AutoCAD Inventor :: Add More Image Based Lighting Images Besides The One Come Installed
Feb 19, 2013Can I add more Image based lighting images besides the one come installed such as (old warehouse, dry salt bed)?
If yes how could i do it
ADVERTISEMENT
AutoCAD Inventor :: IBL Image Based Lighting Scene Backgrounds Not Appearing
Jun 10, 2012when I am trying to use the lighting style scenes (such as old warehouse) I get this message "Cannot find the source Oldwarehouse of the image based lighting" and the background image does not appear I only get the same old gradient backgroud. (see attached file)
I know the IBL files exist and know where they are but I have moved the folders from the default location on my C: drive due to space reasons and changed the respective filepaths in the application options. However it seems inventor has not understood that the path to these IBL background files has changed... is there some filepath setting somewhere that I have missed?
I am using inventor 2013.
Photoshop :: Scale Image Based Lighting?
Sep 24, 2013So I'm working in 3D again in CS6 and find myself wishing to "scale down" my image based lighting to give greater detail to my reflections. It seems like all I get with IBL is very large and blurry reflections. sharpen up and focus my IBL?
View 1 Replies View RelatedAutoCAD Inventor :: Installed Student Version - No Main Screen / Part Images Showing
Sep 15, 2013I`ve just installed Inventor student and I can`t use it at all since I can not see anything in the main screen! I`ve installed, reinstalled and nothing
I`ve attached two screen shots - hovering over the main screen I get the options and data showing like the correct thing is happening - just nothing visible!
Photoshop :: Problems Previewing Images Now I've Installed CS3
May 5, 2007i've just installed CS3 and when i right click on an image in a folder and go to 'preview' it opens up photoshop. it should just display the image like it did when i had CS. anyone else had this problem? know a solution? if there is none, does anyone know a good piece of preview software i could use instead?
View 1 Replies View RelatedIllustrator :: CS6 - Any Way To Create Layers Based On Image Colour After Using Image Trace?
Sep 23, 2012Illustrator cs6 - I have used image trace to create a 3 colour image of a photograph. Is there a way to create layers based on the three colours? (One layer for each of the three colours)
View 2 Replies View Related3ds Max :: Rendering Cube Based Images
Apr 23, 2011I was just wondering, would it be possible to make 6 images of an environment I made in 3Ds max that would represent front, back, top, bottom, left and right sides of where my camera is positioned?
I would need the lens angle to be 90 degrees so that every image would connect with each other.
I'm pretty sure I could do this, but I never really adjusted the lens angle and I can't access my own computer at the moment. So I'm asking here!
The whole purpose for it is to make an area I can look around in, as my dad is doing this with photo's, using a little program to convert 6 images to one spherical environment. We were discussing it and came to the idea of making something similar to what he does with photo's, but instead of using photo's using a scene made in 3Ds max.
Photoshop :: Matching Lighting From Two Different Images?
Oct 4, 2013I want to use Refine Edge to move a person from one image to another. That part I can do, however, once the person is placed into the new environment, I want to adjust the person so he looks like he actualy belongs in that image. I want to adjust the lighting, shadows, etc. Is the Levels Tool the best tool for matching lighting?
View 3 Replies View RelatedPhotoshop :: Matching Lighting Of 2 Different Images
Jun 16, 2006How would I go about matching these images, i would like the two on the left to look similar to the two on the right (so I can cut out the images on the left and place them in the photo on the right).
I have had a tinker around with the lighting effects but the pictures still look quite different.
AutoCAD .NET :: Read Image Name From ImageList Based On Index Value
Aug 4, 2011I am using ImageList to store a group of images.
I would like to read the image name from the imagelist based on index value.
Lightroom :: Function To Sort Images Based On GPS Position
Oct 12, 2012I would need a function to sort images based on GPS position, north to south or vest to east. Is that possible or an function that will come in the future.
View 1 Replies View RelatedPaint.NET :: Controlling For Different Lighting In Two Medical Images Of Same Subject
Feb 23, 2012How to use existing PainNet program or plugin features to solve the following problem? Sometimes in publishing of medical research, we need to show the changes in a patient's appearance over time. Inevitably, the two photos will be in different lighting. For example, the current photo may be in the flourescent light of a hospital while the older photo may be in the incandescent light of a patient's home.
