when you have an view in shaded mode, there is automatically some lighting from the rightside. This gives the model/view some shadow look ( white turns into light gray by example).
The lightning style in the assembly/part environment has no influence on the shaded view.
I've been working with a model where some of it is in a dark shadow when I make a shaded view on the drawing. I've created a custom lighting style in the style manager, but I haven't found any way to succesfully assign that lighting style to the model in a way that will light the shaded views in my drawing. I'm using Inventor Pro 2011.
View 4 Replies View RelatedI've been running into issues in IV 2010 with the shading where I need to show a part in a perspective view on my IDWs and depending on the angle I rotate to the majority of the part is shown in shadow. It's frustrating because I need to show a feature in that particular orientation, but the whole part looks dark.
Especially when I am showing left and right mirrored parts. One side always seems to end up dark. FYI I almost never show the material as a texture map in my part drawings so I use white as the color default because I am simply trying to get across the shape of the part in a shaded 3D view. These don't really serve as renderings to me per say. Is there any way to control the light source direction for custom views in terms of shading? Could I make it more of an ambient light or similar to the Global Light Style in Inventor Studio.
I made a drawing, but after using ilogic (ilogic is in drawing,assembly, part) in it, drawing view of a particular part is coming in hidden line, other are shaded as u can see in image.
Drawing view is associative, all edges shown, level of detail is master, view style is Hidden Line Removal with Shaded
Computer Config:
Inventor 2013
Intel Xeon CPU
2.67 GHZ
8 Gb ram
Windows 7 64 bit
When shading in an Inventor 2013 idw the display shows the shade incorrectly as some kind of sky representation (see attached). I wish for this to be displayed correctly as a grayscale shade?
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
Is there a line of code that will look at a drawing view and turn shading on?
I have tried
ActiveSheet.View("VIEW1").View.Shaded = True
but it didn't work .
We just recently upgraded to Inventor Pro 2014. I have a user who has created a singled shaded view drawing. He want to print the drawing shaded. When he prints he gets a line drawing. It even appears like a line drawing when he previews it. He gets the same results when printing to Adobe. He said it printed properly in the morning yesterday and when he tried to print again in the afternoon it would not print shaded. He rebooted this morning and he still can't print a shaded drawing from Inventor. We looked at his printer settings and everything looks good. He is the only one in my department who is having this problem.
Dell Precision T7500
Windows 7 x64 SP1
Nvidia Quadro FX5800
16 GB RAM
I am not able to see the model in shaded view with edges in dynamic simulation environment (Autodesk Inventor 2012).
View 6 Replies View RelatedThe acquaintance with new 2012 Inventor gave several tiny but annoying problems.
The lighting settings is not so good as 2011 and requires alterations. The View - Lighting setting is always turns to Two Light instead of desired Default. The question is how to permanently set it to desired setting in ALL project? When I create the new lighting style it is visible only in that file. How to make it visible and set by default in other files? [URL]
New 2012 has option of showing the name of part or assembly while cursor stops hovering over the object. Is it any time setting of duration of that option? It is quite annoying waiting for turning off or shutting down unwanted show up. It also either work or not work at all.
Its a stair with parts below the view level shaded black and above parts shaded as material settings. What controls the "beyond - below" shading?
View 3 Replies View RelatedIn Revit 2013 - Some elements are displaying as transparent in the 3D Shaded view. All the glass elements are showing through solid parts of the model in 3D shaded view. See the attached image.
View 3 Replies View RelatedHow can you set by default the ''shades with edges'' visual style by default ? I always work with that visual style, I have to set it every time I open a part or assembly.
View 2 Replies View RelatedI'm creating 3D architectural models; primarily interior views. I use the ANIPATH command quite frequently and I'm good there.
However, I have not been able to render a still camera view that shows the lighting and resultant shadows. Whenever I attempt to render a still from a particular camera; I set it to realistic. It shows the 3D objects with materials; however not the lighting.
I've been using ACAD for about 15 years now, and consider my skill level upper-intermediate.
So far, the only successful still renderings I've been able to do are those directly associated with the typical ortho views: i.e., NE, NW, SE, SW, front, back, etc. But no avail on rendering from the camera point of view.
I have printed an Inventor drawing with the views shaded, I noticed that the views have a gradient shade on them, is this standard or is there a way to configure IV so that the views shade in one color and not as a gradient ?
View 9 Replies View RelatedWe just switched from 2013 to 2014. I had "Shaded with Hidden Edges hotkeys to "q" in 2013,but now it's not in the
Customize menu anymore? "Shaded with Edges," is there, and my filter is set to all. I would like to have my hotkey back.
Menu: Tools/Customize/Keyboard
Inventor 2014,
I am getting display of hidden edges (in fuzzy grey with shadows, like wireframe with hidden edges) while using shaded with Edges. At first they don't display, but when I pan zoom orbit, they show up to stay. When I switch to shaded with hidded edges, the same edges turn blue. When I switch to shaded, they completely disappear. So it's the Shaded with edges view that has this problem. I have also noticed it to be random files or some unknown commonality. Files were created using Inventor 2013. I'm not running Express mode, which is much fuzzier.
I did not see this during beta testing. I have a Radeon HD 5990 (2GB) - running like a champ, Intel I7- 930, and 12GB ram running Windows 7 (ultimate) 64bit. Inventor 2013, and 2014 are both installed.
