I have a new computer with 2012 Autocad LT. My settings are from 2010 Autocad LT. I can only figure out how to import my settings if they are from my current system or migrate my settings if I have an old version of Autocad installed on my computer which I don't. How do I get my 2010 settings into my 2012 autocad LT on my new computer?
View 3 RepliesIst it o.k. or recommneded to have both the 2012 and 2013 versions of AutoDesk Product Design Suite - Premium installed on the same computer? Our design engineers would like this so they can learn the new version while still using the old version, but I'm concerned about the two versions conflicting with each other on the same PC.
View 2 Replies View RelatedI hate having to setup one pc to all the autocad setting that we need and then having to go do 27 more. I want to take my exact setup, menu, system variables, colors, file locations...everything and apply it to 27 more computers. We have tried using profiles but it only coppies over a few things and some are still missing. Is there are way to copy everything?
View 9 Replies View Relatedhow I can move a user from one computer to another and have them keep all of their settings in AutoCAD Architecture 2013.
We are upgrading user laptops. I have used the Windows 7 Easy File Transfer utility on the first couple, but it does not appear to copy the users AutoCAD settings. When they open AutoCAD for the first time on the new computer, they have to set up all of their toolbars, etc again.
I have even tried copy and paste of theWin 7 AppData Local, LocalLow and Roaming folders ... but even that does not tranfer over the toolbars, menus, etc...
make it so that when a user logs into the new computer and opens AutoCAD, it is exactly as it was on the old computer?
Is it possible to migrate settings from Autocad 2011 to Autocad 2012 on 2 different computers.
Bought new computer and installed Autocad 2012. I never installed Autocad 2012 on old computer.
Am I forced to load 2011 on new computer, migrate settings from old computer and then migrate settings to Autocad 2012.
I want to know if I can get a compacted guide into quickly and effectively save all my autocad settings in a computer to be used elsewhere.
My personal settings include:
1. alias
2. autolisp that are loaded in the cui
3. an escape autolisp that is part of the right click context edit menu
4. re-arrangement of short cut menu (i.e addition of dimension linear, dimension aligned, plot)
5. new menu with new macros
6. option profiles
7. plot styles
8. hatches
9. libraries of block
10. palette
11. workspace
I know the list is long and can be longer and most of the time as I switch from one computer to another, there is the same repetitive task of copying, resettings and so on. Are there any effective way to transform an autocad post with all my settings at once, that effectively save all the settings and the files and the blocks and templates and effectively load all of them onto a new working post.
Somewhere it looks impossible, at least in its totality but who knows this may be possible.
One of our drafters recently got a new computer. We installed AutoCAD 2013 on the new machine. He was using AutoCAD 2012 on the old machine.
After exporting the settings from 2012, I attempted to import them into 2013. The migrate tool throws an error that insinuates you must have the old version installed on the same computer in order to migrate the settings. The import tool states that it can only import settings from the same version of AutoCAD.
How does one go about importing settings from one computer running AutoCAD 2012 onto another computer running AutoCAD 2013?
(In particular, the user is looking to migrate over his custom tool palette.)
Can I transfer my Photoshop CS5 for PC to my new IMac computer .
View 4 Replies View RelatedI recently purchased a new desktop computer and wanted to migrate my custom settings from my older laptop using the export utility. I successfully exported the zip file but when importing to the new computer, I get this message: "This file is not an AutoCad LT2012 - English Migration Package".
I have repeated the export to several different media (flash drive, cloud folders) with the same result when attempting to import the file.
I have tried so many times to remove Photoshop cs6 pre-release, but without any success.
I have downloaded Photoshop cs6 extended from this link:
[URL].........
I put it in the bin first and emptied the bin when actually I shouldn't have done so. So I tried the cleaner
[URL]........
I've put first to remove cs5 , cs5.5 and cs6. then I did it again with cs6 alone. I've restarted my computer. Still doesn't work, I always get the message:
"A conflicting or prerelease version of adobe Photoshop exists on this computer (...) "
I have searched previous similar topics about the same problem, no success.
My computer HDD died :-( Luckily, I have made full HDD backups quite regularly and haven't really lost anything.
However, I'm making a clean install of everything to get a fresh start. Over the years, I have built up quite a large set of LR Develop and Export presets along with several custom lens profiles and camera colour calibrations. Having started from LR2 then upgraded 'in place' over the years, I have a feeling the files for all these might be scattered all over the place on my Windows 7 installation/appdata files.
Apart from the obvious catalog file, where else should I be looking to get my fresh LR5.2 installation looking like it used to with a full recovery of all my various profiles and presets?
I think I found a few in my backed up %appdata% files but there is so much in there, I don't know what is essential and what is just 'junk' from older versions.
The crashing is consistent every time I try this. Here is how I replicate the problem:
- Open a SheetSet.
- Right click on the sheetset and select Transmittal Setups.
- Click import.
- Select a template DST and click open.
- Check a setup and click import checked.
Civil 3D Locks and an error saying "AutoCAD Application has stopped working" pops up and whamo. I have custom eTransmit settings and here they are just in case,
[HKEY_CURRENT_USERSoftwareAutodeskAutoCADR19.0ACAD-B000:409ETransmitsetupsBack-Up]
"AEC_EXPLODE_DWG"=dword:00000000
"Name"="Back-Up"
"AEC_TEMP_SETUP"=dword:00000000
"AEC_INCLUDE_PROJ_INFO"=dword:00000000
[code]....
I have created a profile showing existing and finish grade. I can't seem to control the appearance of the existing grade line and the finish grade line individually. I need finish grade to be color 161 and existing grade to be color 252, but whatever I set as a color applies to both.