I have tried a method to identify the darkest pixel in a feature common to both pictures (for example, eyebrows) with the following results:
New photo: R:48 G:34 B:30
Old photo: R:45 G:43 B:40
So, how should I adjust the old photo? Simply add either the relative or absolute difference between the channels above to the entire photo? Is there a plugin that supports this? I looked at ColorMatch and ScriptLab, but did not see a solution.
Photoshop :: CS6 / Slice Tool - Creating 3 New Images Based On Slices
Nov 21, 2013I have never used the slice tool. Well i load an image jpb
I select the slice tool and i create 3 slice box. How can i cut , trim in short have 3 image of these 3 slices?
In short i want to grab from image 3 sices and create 3 new images ,based on my slices. Can i do it?
GIMP :: Tile Based Images - Pasting Transparent Pixels
Mar 5, 2013I have been using Gimp for a lot of "tile based" images, which feature layers composed of several "tiles" pasted into those layers. However, I just recently started creating transparent tiles, and pasting them.
One of the strangest things I have run into here is that I don't seem to be able to move my selection ( Floating Layer? ) if the opacity on the source pixels is 0.25 or less. Specifically, I do not get the usual "drag box" when I hover over the transparent pixels. Instead, I get the "anchor box" ( which seems to crop the pasted area before anchoring ). I tried this on a composite image with some more transparent pixels ( 0.25 ) and some more opaque pixels ( 0.26 ), and the "drag box" appears only over the more opaque pixels.
Why this might be happening? It could be that this is just context-sensitive cursor behavior which varies on transparency, and if so, is there another way to move the pasted selection?
GIMP :: How To Get Images To Print Out Based On Real Life Inches
Oct 14, 2013I am completely new to gimp I have an image that is 8in x 6in. It was previously edited in Photoshop on another computer thats how I know the actual size. When I load it into gimp, the image size is in real life the same, I can take a ruler to the screen and it measures 8in x 6in at 100% zoom. However, according to gimps rulers, the image is over 11in x 7in. So I measured what is one inch on gimps ruler and it is actually 3/8in in real life. When I create a grid to overlay the image, through Filters-Render-Patterns-Grid and I make the settings to be 1in x 1in, it too shows up based on gimps ruler measurements. I have the ruler set up in inches but a gimp inch is not a real life inch, and this shows up when I scale the image to 8in x 6in it actually makes the image 5 1/2in x 3 3/4in in real life when printed out. How can I get gimp to display a real life inch and how can I get my images to print out based on real life inches.
View 3 Replies View RelatedLightroom :: Filtering Images Based On The Number Of Stars Applied?
Jul 11, 2012After applying star/ratings to images, how do you filter your images based on the number of stars you applied?
View 5 Replies View RelatedAutoCAD Inventor :: Plugin Not Available Or Not Properly Installed
Dec 19, 2011I had IT install our network version of IV 2012. That seemed to install flawlessly. I still have IV 2011 on my machine IV 2011 and will be running it for the time being.
My problem is when I try to get the iProperties I get this error. "Plugin not available or not properly installed. Notify the System Administrator that the installation is incomplete. DTCP"
We tried to repair/reinstall 2011 and then removed it and reinstalled, to no avail. I have not tried 2012 yet, as all our files need to be migrated to 2012.
AutoCAD Inventor :: More Than One Version Installed On The Same Computer?
Jan 2, 2013Ist it o.k. or recommneded to have both the 2012 and 2013 versions of AutoDesk Product Design Suite - Premium installed on the same computer? Our design engineers would like this so they can learn the new version while still using the old version, but I'm concerned about the two versions conflicting with each other on the same PC.
View 2 Replies View RelatedAutoCAD Inventor :: 2013 - How To Tell What Hotfixes Are Installed
Jun 29, 2012How do I know what Hotfixes are installed in R2013?
View 1 Replies View RelatedAutoCAD Inventor :: BOM Based On Representation
Nov 7, 2013Is there some way to do a BOM based on a representation? Also how do I get sub-assemblies to show as the individual parts?
