be recognized".
I running Paint.NET on Windows 7.
View 2 Replies
View Related
Dec 12, 2012
I got calls from 3 of the DRAW users that some of the fonts are not displaying correctly since they have updated their Windows today. I have not yet connected my laptop to internet. Shall check it and try to identify the culprit update.Few fonts known for not displaying correctly since today.
View 24 Replies
View Related
Mar 3, 2013
I just wrote a very specific python plugin for someone who uses Gimp on OSX. The plugin doesn't appear in her menus so the installation may not be correct.
1) are there accurate instructions to install python plugins somewhere (preferably in the user's Gimp profile)? Is there a need to set some "executable" flag on the file (and if so how)?
2) in case the plugin doesn't register properly due to some syntax error, is there a way to check that out? On Linux one would start Gimp form a terminal, on Windows I believe gimp-console does it, but hat is the equivalent on OSX?
3) can some knowledgeable OSX user test that my plugin works correctly (PM me a mail address where I can send the plugin)
View 1 Replies
View Related
Jan 2, 2013
Ist it o.k. or recommneded to have both the 2012 and 2013 versions of AutoDesk Product Design Suite - Premium installed on the same computer? Our design engineers would like this so they can learn the new version while still using the old version, but I'm concerned about the two versions conflicting with each other on the same PC.
View 2 Replies
View Related
Jun 29, 2012
How do I know what Hotfixes are installed in R2013?
View 1 Replies
View Related
May 1, 2013
I am using inventor 2012 and am trying to import my MDT(2002) drawings but when I try the translation process I receive an error message that says Mechanical Desktop must be installed. I currently of both Inventor and MDT installed and both operate correctly.
View 4 Replies
View Related
Feb 19, 2013
Can I add more Image based lighting images besides the one come installed such as (old warehouse, dry salt bed)?
If yes how could i do it
View 3 Replies
View Related
Jul 9, 2013
Can Mechanical Desktop 2009 be installed with Inventor 2013?
View 5 Replies
View Related
Aug 28, 2013
I am working with inventor 2014 professional now. But There is a problem. it is ( a: 2d translator not installed and b:sketch export failed ) . dxf drawings of sheet metal environment, particularly these problems started recording format.
View 3 Replies
View Related
Mar 27, 2013
INV Routed Systems 2011 sp2
I needed a specific Adobe font engraved on a nameplate.
I purchased and installed the font and it is available to me in other applications.
I went to use it within my sketch and it didn't display as being available.
Do I need to do something other than install the font on my machine to use it within my model?
Inventor Product Design Suite 2013sp2
Windows 7sp1 64-bit
nVidia Quadro 2000
View 7 Replies
View Related
Sep 15, 2013
I`ve just installed Inventor student and I can`t use it at all since I can not see anything in the main screen! I`ve installed, reinstalled and nothing
I`ve attached two screen shots - hovering over the main screen I get the options and data showing like the correct thing is happening - just nothing visible!
View 1 Replies
View Related
Nov 23, 2012
cs6 upgrade is installed, do I need to keep CS4 installed?
View 7 Replies
View Related
Jun 10, 2013
Essentially, I am attempting to create something similar to this: [URL] .....
But cannot get enough twisting action. I just need to know how to twist an object properly. For example, what I have done is created a two sketches of hexagons on offset planes, and lofted between the two sketches. If I rotate one hexagon sketch slightly, it will result in a twisting effect. However, if I want to get any significant amount of twisting, rotating the sketch does not work. I have tried with a goil, but that gets the entire object (with a sweep, in this case) to spiral.
View 9 Replies
View Related
Sep 16, 2013
I have the student version of Inventor 2014 installed on my computer. My O/S is Windows 7 Ultimate 64 bit. I have installed and reinstalled Microsoft Visual Basics three times. But, I am still getting the error "VBA failed to initialize properly".The program was working fine for about a week with no errors reported. Now, every time I try to start a tutorial I get this error.
View 5 Replies
View Related
Oct 11, 2012
I am using Inventor 2009 professional and I have to run a stress analysis on a beam. I put the constraints and the forces I need and when I hit the calculate button, the results so up, but when I click on the results, nothing appears. I need to run this calculation and do not want to resort to hand calculations.
View 9 Replies
View Related
May 7, 2012
In the attached part if I change the value of the length parameter from 19" to 20" Work Axis 1 updates to the 19" location, if I change it back from 20" to 19" it goes to the 20" position.
In the images below, the axis should be in the center of that last slot.
View 8 Replies
View Related
Jul 2, 2012
I am trying to link to parameters in sub-components of an assembly, and feed dimensions to them. When I am in my iLogic interface I browse to the the part in the assembly and click the plus sign next to the part I am interested in. I then click the "User Parameters" section under that part and find the parameter I want to change. Now the normal workflow is to double click the parameter and it shows up in your iLogic code like here in this example:
Parameter("MSS_Cabinet1_Frame:1", "Splice_Length2") = Cab1_SpliceLength2
Well when I try to do this now, I get this:
MSS_Cabinet1_Frame.iam.Splice_Length2
So obviously something got messed up in my machine and iLogic is no longer formating the code properly. It only happens on my machine here, everyone else in our department still works fine. I have also determined that it is happening on all files new and old.