I am now making drawings of complexed structures and would like to draw attention to some elements that are important for particular drawing.
What I would like best would be to be able to schade selected parts. But did not find a way to do that.
You would like to have an option to disable reflections in the shaded views that you create.
We introduced from Inventor 2010 support for disabling reflections in drawings. In order to do this, users need to add DWORD registry key named "Suppress Specular Color" with value greater than zero under the following registry key.
Note:
Prior to creating this registry key, you need to have the following hotfix installed for Inventor 2010:
[URL]
For Inventor 2011, you need to have SP1 installed.
Open the system registry and locate the following registry keys listed below (Start > Run > RegEdit):
1. Inventor 2010
[HKEY_CURRENT_USERSoftwareAutodeskInventorRegistryVersion14.0AppletsDrawingLayoutPreferences]
Create a key with this value:
"Suppress Specular Color"=dword:00000001
2. Inventor 2011
[HKEY_CURRENT_USERSoftwareAutodeskInventorRegistryVersion15.0AppletsDrawingLayoutPreferences]
Create a key with this value:
"Suppress Specular Color"=dword:00000001
If the key is not present or its value is zero or less, then reflections are enabled under drawings (Default behavior).
Note: The key is read only once per Inventor session - after adding the key or changing its value, users need to restart the Inventor session.
I believe this issue started when I upgraded to Inventor Professional 2014. When I print idw files with shaded models on my HP Designjet 500 plotter I get white streaks in the shaded model. I never had this issue with the 2013 version of Inventor. If I export the same idw file to a pdf then print the pdf file there is no streaking and the printed drawing is okay. Thinking it was a Designjet issue I spent a couple days on HP's discussion group to find a solution but now it looks like a software issue.
View 9 Replies View RelatedHow do I get my part to be transparent in the "Realistic" view like it is with the"Shaded with edges"? This is what it looks like with the view style set to "Shaded with Edges". Notice how it is transparent and you can see thru the part.
Now when I switch to "Realistic", I get this. Anything that is behind this part is not visible.
I want to be able to see thru the part when in the reallistic visual style.
I have an interesting question here - How should I try to shaded render this syringe so that a plunger can be seen underneath the translucent body? I need to have the gradiations and labels of the millileters be plainly black.
OR
is there a way to keep those gradations black while rendering an illustration and have the plunger visible beneath the body?
The gradiations are cut into the body of the syringe in this model, and the surfaces of the gradiations are changed to black.
Have been adjusting the color styles - but perhaps I'm missing something. Making the material translucent just fades the gradiations on the syringe, I'd like.
Would like to have this script in my template for assemblies. So when user opens up the assembly it changes the visual style automatically.
View 2 Replies View RelatedIs it possible to have an Assembly and/or Presentation as a drawing (.dwg) with a Visual Style of Shaded with Edges? In particular my black .ipt parts look just fine with white/grey edges except when placing the view in a drawing.
View 8 Replies View RelatedI am trying to add a material with a specific density to the list of materials. After looking online it looks like I need to do that with the styles editor, but when I open the styles editor the only thing that I can work with is the lighting.
View 1 Replies View RelatedJust started having a play with ray tracing in Inventor 2013 Pro & I'm quite impressed how quickly you can get a rendered view of a model. However, it seems no matter how I set up the lighting or the shadows in the 'Settings' menu when I click on 'Tay Tracing' it seems to default back to some original settings. The shadows & lighting in any of the drop down menus don't seem to be applied. eg. I select 'Two Lights' from the menu, then select 'Settings' I then adjust the shadows & the lights from within the menu. It all looks good on the screen & click Ray Tracing & everything that I've done doesn't get applied? However, when I cancel & stop the Ray Tracing the shadows & Lights are still there.
View 1 Replies View RelatedCan I add more Image based lighting images besides the one come installed such as (old warehouse, dry salt bed)?
If yes how could i do it
when I am trying to use the lighting style scenes (such as old warehouse) I get this message "Cannot find the source Oldwarehouse of the image based lighting" and the background image does not appear I only get the same old gradient backgroud. (see attached file)
I know the IBL files exist and know where they are but I have moved the folders from the default location on my C: drive due to space reasons and changed the respective filepaths in the application options. However it seems inventor has not understood that the path to these IBL background files has changed... is there some filepath setting somewhere that I have missed?
I am using inventor 2013.
Since version 2013 we got problems with how colours appear in the drawings.
They turn very dark. See the attached files.
It's important to us that white really shows as white.
Is there a way to get sheet number of the base view for the Selected Child view (Mainly for Section. Detail Views). Because the Section views, Detail views (initially they would have created on the same sheet where the parent is, then they moved to different sheets). So we place the parent view sheet number.
View 1 Replies View RelatedI started with a Left side view of a part and created a sectioned view right down the middle so you can see the insides from another view. the part is pretty big so i used a Break to shorten it to fit the page. I also placed a smaller and separate isometric view of the same part and want this view to inherit the same break. How can I do this? If I go into the display options of the iso view, all the cut inheritance options are grayed out and can't be clicked. I've seen this done before, but i'm sure i missed a step somewhere.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
Is it possible to have the parent view for the section in one drawing and the child views in another drawing?
View 2 Replies View Related