I have done this in the past with no trouble at all, but can't seem to get it to work now. I even tried importing settings from drawings with that display, but nothing has worked yet.
Have just migrated to new PC (Ver 7) from an CP machine. LR 2.7 is loaded on the new machine and I have a folder called Photo Universe that contains 15,000+ photos with keywords, modifications, etc. Quustion is how to import the existing folders and photos so that my previous keywords, configurations and settings carry over as well.
I tried "Selecting All" sub folders, but that didn't work. I guess I'm hoping and looking for a silver bullet. On the other hand, I'll do whatever it takes to make this happen.
I am importing my images to another computer. When I did this all the adjustments that I had made to my images in Lightroom are gone and the filter notes.
How do I import these images and not loose the work I have doen to them?
Quick question How do I import my gradient map settings from CS3 on my old I mac into my new Mac that uses CS6? Is there a folder somewhere that I can just copy and paste?
View 2 Replies View RelatedAt home I still have the trial version (I wait for 4.2 to see if it will be much faster before buying it) and today I do some photo development at work (we also have 4.1 version).
What I'd like to know is it it's possible to import the processings settings of each photos to my own catalog ????
Here is how I did my work:
At home my raws are on an external USB drive and I import my pictures from this disk: path is I:Mes photos<subject + date of the photoshoot> My Lightroom catalog is in it's default path (user profile, my pictures).
At work, I put my photos on a temp director c:MyRawPictures and import them into lightroom.
Now how can I export the development settings from the lightroom at work and import them in my home setup ?
I saw a menu "import from another catalog". can I use this one ? If yes, do I need to copy the "Lightroom catalog" folder ?
I can't remember how to import a ctb file into my plot settings for a drawing?
View 9 Replies View RelatedI just transferred 10,000 photos... all tagged beautifully in my previous computer..that are no longer tagged. I installed Elements 6 and imported the photos along with tags according the screen, but once the import is done less than 100 of the photos are actually tagged. I also have a newer version of elements that I want to use on this computer but thought I should try to make the original version work before upgrading. What do I need to do to get the tags back?
View 2 Replies View RelatedHow do I import the pictures I have in my picture folder in my computer into the Adobe Elements files?
View 1 Replies View RelatedI recently upgraded to a new Macbook Pro and have been trying to transfer over my old LR4 files to the new computer. I reinstalled LR4 on the new Mac and imported my old photo Catalouge from my External Drive. But when the folders, and pictures appear in the new LR none of my edits/presets/or information is shown. They are just the RAW files.
This cataloug was the same cataloug that I was using on my old computer. On that computer all edits and information came up correctly.
My problem is that when I'm importing photos from my folders on the computer to my catalog in Lightroom 4, Lightroom doesn't import all photos from my folders. It imports the first 3-4 photos rom my folder.
View 1 Replies View RelatedI've just upgraded from Elements 4 to 11 using Mac OS 10.6 Previously, when I wanted to import an image from my Canon 8600F Scanner I went to File,Import,Canoscan 8600 and the Twain driver window appeared. No problem.Now with 11 this doesn't happen. It doesn't happen with either Editor or Organizer. A search on these pages shows a similar problem with Elements 10. I've carried out this procedure but it doesn't work. Why not? What is the point of this programme if it won't import from a scanner or am I missing something?
View 5 Replies View RelatedYesterday I had to uninstall my cs6 and reinstall it to recognize new RAM I installed. Today in Photoshop the print settings work in the 32 bit version but do not work in the 64 bit version of Photoshop.
View 4 Replies View RelatedI just installed PS-CC and LR5 on a new computer after a catastrophic failure on the old one, which was running PS-CS6 and LR4. Is there a way to recover my custom settings and presets from a full backup of the old computer and apply them to the new applications on the replacement computer? I have full backups, but no export data for any of the settings or presets. And because the old computer is dead, I can't just run an export.
View 7 Replies View RelatedI have a JPG file that I've created in Lightroom from a RAW file.
My computer has crashed at some point, and I lost everything, but I managed to save the original RAW file.
Is it possible to recover the development settings from the JPG file, in order to re-edit the orignal RAW file (so I could make changes right from where I left off)?
do any camera setting (portrait , landscape,contrast,saturation,etc,) matter when importing raw.
View 2 Replies View RelatedMy Lightroom catalogue crashed, and i started a too old backup version. By importing new files, lightroom does show the older files in the importfield, are they still there? I desperately need them back,
View 4 Replies View RelatedI am unable open some part files and assebly files which are made in 2012 version. I have 2011 version.
View 2 Replies View Relatedhow to move a file in inventor from the 2014 version to last years version which was 2013 because my teacher's computer isn't reading my file.
View 5 Replies View RelatedI have recently upgraded to ver 2012 from ver 2000. I have numerous macros that were written for the older version that I need to utilize in ver 2012. I manually recreated them in the new version by typing in the commands from ver 2000. As I expected I am getting errors when I try to run these macros in Ver 2012. The mlayer command, for example, does not work. I am pretty sure I need to use the -layer command and have tried this but I still get errors. While I am relatively proficient in ver 2000 I am having some trouble finding commands in ver 2012 that match the old version. Below is an example of a macro from ver 2000 as well as my attempt to rewrite it in ver 2012.
^C^C(mlayer "notes" "cyan" nil) -insert;B6;insert;;;;$S=NUMB0
my rewrite:
^C^C(-layer;m;"notes" "cyan" nil) -insert;B6;insert;;;;$S=NUMB0