My fear right now is that I may have to re-install Inventor and I do not want to have to do that. I do have a call in with tech support through my local reseller, but who knows how long that will take.
View 8 Replies
View Related
Jan 10, 2014
I am working on creating a male mold for a canoe. I first designed the cross sections for the canoe and then began converting them to the mold cross sections. When I try to loft the cross sections I have converted so far, they all loft as I intended until I get to the rear of the canoe (sketch 8). The issue typically arises in gunwale section (the part that appears to be a notch in the sides). Everytime I loft, one of the gunwales splits/twists in an undesired fashion (in the image below the right gunwale is incorrectly twisted).
I do not understand why this is happening for a few reason:
1. The canoe cross sections lofted as planned, and I only added simple boxy shapes to those cross sections.
2. Each cross section is symmetrical (or at least from what I can tell they are).
3. The cross sections that are lofting improperly all have the same number of segments and are in very similar shapes.
I have attached the file of the cross sections and another file of an improper loft.
View 3 Replies
View Related
Nov 12, 2013
I have created a SketchLine entity and trying to add aligned dimension by calling DimensionConstraints::AddTwoPointDistance(). It adds the dimension with inside arrowhead (see attached CurrentWorking.jpg), however, it would be nice if the dimension is added with outside arrowhead (see attached Expected.jpg).
if there is any API to toggle the dimension arrowhead accordingly.
View 2 Replies
View Related
Jul 18, 2012
I am having to model a spiral slide in sections, and the top piece has this weird angled lip where the opening distorts. Im simply trying to take the face of the extruded part (in three sections) and loft it to the sketch on a different plane. And use the sketched curve as the centerline.
View 5 Replies
View Related
Nov 7, 2012
I'm having problems with the crop feature in an Inventor idw. Having cropped my view I then go into the browser to edit the crop (edit sketch), the lines on the crop window will not move and I am unable to edit the selection, why is this not working ? Occasionaly I can move / resize one or two of the crop boundry lines but never all of them.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 3 Replies
View Related
May 11, 2013
I have an assignment in school in which we are going to calculate the number of needed rivets and their dimensions to join two pieces of aluminum with the dimensions 5x50x200mm together.
I've created the sheet metal and imported two of them into an assembly along with 8 rivets from the content center with the appropiete dimensions. In comes my problem. I planned on running a stress analysis and pasting the pictures of the results in my report. However, I have a feeling that the stress analysis tool isn't working as it should.
No matter what force I'm applying to the sheet metals, and no matter what material I assign to the different parts, including the rivets, the results, the deformation and force applied to the rivets, are roughly the same.
I've applied a force of 12700N to the two short sides of the sheet metals:
The two sheet metals are also fixed on the opposite side of the forces:
[URL]
View 1 Replies
View Related
Jan 7, 2013
If Inventor is on the screen when the pc locks (win+L) Inventor will not display properly after unocking the pc. Moving the mouse around will change what is highlighted in the feature tree and things like that, but I cannot at all see the actual object I am working on. Changing from one open component to another does not work. I have to restart each time this happens. I have updated both Inventor and my display drivers to a supported version.
View 7 Replies
View Related
Jun 13, 2008
how do you get the scale to show up properly in the title block? I've been searching and finding nothing on this issue, with exception of Autodesk personnel telling users to use the scale display on the views. I know it's not the "Autodesk way" of doing things, but my company has been putting the main view scale in the title block for over 30 years.
I've been using Patrick de Stobbeleir's "iProperty Collection" utility since Inv11, and it does the job. The thing that bugs me, though, is that I can't figure out how to get the FirstViewScale:x custom properties to work intelligently in my title blocks. I just use the property FirstViewScale in my title block, which displays the scale of the first view put down...no matter what the sheet.
how I can use the FirstViewScale:x property in title blocks such that x is the sheet number? So far we just have the first sheet use the FirstViewScale, and then subsequent sheets use a prompted entry (I know it's an ugly work-around).
View 9 Replies
View Related
Dec 20, 2012
I was working with ilogic, Adding a new rule and all of a sudden I got an error and when I double click on a parameter to add it to the code, the format changed.
It used to look like this when I added a parameter: Parameter("vertical seperation:1", "partitionthickness")
but now when I double click on a parameter I get this: vertical seperation.ipt.partitionthickness
Also when I right click on a parameter and select display current state, It does the same thing, for some reason the code does not display like it used to.
I got an error when this first happened and I tried reproduce the error again but it did not appear again. This affected all my parts and even in different projects.
I re installed inventor because I thought there might be a file link broken but it did not fix it.
View 4 Replies
View Related
Dec 14, 2013
When I paste an item in the assembly, the item is thrown off in space. It places it so far away that it is not even in the view window. I have to stop what I doing, do a find in window and then drag it close to where I need it. Then I can start constraining it.
Why does it not place the item at my coursor location like it used to?
I am using SP1.
View 7 Replies
View Related