View 2 Replies View RelatedAutoCAD Inventor :: Translation Of DWG - Mechanical Desktop Must Be Installed
May 1, 2013I am using inventor 2012 and am trying to import my MDT(2002) drawings but when I try the translation process I receive an error message that says Mechanical Desktop must be installed. I currently of both Inventor and MDT installed and both operate correctly.
View 4 Replies View RelatedPhotoshop :: Convert Pixel Based Files To Vector Based Illustrator?
Apr 23, 2012Is there a way to convert the pixel based phtoshop files to the vector based illustrator files?
View 2 Replies View RelatedAutoCAD Inventor :: Creating IDW Template Based On DWG
May 16, 2012I was trying to make new .idw (inventor) templates based on .dwg (autocad) templates. For some reason the type face Simplex is not showing correctly on screen and on print outs. I have checked on various machines and result was same.
View 3 Replies View RelatedAutoCAD Inventor :: Get XYZ Angle Based On Its XYZ Vector?
Nov 7, 2012How to get XYZ angle based on its XYZ vector?
There is a value for XYZ angle in iProperties of an occurrence but how to get using VBA.
Any program how to get the property or how to convert XYZ Vector to XYZ angle?
AutoCAD Inventor :: Lighting Shaded View
Oct 31, 2007when you have an view in shaded mode, there is automatically some lighting from the rightside. This gives the model/view some shadow look ( white turns into light gray by example).
The lightning style in the assembly/part environment has no influence on the shaded view.
AutoCAD Inventor :: Can Mechanical Desktop 2009 Be Installed With 2013
Jul 9, 2013Can Mechanical Desktop 2009 be installed with Inventor 2013?
View 5 Replies View RelatedAutoCAD Inventor :: Extract Drawings Based On 3D Model
Jun 2, 2013Our team is doing program customization in Inventor 2011 that extract drawings based on 3D model. When the program runs and reached the line that has either open, close and save method, Inventor program automatically terminated and “Inventor Send Error Report” appears. When we tried to debug the program and when it reached the line that has either open, close, and save method, we force to exit our customized program but the same case, when it is totally terminated, Inventor program also terminated and “Inventor Send Error Report” appears. When we investigate the problem, we tried several solutions such as setting the active document to new variable, added a method to pause the program for few seconds, etc but still no effect.
Is there a VBA for Inventor that is intended for 64 bit machine? Because I think we use 32 bit VBA in Inventor. What does “Inventor32bitHost.exe” means in task manager? Is there any relation to Inventor VBA?
AutoCAD Express Tools :: Super Hatch Breaks Entire Area Into Separate Image Based Pieces
Jun 25, 2001We have 1 machine in the office that when using super hatch it will not "hatch" the entire area as one hatch, it breaks it into separate image based pieces. The rest of the office, it hatches as one entity so it can be changed easily. Even if we use the group command, it will not group them.
View 2 Replies View RelatedAutoCAD Inventor :: Why Lighting Only Tree Available In Styles Editor
Feb 28, 2013I am trying to add a material with a specific density to the list of materials. After looking online it looks like I need to do that with the styles editor, but when I open the styles editor the only thing that I can work with is the lighting.
View 1 Replies View RelatedAutoCAD Inventor :: Lighting Styles For Shaded Views In IDW
Apr 30, 2012I've been working with a model where some of it is in a dark shadow when I make a shaded view on the drawing. I've created a custom lighting style in the style manager, but I haven't found any way to succesfully assign that lighting style to the model in a way that will light the shaded views in my drawing. I'm using Inventor Pro 2011.
View 4 Replies View RelatedPhotoshop :: Lighting Effect Used In Image
Dec 17, 2012It is clear air brushing and skin toning was used to create the somewhat surreal skin surface. But I cannot figure out if the lighting is from the Render / Lighting Effect tool, or air brushed to emulate lighting, or something else?
When I use the PS lighting effect tool, everything turns dark in the photo outside the lit target area. Notice the shadowing on the arm and breast. It appears the light source is coming from two opposite directions. Like if this is a multi-layer process, etc. Not asking for a hand-holding tutorial.
